VonHaus 2500264 600W Pole Trimmer

Important Safety Instructions

Please read all instructions carefully before use and retain for future reference.

Intended Use: Only operate the power tool/machine for its intended purpose and within the parameters specified in this manual. This power tool/machine is for domestic use only. Do not use outdoors or on wet surfaces.

General Precautions:

• Do not allow to be used as a toy. Children should be supervised to ensure they do not play with the power tool/machine.
• If the power tool/machine is not functioning properly, has been dropped, damaged, left outdoors, or immersed in liquid, do not use. Contact DOMU Brands Customer Services.
• Do not use the power tool/machine if any parts appear to be faulty, missing or damaged. Ensure all parts are securely attached before use.
• Risk of Personal Injury: Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. Prevent unintentional starting. Ensure the switch is in the off position before connecting to the power source and/or battery pack, picking up or carrying the tool. Always wear eye protection. Do not expose power tools to rain or wet conditions. Stay alert, watch what you are doing and use common sense. Do not use a power tool/machine while you are tired or under the influence of drugs, alcohol or medication. Use personal protective equipment. Remove any adjusting key or spanner before turning the power tool/machine on. Do not overreach. Keep proper footing and balance at all times. Dress appropriately. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts.
• Work Area Safety: Keep work area clean and well lit. Do not operate power tool/machine in explosive atmospheres. Keep children and bystanders away while operating a power tool/machine.

General Power Tool Use and Care

• Do not force the power tool/machine. Use the correct power tool/machine for your application.
• Do not use the power tool/machine if the switch does not turn it on and off.
• Disconnect the plug from the power source and/or the battery pack before making any adjustments, changing accessories, or storing power tool/machine tools.
• Store idle power tool/machine out of the reach of children and do not allow persons unfamiliar with the power tool/machine or these instructions to operate the power tool/machine.
• Maintain power tool/machines. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool/machines operation. If damaged, have the power tool/machines repaired before use.
• Keep cutting tools sharp and clean.
• Use the power tool/machine accessories and tool bits in accordance with these instructions, take into account the working conditions and the work to be performed.

Cleaning & Maintenance

• Never soak or immerse electrical components and or a component that has a plug attached.
• Disconnect the plug from the power source before making any adjustments, changing accessories, or storing.
• Ensure the motor has fully stopped before cleaning, clearing a blockage, checking, or carrying out any maintenance on the tool.
• Maintain your power tool. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired by a qualified repair person before use.
• Keep cutting tools sharp and clean.
• Regularly check external nuts and fixings to ensure vibration caused by normal use has not begun to loosen them.

Technical Specification

• Rated Voltage: 220-240V
• Rated Power: 600W
• Rated Frequency: 50Hz

Component List

The following components are included with the product:

• 1. Rear Handle
• 2. Safety Switch
• 3. Rear Handle On/Off Trigger
• 4. Cable Relief
• 5. Shoulder Support Strap
• 6. Foam Grip
• 7. Hex Key & Storage
• 8. Telescopic Lock Handle
• 9. Telescopic Pole
• 10. Quick Release
• 11. Front Handle / On-Off Trigger
• 12. Motor Unit
• 13. Angle Adjustment Button
• 14. Guard
• 15. Dual Action Cutting Blades
• 16. Blade Cover
• 17. Support Strap
• 18. Rotation Switch

Operation

The pole trimmer can be used at three different lengths:

• Mid Length: For general use.
• Full Length: For reaching higher areas.
• Short Length: For closer trimming.

Assembly:

• Attach the front handle (11) to the telescopic pole (9).
• Secure the cutting blades (15) with the guard (14).
• Adjust the angle of the cutting head using the Angle Adjustment Button (13).
• Attach the support strap (17) for comfortable use.
• Ensure the rotation switch (18) is set correctly for your needs.

Working Position:

• Adjust the shoulder support strap (5) and the main harness (17) for a secure and comfortable fit.
• Ensure the tool is balanced and easy to maneuver.

Declaration of Conformity

We: DOMU Brands Ltd, 5th Floor the Tower, Deva City Office Park, Manchester, M3 7BF

Declare under our sole responsibility the product:

SKU: 2500264

Description: 600W Pole Trimmer

Complies with the essential requirements of the following Directives:

• 2006/42/EC
• 2014/30/EU
• 2011/65/EU
• 2000/14/EC

And the standards:

• EN 60745-1:2009+A11, EN 60745-2-15:2009+A11
• EN ISO 10517:2009/A1:2013, AFPS GS 2014:01 PAK
• EN 55014-1:2017, EN 55014-2:2015
• EN 61000-3-2:2014, EN 61000-3-3:2013

Authorised signatory on behalf of DOMU Brands Ltd.

Customer Service & Warranty

For assistance with your product, please contact hello@domu.co.uk (UK/EU) or usasupport@domubrands.com (US).

To register your product and qualify for an extended warranty, visit www.vonhaus.com/warranty. Please retain your proof of purchase.

Disposal Information

Please recycle where facilities exist. Check with your local authority for recycling advice.