GAMDIAS ATLAS M3M Mini-Tower Gaming PC Case

Case Layout and Parts Identification

The GAMDIAS ATLAS M3M case is designed for efficient component installation. Key components and their locations are illustrated.

Package Contents:

• Front Tempered Glass
• Left Tempered Glass
• Top Tempered Glass
• Right Side Panel
• PCIe Slot Cover
• Rear Fan
• Side Fan
• 10 Port Module
• HDD/SSD Cage
• Fan Hub
• Bottom Dust Filter
• Chassis Pedestals

Included Hardware:

• Motherboard additional standoffs (x3)
• HDD cage screws (x9)
• PSU/GPU PCIe screws (x6)
• Motherboard/ SSD screws (x18)
• Zip Ties (x1)

Component Installation

Motherboard Installation (hidden connector)

Install the motherboard by aligning it with the standoffs and securing it with the provided screws. Ensure all necessary connectors are accessible.

Power Supply Unit (PSU) Installation

Mount the PSU in its designated bay and secure it with screws. Connect the necessary power cables to the motherboard and other components.

3.5" & 2.5" HDD/SSD Installation

Utilize the HDD/SSD cage for mounting storage devices. Secure the drives with the appropriate screws and slide the cage into place.

Fan and Cooling System Setup

The ATLAS M3M supports multiple fan configurations for optimal cooling. Install fans in the designated front, side, and rear locations.

Fan Hub

Connect fans to the Fan Hub for centralized control and management of cooling performance.

GPU Installation

Install the graphics card into the PCIe slots. Secure the card with the provided PCIe screws. Ensure proper ventilation and clearance.

Front Panel I/O and Connections

Connect the front panel cables to the motherboard:

• Power Switch
• Reset Switch
• HDD LED
• Power LED
• USB 3.0
• USB 3.1 (Type C)
• HD Audio
• ARGB LED Switch

Refer to the motherboard manual for specific header locations.