RÅGRUND Shelving Unit
Safety Warnings
⚠ WARNING ⚠
Children have died from furniture tipover. To reduce the risk of furniture tipover:
- ALWAYS install anti-tip device provided.
- NEVER put a TV on this product.
- NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
- NEVER open more than one drawer at a time.
- Place heaviest items in the lowest drawers.
[Image Description: The document displays multiple warnings in various languages regarding the danger of furniture tip-over and the importance of using the provided anti-tip device. Icons include a warning triangle and prohibition symbols for placing TVs or allowing children to climb.]
Parts List
| Part Description | Quantity | Part Identifier |
|---|---|---|
| Screw | 16x | 100006 |
| Bolt | 1x | 130608 |
| Washer | 2x | 109041 |
| Anti-tip Bracket | 1x | 100823 |
| Allen Key | 1x | 106989 |
[Image Description: Visual representation of all included parts: 16 screws (100006), 1 bolt (130608), 2 washers (109041), 1 anti-tip bracket (100823), and 1 Allen key (106989). Note: Assembly diagrams suggest more bolts may be required than listed.]
Assembly Steps
-
Attach the side supports to the shelves. Use 8x screws (100006) and 8x bolts (130608) for this step. Ensure the parts are aligned correctly.
[Image Description: Diagram showing the assembly of the shelving unit frame. Two side panels are being attached to multiple shelves using screws and bolts. An Allen key is shown being used to tighten a bolt.]
-
Repeat the process for the other side of the shelving unit. Use the remaining 8x screws (100006) and 8x bolts (130608).
[Image Description: Continuation of the frame assembly, showing the second set of side panels being attached to the shelves with screws and bolts.]
-
Secure the unit to the wall using the provided anti-tip device. Attach the anti-tip bracket (100823) to the top of the shelving unit using a screw (100823) and washer (109041). Then, attach the other end of the bracket to the wall using the appropriate wall fixing (not explicitly provided, but implied by the diagram showing a screw and washer for wall attachment).
[Image Description: Diagram illustrating the final step of securing the shelving unit to the wall. An anti-tip bracket is shown being attached to the top of the unit and then to a wall. A warning symbol is displayed, emphasizing the importance of this step to prevent tip-over.]
