WORKPRO

Thank you for purchasing a WORKPRO product. Your 2-in-1 adjustable wrench has been engineered and manufactured to WORKPRO's high standards for dependability, ease of operation, and operator safety. When properly cared for, it will provide years of rugged, trouble-free performance.

WARNING

To reduce the risk of injury, the user must read and understand the operator's manual before using this product.

• Do not use on live circuits.
• Do not use the wrench for applications beyond its intended use.
• Do not use the wrench if it is damaged or worn.
• Wear safety glasses or goggles, or a face shield (with safety glasses or goggles) and protective gloves when using this product.
• Do not use excessive force when tightening or loosening nuts or bolts.
• Keep fingers and other body parts clear of the jaws when using the wrench.
• Do not use the wrench as a hammer or pry bar.
• Always use the wrench in a well-lit area to avoid accidents.
• Keep the wrench away from children and untrained individuals.

FEATURES

• Drop forged CR-V steel construction with a corrosion-resistant chrome plated finishing for durability.
• Reversible jaw design can be used both as an adjustable wrench and pipe wrench.
• The wrench features three modes:
  • Adjustable Wrench mode: Maximum jaw opening of 42mm.
  • Reversible Jaw: The jaw can be flipped to change the wrench's function.
  • Pipe Wrench mode: Maximum jaw opening of 38mm.
• Precision-machined slide jaw and worm gear allow for exact fastener fit and smooth adjustment.
• Accurate laser-etched measurement scale for easy use.
• Non-slip and ergonomic handle design ensures safety and reduces fatigue.
• Ideal for home, garage, workshop, plumbers, metalworkers, construction workers, mechanics, hobbyists, and DIY enthusiasts.

OPERATION INSTRUCTION

• Determine the size of the nut or bolt to be tightened or loosened.
• Adjust the jaws of the wrench by turning the adjusting mechanism until they are the correct size.
• Place the jaws of the wrench over the nut or bolt and adjust the grip by turning the adjusting mechanism until the jaws are tight.
• Turn the wrench in the desired direction to tighten or loosen the nut or bolt.
• If you want to change the wrench's usage, you can take out the jaw and reverse it to use it as an adjustable wrench or pipe wrench.

CLEAN AND MAINTENANCE

• Keep the wrench clean and dry, and store it in a ventilated and dry place to prolong its service life.
• Regularly check the adjusting mechanism for any signs of wear or damage.
• Lubricate the adjusting mechanism with a light oil to ensure smooth operation.