Channel nut FCN Clix M
Channel nut for quick and easy fixing in FUS profiles
Product Overview
The fischer FCN Clix M is a channel nut designed for quick and secure fixing within FUS profiles. It simplifies the connection of pipe clamps using threaded rods, offering efficient installation and reliable performance in various building services applications.
Image Description: A fischer FCN Clix M channel nut is shown assembled with a threaded rod and a pipe clamp attached to a FUS profile channel. A separate image depicts a close-up view of the channel nut fitted inside a FUS profile channel.
Applications
- Connection of pipe clamps to FUS channel under the use of threaded rods.
- Suitable for dry interior areas.
- Suitable for indoor and outdoor applications and environments with high stress to components due to corrosion (specifically for the FCN Clix M A4 variant).
Advantages
- The sliding nut design enables a quick and easy setting in the channel.
- Serrations on the sliding nut provide a secure hold within the FUS channel.
- Installation by rotating 90° enables post-installation into an already installed channel.
Properties
- Material: Steel S235JR (material no. 1.0037) according to DIN EN 10025 for standard and 'hdg' variants.
- Material: Stainless steel A4 (material no. 1.4401) for the FCN Clix M A4 variant.
- Material Plastic: Nylon PA6.
- Zinc Plating: Electro zinc-plated for standard variants; Hot-dip galvanised for 'hdg' variants.
Certificates
- R 120 (Fire resistance rating)
- R 30 MLAR (Fire resistance rating)
Installation FCN Clix M
The installation process is designed for ease and speed:
- Insert the channel nut into the FUS profile channel.
- Position the nut by rotating it 90 degrees to engage the profile's internal structure.
- Place the component to be fixed onto the threaded rod.
- Insert the threaded rod into the channel nut.
- Tighten the threaded rod to secure the component in place.
Technical Data
| Item | Item no. | Fire test report | Thread | Dimension A [mm] | Dimension S [mm] | Sales unit [pcs] |
|---|---|---|---|---|---|---|
| FCN Clix M 6 | 559761 | No | M6 | 40 | 6.0 | 50 |
| FCN Clix M 8 | 559762 | No | M8 | 40 | 6.0 | 50 |
| FCN Clix M 10 | 559763 | Yes | M10 | 40 | 8.0 | 50 |
| FCN Clix M 12 | 559764 | Yes | M12 | 35 | 9.5 | 50 |
| FCN Clix M 8 hdg | 559768 | No | M8 | 40 | 6.0 | 50 |
| FCN Clix M 10 hdg | 559769 | Yes | M10 | 40 | 8.0 | 50 |
| FCN Clix M 12 hdg | 559770 | Yes | M12 | 35 | 9.5 | 50 |
| FCN Clix M 8 A4 | 559752 | No | M8 | 40 | 6.0 | 25 |
| FCN Clix M 10 A4 | 559753 | Yes | M10 | 40 | 8.0 | 25 |
| FCN Clix M 12 A4 | 562663 | Yes | M12 | 35 | 9.5 | 25 |
Loads
| Item | Item no. | Max. recommended tension load for FUS 1.5 mm [kN] | Max. recommended tension load for FUS 2.0 mm [kN] | Max. recommended tension load for FUS 2.5 mm [kN] | Tightening torque for screw grade ≥ 4.6 [Nm] | Sales unit [pcs] |
|---|---|---|---|---|---|---|
| FCN Clix M 6 | 559761 | 2.5 | 3.0 | 3.0 | 5 | 50 |
| FCN Clix M 8 | 559762 | 3.0 | 4.0 | 4.0 | 10 | 50 |
| FCN Clix M 10 | 559763 | 4.0 | 5.0 | 8.0 | 15 | 50 |
| FCN Clix M 12 | 559764 | 4.0 | 5.0 | 8.0 | 20 | 50 |
| FCN Clix M 8 hdg | 559768 | 4.0 | 4.0 | - | 10 | 50 |
| FCN Clix M 10 hdg | 559769 | 5.0 | 8.0 | - | 15 | 50 |
| FCN Clix M 12 hdg | 559770 | 5.0 | 8.0 | - | 20 | 50 |
| FCN Clix M 8 A4 | 559752 | 4.0 | 4.0 | - | 10 | 25 |
| FCN Clix M 10 A4 | 559753 | 5.0 | 8.0 | - | 15 | 25 |
| FCN Clix M 12 A4 | 562663 | 5.0 | 8.0 | - | 20 | 25 |
Note: '-' indicates data not provided for this specific variant in the source document for the respective load capacity.
