Jenn-Air 72" Counter-Depth French Door Refrigerator with Internal Dispenser
Detailed Planning Dimensions Guide
Model: JFFCF72DKL – 35 5/8" (W) x 71 7/8" (H) x 30 1/2" (depth with handles)
Product Dimensions
| DIMENSION | DESCRIPTION | JFFCF72DKL |
|---|---|---|
| A | Width of each door | 17 5/8" (44.8 cm) |
| B | Space between doors | 3/8" (9 mm) |
| C | Overall width | 35 5/8" (90.5 cm) |
| D | Height of door handles (RISETM) | 32 3/4" (83.2 cm) |
| E | Height to top of door handles (RISETM) | 38" (96.5 cm) |
| F | Height of doors | 44 1/8" (112.1 cm) |
| G | Space between doors and drawer | 1" (2.5 cm) |
| H | Depth with doors open 90° | 44" (111.8 cm) |
| I | Height of drawer | 23 7/8" (60.6 cm) |
| J | Height of grille | 2 7/8" (7.3 cm) |
| K | Width from side of refrigerator to handle-door fully open 125° (RISETM) | 11" (28 cm) |
| L | Width from side of refrigerator to handle-door open 90° (RISETM) | 3 3/8" (8.6 cm) |
Diagram Description (Front View): Illustrates the refrigerator's front profile, showing the width of each door (A), the gap between doors (B), the total external width (C), and the height of the door handles (D, E). It also indicates the height of the grille (J).
Diagram Description (Top View): Depicts the refrigerator from above, highlighting the overall width (C) and showing the required clearance space (K, L) for the doors to open to 125° and 90° from the side of the refrigerator.
Product Dimensions (Continued)
| DIMENSION | DESCRIPTION | JFFCF72DKL |
|---|---|---|
| A* | Height to top of drawer (min.) | 26 3/4" (67.9 cm) |
| B* | Height to top of drawer handle (min.) | 25 3/4" (65.4 cm) |
| C* | Height of recessed refrigerator (min.) | 71 1/4" (181 cm) |
| D* | Height to top of hinges (min.) | 71 7/8" (182.6 cm) |
| E | Depth with drawer fully open including drawer handle (min.) | 44 5/16" (112.5 cm) |
| F | Depth with handles (min.) | 30 1/2" (77.5 cm) |
| G | Depth with doors (min.) | 27 5/8" (70.2 cm) |
| H | Depth without doors (min.) | 24 1/2" (62.2 cm) |
| I | Depth to back of hinges (min.) | 20 5/8" (52.4 cm) |
*Add 3/4" (1.9 cm) to the height dimension when leveling legs are fully extended.
Diagram Description (Side View): Shows a profile view of the refrigerator, detailing the height to the top of the drawer (A*), the height to the drawer handle (B*), the overall recessed height (C*), and the height to the top of the hinges (D*). It also indicates various depth measurements: with the drawer fully open (E), with handles (F), with doors closed (G), without doors (H), and the depth to the back of the hinges (I).
Opening Clearance Dimensions
| DIMENSION | DESCRIPTION | JFFCF72DKL |
|---|---|---|
| A | Width (min.) | 36 5/8" (93 cm) |
| B | Minimum width from side of refrigerator to fixed wall – door open 90° | 3 3/8" (8.6 cm) |
| Minimum width from side of refrigerator to fixed wall – door open approx. 125° | 11" (28 cm) | |
| C | Width of recommended electrical/water installation area | 34" (86.4 cm) |
| D | Height (min.) | 71 7/8" (182.6 cm) |
| E | Height of recommended electrical installation area | 10" (25.4 cm) Min. / 24" (61cm) Max. |
| F | Height of recommended water installation area | 10" (25.4 cm) |
| G | Depth of recommended water installation area | 1" (2.5 cm) |
| H | Water line location – distance from side | 24 5/8" (62.5 cm) |
| I | Water line location – distance from bottom | 9 3/8" (23.8 cm) |
| e | Recommended electrical connection location | |
| w | Recommended water connection location |
Diagram Description (Front View): Shows the required opening space for the refrigerator. It indicates the minimum opening width (A), clearance needed from the side wall for door swing at 90° (B) and 125° (also B), the width allocated for electrical and water connections (C), and the minimum overall height of the opening (D). It also specifies the height ranges for electrical (E) and water (F) installation areas, and the depth for the water installation area (G). The positions for the water line (H, I) and connection points (e, w) are also indicated.
Diagram Description (Back View): Provides a view of the rear of the refrigerator, typically showing connection points for utilities.
Electrical and Location Requirements
Electrical Requirements
WARNING: Electrical Shock Hazard
- Plug into a grounded 3 prong outlet.
- Do not remove ground prong.
- Do not use an adapter.
- Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
A 115 V, 60 Hz, AC only 15 A or 20 A fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator and approved accessories be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.
Water Pressure Requirements
A cold water supply with water pressure of between 35 psi and 120 psi (241kPa and 827 kPa) is required to operate the water dispenser and ice maker. If you have questions about your water pressure, call a licensed, qualified plumber.
IMPORTANT: The pressure of the water coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 35 psi and 120 psi (241kPa and 827 kPa). If a reverse osmosis water filtration system is connected to the cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 psi to 60 psi (276 kPa to 414 kPa).
Location Requirements
WARNING: Explosion Hazard
Keep flammable materials and vapors, such as gasoline, away from refrigerator.
Failure to do so can result in death, explosion, or fire.
To ensure proper ventilation for your refrigerator, allow for 1/2" (1.25 cm) of space on each side and at the top. Allow for 1" (2.54 cm) of space behind the refrigerator.
Because Whirlpool Corporation policy includes a continuous commitment to improve its products, Jenn-Air reserves the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product. Specifications subject to change without notice.
