Aldes TO GALVA - D315/160 Galvanized Steel 45° Oblique Tee
This document provides technical information for the Aldes TO GALVA - D315/160, a galvanized steel oblique tee designed for rigid, aluminum, and special ductwork systems.
Product Description
The 45° oblique tee (TE 45°) allows for the connection of two branches of galvanized ductwork at a 45° angle. These oblique tees are recommended over 90° tees for supply air systems, ensuring leak-free installation and minimizing pressure drop at the branch connection.
Applications
This product is suitable for:
- Residential buildings (new and renovation)
- Tertiary sector buildings
Installation
- Easy assembly via push-fit connections: ducts are female, and fittings are male.
- Sealing is achieved using mastic and/or perforated tape.
- Fixing to the ductwork is done using self-drilling screws (4 to 6, depending on diameter).
Reference Application
- Connection of two ductwork branches at a 45° angle in tertiary and collective residential systems.
- Particularly effective for supply air compared to a 90° tee.
Description
- Galvanized steel oblique tee with a diameter of 315/160 mm.
Key Features
- Available in diameters ranging from 80 mm to 900 mm.
- Made from galvanized steel conforming to EN 10346 standard, ensuring coating regularity.
- Fire classification: MO.
General Data
| Reference | Main Material | Nominal Diameter (mm) | Fire Classification |
|---|---|---|---|
| 11093232 | Galvanized Steel | Ø A: 315, Ø B: 160 | MO |
Diagram: The diagram shows an oblique tee fitting with dimensions labeled Ø A and Ø B, indicating the main duct diameter and the branch duct diameter respectively.
Regulatory Data
| Reference | Fire Classification |
|---|---|
| 11093232 | MO |
For more information, please contact your Aldes advisor. Visit www.aldes.com.
RCS Lyon 956 506 828 - Aldes reserves the right to make technical modifications to its products. Information is non-contractual.
