8BitDo M30 Bluetooth Gamepad

Instruction Manual

General Operation

Power On: Press the [start] button.

Power Off: Press and hold the [start] button for 3 seconds.

Force Power Off: Press and hold the [start] button for 8 seconds.

Nintendo Switch Connection

Pairing Instructions:

  1. Press and hold [Y] + [start] to turn on the controller. The LEDs will start rotating.
  2. Press and hold the [pair] button for 2 seconds to enter pairing mode. The LEDs will pause briefly then resume rotating.
  3. On your Switch, navigate to Home Page > Controllers > Change Grip/Order.
  4. The LEDs will become solid when the connection is successful.
  5. The controller will automatically reconnect to your Switch with a press of the [start] button after initial pairing.

Button Mapping:

  • [star] button = Switch Screenshot button
  • [home] button = Switch HOME button

Controller Layout Description: The controller features a D-pad, a left analog stick, Start, Select, Home, L, R, L1, L2, R1, R2 buttons, and four face buttons (typically labeled A, B, X, Y in diagrams).

Android Connection (D-input Mode)

Pairing Instructions:

  1. Press and hold [B] + [start] to turn on the controller. LED 1 will blink.
  2. Press and hold the [pair] button for 2 seconds to enter pairing mode. LED 1 will pause briefly then start rotating again.
  3. On your Android device, go to Bluetooth settings, search for and pair with "[8BitDo M30 gamepad]".
  4. The LED will become solid when the connection is successful.
  5. The controller will automatically reconnect to your Android device with a press of the [start] button after initial pairing.

USB Connection: Connect the controller to your Android device via USB cable after powering it on.

Controller Layout Description: The controller features a D-pad, a left analog stick, Start, Select, Home, L, R, L1, L2, R1, R2 buttons, and face buttons (typically labeled A, B, X, C in diagrams), plus a Turbo button.

Windows Connection (X-input Mode)

Pairing Instructions:

  1. Press and hold [X] + [start] to turn on the controller. LEDs 1 & 2 will blink.
  2. Press and hold the [pair] button for 2 seconds to enter pairing mode. The LEDs will pause briefly then start rotating again.
  3. On your Windows device, go to Bluetooth settings, search for and pair with "[8BitDo M30 gamepad]".
  4. The LEDs will become solid when the connection is successful.
  5. The controller will automatically reconnect to your Windows device with a press of the [start] button after initial pairing.

USB Connection: Connect the controller to your Windows device via USB cable after powering it on.

Controller Layout Description: The controller features a D-pad, a left analog stick, Start, Select, Home, LB, LT, RB, RT buttons, and face buttons (typically labeled A, B, X in diagrams). It also includes Menu and View buttons, and a Turbo button.

macOS Connection

Pairing Instructions:

  1. Press and hold [A] + [start] to turn on the controller. LEDs 1, 2 & 3 will blink.
  2. Press and hold the [pair] button for 2 seconds to enter pairing mode. The LEDs will pause briefly then start rotating again.
  3. On your macOS device, go to Bluetooth settings, search for and pair with "[Wireless Controller]".
  4. The LEDs will become solid when the connection is successful.
  5. The controller will automatically reconnect to your macOS device with a press of the [start] button after initial pairing.

USB Connection: Connect the controller to your macOS device via USB cable after powering it on.

Controller Layout Description: The controller features a D-pad, a left analog stick, Start, Select, Home, L1, L2, R1, R2 buttons, and face buttons (typically labeled A, B, X in diagrams). It also includes a Turbo button.

Turbo Function

To activate/deactivate turbo functionality: Hold the desired button and then press the [star] button.

Note: Turbo function is not supported for the D-pad or analog sticks. It is also not available when connected to a Nintendo Switch.

Battery and Power Saving

Battery: Built-in 480mAh Li-on battery provides approximately 18 hours of playtime. Rechargeable via USB-C cable with a charging time of 1-2 hours.

Battery Status Indicators:

  • Low Battery: Red LED blinks.
  • Charging: Solid red LED.
  • Fully Charged: LED turns off.

Power Saving:

  • Sleep Mode: Activates after 1 minute of no Bluetooth connection or 15 minutes of inactivity with a Bluetooth connection.
  • To wake the controller, press the [start] button.
  • When connected via USB, the controller remains powered on.

Support

For further information and additional support, please visit: support.8bitdo.com

For firmware upgrades, please visit: support.8bitdo.cn

Models: M30, Bluetooth Gamepad Controller, M30 Bluetooth Gamepad Controller

PDF preview unavailable. Download the PDF instead.

M30 Manual ?20220513

Related Documents

Preview 8Bitdo SN30 Pro Controller FAQ and Troubleshooting Guide
Comprehensive frequently asked questions and troubleshooting guide for the 8Bitdo SN30 Pro and SN30 Pro G Classic Edition wireless controllers, covering compatibility, features, connectivity, and common issues.
Preview 8BitDo Ultimate 2.4G Wireless Controller: Setup and Features
Comprehensive guide to setting up and using the 8BitDo Ultimate 2.4G Wireless Controller for Windows and Android, including connection methods, turbo function, software customization, and battery information.
Preview 8BitDo Ultimate 2 Wireless Controller Manual and Features
Comprehensive guide to the 8BitDo Ultimate 2 Wireless Controller, detailing its features, button layout, connectivity options, and usage instructions for various platforms.
Preview 8BitDo SN30 Pro Bluetooth Gamepad: User Manual and Connection Guide
Comprehensive guide to connecting and using the 8BitDo SN30 Pro Bluetooth gamepad with Nintendo Switch, Windows, Android, and Apple devices. Includes features, setup, and safety information.
Preview 8BitDo M30 Bluetooth Gamepad: Instruction Manual and Connectivity Guide
Comprehensive guide to setting up and using the 8BitDo M30 Bluetooth Gamepad, covering connection to Switch, Android, Windows, and macOS, turbo function, battery, and safety information.
Preview 8BitDo Pro 2 Wired Gamepad: Instruction Manual
User guide for the 8BitDo Pro 2 Wired Gamepad, detailing setup for Nintendo Switch, Windows, and Android, along with features like Turbo function and Ultimate Software customization.
Preview 8BitDo Zero 2 Bluetooth Gamepad: User Manual and Connectivity Guide
Comprehensive guide for the 8BitDo Zero 2 Bluetooth gamepad, covering setup, pairing, connectivity for Switch, Windows, Android, macOS, and keyboard mode, along with battery information and power saving features.
Preview 8BitDo N30 Pro 2 Bluetooth Gamepad Instruction Manual
User guide for the 8BitDo N30 Pro 2 Bluetooth gamepad, detailing setup for Switch, Android, Windows, and macOS, including connection steps, turbo function, battery information, and power saving features.