Vonhaus 2500265 20V Cordless Grass Trimmer

Important Safety Information

General Precautions:

• Only operate the power tool/machine for its intended purpose and within the parameters specified in this manual.
• This power tool/machine is for domestic use only.
• Not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless supervised or given appropriate instruction.
• Do not allow children to play with the power tool/machine.
• If the power tool/machine is not functioning properly, has been dropped, damaged, left outdoors, or immersed in liquid, do not use. Contact DOMU Brands Customer Services.
• Do not use if any parts appear to be faulty, missing or damaged. Ensure all parts are securely attached before use.

Risk of Personal Injury:

• Avoid body contact with earthed or grounded surfaces.
• Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/or battery pack, picking up or carrying the tool.
• Do not operate in explosive atmospheres (flammable liquids, gases, dust). Power tools create sparks.
• Always wear eye protection that complies with ANSI safety standard Z87.1.
• Do not expose power tools to rain or wet conditions.
• Stay alert, watch what you are doing, and use common sense. Do not use while tired or under the influence of drugs, alcohol, or medication.
• Use personal protective equipment: eye protection, dust mask, non-skid safety shoes, hard hat, or hearing protection as appropriate.
• Remove any adjusting key or spanner before turning the power tool/machine on.
• Do not overreach. Maintain proper footing and balance.
• Dress appropriately. Do not wear loose clothing or jewellery.
• Keep hair, clothing, and gloves away from moving parts.
• Use dust extraction and collection facilities if provided.
• Keep work area clean and well lit.
• Keep children and bystanders away while operating.

General Power Tool Use and Care:

• Do not force the power tool/machine. Use the correct tool for the application.
• Do not use if the switch does not turn it on and off.
• Disconnect the plug from the power source and/or battery pack before making adjustments, changing accessories, or storing.
• Store idle power tools out of the reach of children.
• Maintain power tool/machines. Check for misalignment or binding of moving parts, breakage of parts. Have damaged tools repaired before use.
• Keep cutting tools sharp and clean.
• Regularly check external nuts and fixings.

Cleaning & Maintenance:

• Never soak or immerse electrical components.
• Disconnect the plug from the power source before cleaning, clearing blockages, checking, or maintenance.
• Ensure the motor has fully stopped before maintenance.

Battery Warnings (Including Button Cells, AA Batteries, Lithium Packs):

• Abuse of portable sealed secondary lithium cells and batteries may result in hazards and harm.
• Do not dismantle, open, or shred secondary cells or batteries.
• Keep batteries out of the reach of children.
• The battery pack is not fully charged out of the box. Charge before use, following manufacturer's instructions.
• Recharge only with the specified charger.
• Use only with specifically designated battery packs.
• Incorrect reassembly may result in electric shock or fire.
• Protect the battery and charger against water and moisture.
• Wipe terminals with a clean dry cloth if dirty.
• Protect the battery from heat and fire. Avoid storage in direct sunlight.
• Do not maintain secondary cells and batteries on charge when not in use.
• After extended storage, charge and discharge several times for maximum performance.
• Do not short-circuit a cell or battery. Store away from metal objects.
• Do not expose cells or batteries to mechanical shock.
• Never attempt to open the battery pack. If the plastic housing breaks or cracks, discontinue use.
• When possible, remove the battery from the appliance/power tool/machine when not in use.
• Do not leave a battery on prolonged charge when not in use or stored for extended periods.
• To facilitate cooling, avoid placing the charger or battery pack in a warm environment.
• To reduce the risk of electric shock, unplug the charger before cleaning.
• If a cell leaks, do not allow liquid to contact skin or eyes. Seek medical advice.
• Seek medical advice immediately if a cell or battery has been swallowed.
• Always observe polarity marks (+/-).
• Retain original cell and battery literature for future reference.
• When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate.
• Do not use any cell or battery not designed for the equipment.
• Do not mix cells of different manufacturers, capacity, size, or type.
• Always purchase the battery recommended by the device manufacturer.

Additional Safety Information for Battery Chargers:

• This appliance should not be used by children and/or persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge. Children shall not play with the appliance.
• Do not place any object on top of the charger or allow it to rest on a soft surface.
• Do not attempt to disassemble the charger. Take it to an electrician or tool repairer.
• Appliances/power tools/machines with Lithium-ion batteries shall only be charged with the specifically designed Lithium-ion battery charger. Do not attempt to charge with any other charger.
• Before using the charger, read all instructions, labels, and cautionary markings.
• The charger is not intended for any purpose other than charging the battery pack for this tool.
• Do not use the charger on any other voltage or rating than stated on the rating plate.
• Do not use an extension cord unless absolutely necessary.
• Never attempt to connect two chargers together.
• Use the battery charger indoors only.
• Ensure the charger cable is positioned where it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
• Do not operate the charger in a cabinet or other enclosure unless ventilation is adequate.
• Never place the appliance/power tool/machine or charger near or over a heat source.
• Never charge your Lithium-ion battery below or above temperatures recommended as this may result in fire or permanent damage. Recommended charging temperatures: 20°C/68°F to 25°C/77°F.
• Do not allow water or any other liquid to come into contact with the charger.
• DANGER: Do not use the charger if it has been subjected to a heavy knock, dropped, or otherwise damaged. Take it to an authorized service centre.
• Do not attempt to disassemble the charger.
• To reduce risk of damage to the electric plug and cord, pull by the plug rather than the cord when disconnecting.

