Product Highlights
- Power Your Devices: Supports IEEE 802.3af/at PoE to power PoE-capable network devices via Ethernet cables without the need for power adapters.
- Flexible Connectivity: Supports transmission distance up to 250m for flexible installation of wireless AP & Surveillance Solutions.
- Eco-friendly and Economical: Low-cost, innovative design runs reliably and quietly, saving energy and cutting costs without sacrificing performance.
Product Overview
The D-Link DGS-F1210-18PS-E is an 18-port Managed Gigabit Switch featuring 16 10/100/1000 Mbps PoE ports and 2 Gigabit SFP uplink ports. This switch enables users to easily connect and supply power to PoE-capable devices such as wireless Access Points (APs) and IP cameras.
Image Description: The product is a rack-mountable network switch with a dark grey chassis. The front panel displays multiple RJ45 Ethernet ports, two SFP uplink ports, and various LED indicators for status monitoring.
Features
Superior Connectivity
- 16 x 10/100/1000 Mbps PoE ports
- 2 x Gigabit SFP Ports
- 150 watts available for PoE
- Flow control for protection against data loss
- Maximum transmission distance of 250m
Standards
- IEEE 802.3 10BASE-T Ethernet (twist-pair copper)
- IEEE 802.3u 100BASE-TX Fast Ethernet (twisted pair copper)
- IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted pair copper)
- IEEE 802.3z 1000 BASE-X (fiber-optic)
- IEEE 802.3af Power over Ethernet
- IEEE 802.3at Power over Ethernet
Easy to Use
- Plug-and-play installation
- IEEE 802.3x Flow Control
- Auto MDI/MDIX crossover for all ports
Power Over Ethernet
The DGS-F1210-18PS-E supports both IEEE 802.3at and IEEE 802.3af PoE protocols. With a total PoE budget of 150 watts, it allows users to connect IEEE 802.3af-compliant devices without requiring additional power. PoE is particularly suitable for devices located far from power outlets or when users wish to minimize cable clutter, as power is supplied via the Ethernet cables.
Technical Specifications
General
| Network Interface | 16 x 10/100/1000 Mbps PoE RJ45 ports (port1~port16), 2 x Gigabit SFP Ports |
|---|---|
| Console Port | RJ45 |
| DIP Switches | VLAN, Extend, PoE, QoS |
| Transmission Rate | 10/100/1000 Mbps. Each port supports MDI/MDIX auto-flip and auto-negotiation. Network interface: 10BASE-T or 100BASE-TX, 1000BASE-T Ethernet RJ-45 port. |
| Protocols and Standards |
|
Functionality
| Switching Capacity | 36 Gbps |
|---|---|
| Packet Forwarding | 23.8 Mpps |
| LED's Indicator | Power, SYS, LINK/ACT, PoE |
| Budget | 150W |
| MAC Address Table | 8K Entries |
| Power | 100-240VAC, 50-60Hz |
| Lightning protection | 6KV |
Physical
| Physical Characteristics | Dimensions (LxWxH): 440 x 180 x 44mm. Weight: 2.3kg. |
|---|---|
| Environmental Parameter | Operating Temperature: 0 to 40 °C (32 to 104 °F). Operating Humidity: 10% to 90% non-condensing. |
Software Specifications
Protocol Standard
| IEEE 802.3: Ethernet Media Access Control (MAC) Protocol |
| IEEE 802.3i: 10BASE-T Ethernet |
| IEEE 802.3u: 100BASE-TX Fast Ethernet |
| IEEE 802.3ab: 1000BASE-T Gigabit Ethernet |
| IEEE 802.3z: 1000BASE-X Gigabit Ethernet (fiber) |
| IEEE 802.3ad: Standard method for performing link aggregation |
| IEEE 802.3x: flow control |
| IEEE 802.1p: LAN Layer 2 QoS/CoS protocol for traffic priority (multicast filtering) |
| IEEE 802.1q: VLAN |
| IEEE 802.1d: STP Spanning tree |
| IEEE 802.1s: MSTP Spanning tree |
| IEEE 802.1w: RSTP Spanning tree |
| IEEE 802.3af |
| IEEE 802.3at |
DHCP
| DHCP Snooping |
VLAN
| 4K VLAN |
| 802.1Q VLAN, MAC VLAN, IP VLAN |
| Voice VLAN |
MAC address table
| Comply the IEEE 802.1d standard |
| MAC address learning and aging automatically |
| Static, dynamic |
Security
| Password protection |
| Based on the port number, IP address, MAC address restrictions on user access |
| HTTPS, SSL V3, TLS V1, SSH V1/V2 |
| IP-MAC-PORT ternary binding |
| IP source protection, DoS protection |
| DHCP Snooping, DHCP attack protection |
| 802.1X, AAA |
| Port isolation |
| CPU protection |
PoE management
| PoE power limit |
| PoE chip status view |
| PoE port priority |
| PoE power supply time period |
Access control (ACL)
| L2 (Layer 2) ~ L4 (Layer 4) packet filtering |
| Port mirroring, port redirection, flow rate limiting, QoS re-marking |
Quality of Service (QoS)
| 8 port queue |
| Port priority, 802.1p priority, DSCP priority |
| SP, WRR, WFQ Priority scheduling algorithm |
Spanning Tree
| STP(IEEE 802.1d), RSTP(IEEE 802.1w) and MSTP(IEEE 802.1s) protocol |
| Root bridge protection, TC protection, BPDU protection |
Multicast
| IGMP v1/v2 Snooping |
| Fast leave mechanism |
| Packet statistics, and unknown multicast discards. |
Storm suppression
| Multicast suppression |
| Broadcast suppression |
| Unknown unicast suppression |
Link aggregation
| Static aggregation |
| Dynamic aggregation |
| IP, MAC, and hybrid load balancing modes |
| Up to 32 aggregation groups |
IPv6
| IPv6 Ping, IPv6 Tracert, IPv6 Telnet |
| IPv6 SSH, IPv6 SSL |
Management and maintenance
| WEB network management (HTTP, HTTPS, SSL V3) |
| CLI (Telnet, SSH V1/V2, local serial port) |
| SNMP V1/V2/V3 |
| LLDP, RMON |
| IP source protection, DoS protection |
| CPU monitoring, memory monitoring |
| System log, grading warning |
| Ping, Tracert detection, cable detection |
Order Information
| Part Number | Description |
|---|---|
| DGS-F1210-18PS-E | 18-Port Layer 2 Gigabit Managed Long Range PoE+ Surveillance Switch with 2 SFP Ports |
Switch Working Mode
- Extend Mode: Ports 1-8 support 250 meters long distance power supply (requires Cat5e or Cat6 cable).
- VLAN Mode: Isolating ports 1-16 from each other effectively suppresses network storms and improves network performance.
- QoS Mode: Customize application priority to improve network sensitivity. For example, prioritizing video or monitoring transmission for smoother performance.
- PoE Mode: Automatically detects power-receiving ports, identifies dead devices, and powers them off and restarts them.
