Aldes TO GALVA - D500/400
Reference: 11093251
Product Type: 45 Degree Galvanized Steel Tee Fitting
Product Description
The TO GALVA 45° fitting allows the connection of two branches of galvanized ductwork at a 45-degree angle. TO fittings are recommended over 90° tees for supply air systems, ensuring leak-free and efficient connections at the branch takeoff.
Application Areas
Residential collective housing, new construction, renovation, tertiary sector premises.
Installation
- Easy assembly of fittings through push-fit connection: ducts are female, fittings are male.
- Sealing achieved using mastic and/or perforated tape.
- Fastening to the duct using self-drilling screws (4 to 6, depending on diameter).
Reference Application
Application: Connection of two duct branches at a 45-degree angle in tertiary and collective housing systems.
Performance: Particularly effective in supply air systems compared to a 90° tee.
Description
Oblique tee in galvanized steel, diameter 500/400 mm.
Main Characteristics
- Available in diameters from 80 mm to 900 mm.
- Galvanized steel conforming to standard EN 10346, ensuring coating regularity.
- Fire classification: MO.
Dimensional Data
| Reference | Ø A (mm) | Ø B (mm) |
|---|---|---|
| 11093251 | 500 | 400 |
Diagram: A visual representation shows a 45-degree oblique tee fitting with dimensions labeled Ø A and Ø B.
Regulatory Data
| Reference | Fire Classification |
|---|---|
| 11093251 | MO |