Technical Specification

• Rated Voltage: 20V MAX
• Rated Charger Input: 100W-240W~ 50/60Hz
• Rated Charger Output: 22V ===, 1.5A

Component List

1. Blade Holder
2. Motor Unit
3. Flower Guard
4. Handle Adjustment
5. Rotational Adjust
6. Extender Lock
7. Auxiliary Handle Mount
8. Power Trigger
9. Safety Trigger
10. Battery Cavity
11. 20V MAX Battery
12. LED Indicator
13. Indicator Button
14. Battery Release Button
15. Charger
16. Trimmer Blades
17. Auxiliary Handle
18. Safety Guard

Assembly

Safety Guard:

• Push the Safety Guard (18) under the Blade Holder until it 'clicks' into position.
• Ensure the edges of the Blade Holder and Safety Guard (circled) align before use. If they are not aligned, the Safety Guard has not been fitted correctly.

Auxiliary Handle:

• Attach the Auxiliary Handle (17) as shown in the diagram.

Trimmer Blades:

• 2-3 blades per cut is the average used for a small to medium sized lawn.
• Blades are not to be used on any other organic material than grass.
• If blades encounter any material denser than grass (e.g., lawn edging, paving, fencing, stone/wood borders), they may become dislodged or snap.
• Use the flower guard as a guide to prevent blades hitting lawn edging, paving, fencing, or stone/wood borders.

Handle Adjustment:

• Adjust the Handle Adjustment (4) as shown in the diagrams.

Rotational Adjust:

• Use the Rotational Adjust (5) as shown in the diagrams.

Operation

Edge Guide Wheel:

• First, rotate the Motor Unit 90°.
• Adjust the angle of the Motor Unit to be at a horizontal setting.
• Position the Edge Guide Wheel (A) on the ground for edge mode.
• While edging, allow the tip of the Blade to make contact.
• Do not force the Blade.
• The wheel helps to prevent the unit from touching the ground.
• Take extra caution while edging as objects can be thrown from the Blade.

Flower Guard:

• Pull the Flower Guard (3) down into place.
• This protects flower beds and tree barks from being damaged when cutting close to edges. It will also help prevent any damage to the blade.
• The Flower Guard can also be used to prevent blades encountering any material denser than grass, such as lawn edging, paving, fencing, or stone/wood borders.
• If blades come into contact with harder surfaces, they may become prone to being dislodged from the blade wheel or can snap.

Maintenance

Removing the Safety Guard:

• Insert a flathead screwdriver into the cavity shown.
• Slightly push and tilt the screwdriver (1) whilst pulling the Guard towards you at the same time (2).
• Take extra care not to snap any of the Guard as this may prevent it being reattached securely for future use.

Battery Charging

Charging the Battery:

• Plug the Battery Charger (15) into a suitable mains power outlet.
• Insert the Battery (11) into the top of the Battery Charger (15) to begin charging.
• The green indicator lights on the Battery will indicate charging.

Level of Charge:

• Pressing the Charge Indicator Button (13) will indicate the level of charge:
• 1 light flashing = Battery is low/requires charging.
• 2 solid green lights = Battery is partially charged.
• 3 solid green lights = Battery is fully charged.

Note: You can also press the Charge Indicator Button whilst the device is charging:

• If the Charge Indicator Lights turn green and flicker, the battery is charging.
• If the Charge Indicator Lights turn green and do not flicker, the battery is fully charged.

Disposal Information

Please recycle where facilities exist. Check with your local authority for recycling advice.

Customer Service

If you are having difficulty using this product and require support, please contact support@vonhaus.com.

Warranty

To register your product and find out if you qualify for a free extended warranty, please go to www.vonhaus.com/warranty. Please retain a proof of purchase receipt or statement as proof of the purchase date. The warranty only applies if the product is used solely in the manner indicated in the warnings page of this manual, and all other instructions have been followed accurately. Any abuse of the product or the manner in which it is used will invalidate the warranty. Returned goods will not be accepted unless re-packaged in its original packaging and accompanied by a relevant and completed returns form. This does not affect your statutory rights. No rights are given under this warranty to a person acquiring the appliance second-hand or for commercial or communal use.

Copyright

All material in this instruction manual are copyrighted by DOMU Brands. Any unauthorised use may violate worldwide copyright, trademark, and other laws.

Thank You

Thank you for purchasing your product/appliance. Should you require assistance with your purchase, please contact us at support@vonhaus.com.

VonHaus is a registered trademark of DOMU Brands Ltd.

Made in China for DOMU Brands Ltd.

Unit 30, Stakehill Industrial Estate, Middleton, Manchester, M24 2RW

EU Authorised Representative: Authorised Representative Service, 77 Camden Street Lower Dublin, D02 XE80 Ireland