IKEA HOPPVALS Assembly Instructions
This document provides instructions for assembling and installing the IKEA HOPPVALS cellular blind. Please read all instructions carefully before beginning assembly.
Important Information
As wall materials vary, screws for fixing to the wall are not included. For advice on suitable screw systems, contact your local specialized dealer.
The following languages are supported in this document: English, Deutsch, Français, Nederlands, Dansk, Íslenska, Norsk, Suomi, Svenska, Česky, Español, Italiano, Magyar, Polski, Eesti, Latviešu, Lietuvių, Portugues, Româna, Slovensky, Български, Hrvatski, Ελληνικά, Русский, Українська, Srpski, Slovenščina, Türkçe, 中文, 繁中, 한국어, 日本語, Bahasa Indonesia, Bahasa Malaysia, عربي, ไทย, Tiếng Việt.
Parts Included
- 2x Mounting brackets (Part numbers: 10093463, 10081418)
- 1x Cord loop holder (Part number: 157682)
Assembly Steps
- Attach the mounting brackets to the top rail of the blind. Ensure they click into place.
- Determine the desired mounting location (ceiling or wall).
- If mounting to a wall, mark the bracket positions and pre-drill holes as necessary. Use appropriate screws and wall anchors for your wall type (not included).
- Attach the mounting brackets to the wall or ceiling.
- Slide the blind's top rail onto the mounted brackets until it clicks securely.
- To operate the blind, pull the cord loop. To raise the blind, pull the cord loop upwards. To lower the blind, pull the cord loop downwards.
- Ensure the cord loop is secured with the provided holder when not in use.
Operation and Care
To raise the blind, pull the cord loop upwards. To lower the blind, pull the cord loop downwards. Ensure the cord loop is secured with the provided holder when not in use.
For cleaning, gently wipe the blind with a damp cloth. Avoid using harsh chemicals or abrasive cleaners.
Safety Information
Keep small parts away from children during assembly.
Ensure the blind is securely mounted to prevent it from falling.
