8BitDo M30 Bluetooth Gamepad

Product Overview

The 8BitDo M30 Bluetooth Gamepad offers a classic design inspired by retro controllers, enhanced with modern Bluetooth connectivity. It is compatible with a wide range of devices including Nintendo Switch, Android, Windows, and macOS.

Gamepad Layout: The controller features a directional pad (d-pad), six primary face buttons (A, B, X, Y, Z, C), two shoulder buttons (L, R), a central 'home' button, a 'star' button for special functions, and a 'pair +start' button for power and pairing operations. It also includes two analog sticks.

Power On/Off

• To turn on the controller, press the start button.
• To turn off the controller, press and hold the start button for 3 seconds.
• To force turn off the controller, press and hold the start button for 8 seconds.

Connecting to Devices

Nintendo Switch

1. Turn on the controller by pressing and holding Y + start. The LEDs will rotate.
2. Press and hold the pair button for 2 seconds to enter pairing mode. The LEDs will pause briefly and then resume rotating.
3. On your Switch, navigate to Controllers > Change Grip/Order. The LEDs will become solid when the connection is successful.
4. Once paired, pressing the start button will automatically reconnect the controller.

Note: On Switch, the 'star' button functions as the Screenshot button, and the 'home' button functions as the HOME button.

Android (D-input)

1. Turn on the controller by pressing and holding B + start. LED 1 will blink.
2. Press and hold the pair button for 2 seconds to enter pairing mode. LED 1 will pause briefly and then resume rotating.
3. On your Android device, go to Bluetooth settings, search for and pair with "8BitDo M30 gamepad". The LED will become solid upon successful connection.
4. Once paired, pressing the start button will automatically reconnect the controller.

USB Connection: Connect the controller to your Android device via USB cable after completing step 1.

Windows (X-input)

1. Turn on the controller by pressing and holding X + start. LEDs 1 & 2 will blink.
2. Press and hold the pair button for 2 seconds to enter pairing mode. The LEDs will pause briefly and then resume rotating.
3. On your Windows device, go to Bluetooth settings, search for and pair with "8BitDo M30 gamepad". The LEDs will become solid upon successful connection.
4. Once paired, pressing the start button will automatically reconnect the controller.

USB Connection: Connect the controller to your Windows device via USB cable after completing step 1.

macOS

1. Turn on the controller by pressing and holding A + start. LEDs 1, 2 & 3 will blink.
2. Press and hold the pair button for 2 seconds to enter pairing mode. The LEDs will pause briefly and then resume rotating.
3. On your macOS device, go to Bluetooth settings, search for and pair with "Wireless Controller". The LEDs will become solid upon successful connection.
4. Once paired, pressing the start button will automatically reconnect the controller.

USB Connection: Connect the controller to your macOS device via USB cable after completing step 1.

Turbo Functionality

To activate or deactivate turbo functionality for a button, press and hold the desired button, then press the star button. Note that the d-pad and analog sticks do not support turbo functionality. This feature is not available when connected to a Nintendo Switch.

Battery Information

• Status Indicators:
• Low Battery: Red LED blinks.
• Charging: Red LED stays solid.
• Charging Complete: Red LED turns off.

• The controller features a built-in 480mAh Li-on battery, providing approximately 18 hours of playtime.
• Rechargeable via USB-C cable with a charging time of 1-2 hours.

Safety Warnings

• Always use batteries, chargers, and accessories provided by the manufacturer.
• The manufacturer is not liable for any safety issues arising from the use of non-manufacturer-approved accessories.
• Do not attempt to disassemble, modify, or repair the device yourself.
• Avoid crushing, disassembling, puncturing, or attempting to modify the device or its battery, as these actions can be dangerous.
• Any unauthorized changes or modifications to the device will void the manufacturer's warranty.

Power Saving

• The controller enters sleep mode after 1 minute of no Bluetooth connection.
• It enters sleep mode after 15 minutes of inactivity while connected via Bluetooth.
• Press the start button to wake up the controller.
• The controller remains powered on and connected when using a wired USB connection.

Support and Firmware Updates

For further information, additional support, and firmware updates, please visit support.8bitdo.com.