YITAHOME
Model: HNFKS-V1
Product Code: FTPLPB-0197
Product Name: Patio Sofa (also known as Terrassensofa, Canapé de Patio, Divano da Esterno, Sofá de Patio)
Assembly Instructions
Important Pre-Assembly Notes:
- Confirm all parts are present prior to assembly.
- Assemble on a flat, clean, and soft surface.
- Do not fully tighten screws until all parts are assembled.
Parts List
| Item No. | Reference Image Description | Quantity |
|---|---|---|
| A | Left Side Frame Assembly | X1 |
| B | Right Side Frame Assembly | X1 |
| C | Backrest Frame | X1 |
| D | Slatted Seat Panel | X1 |
| E | Seat Cushions | X2 |
| F | Backrest Cushion | X1 |
| G | M6x35mm Screws | X7 |
| H | M6x65mm Screws | X2 |
| I | Washers Φ14xΦ6.5x1mm | X9 |
| J | Allen Wrench | X1 |
| K | Foot Pads | X4 |
Assembly Steps
Step 1
Parts Used: A (1 pc), D (1 pc), G (2 pcs), I (2 pcs)
Attach the left side frame (A) to one end of the slatted seat panel (D) using two M6x35mm screws (G) and two washers (I).
Step 2
Parts Used: B (1 pc), G (2 pcs), I (2 pcs), D (1 pc), A (1 pc)
Attach the right side frame (B) to the other end of the slatted seat panel (D) using two M6x35mm screws (G) and two washers (I). Then, attach the left side frame (A) to the other side of the seat panel (D) using two screws (G) and two washers (I).
Note: The diagram implies the seat panel (D) is connected to both side frames (A and B).
Step 3
Parts Used: K (4 pcs), A (1 pc), B (1 pc)
Attach the four foot pads (K) to the bottom of the left side frame (A) and the right side frame (B).
Step 4
Parts Used: C (1 pc), G (2 pcs), I (2 pcs), A (1 pc), B (1 pc), D (1 pc)
Attach the backrest frame (C) to the top of the left side frame (A) and the right side frame (B) using two M6x35mm screws (G) and two washers (I).
Step 5
Parts Used: H (2 pcs), I (2 pcs), C (1 pc), A (1 pc), B (1 pc)
Secure the backrest frame (C) to the side frames (A and B) using two M6x65mm screws (H) and two washers (I). The entire unit is then rotated 180 degrees [rotation symbol].
Step 6
Parts Used: E (2 pcs), F (1 pc), D (1 pc), C (1 pc)
Place the two seat cushions (E) onto the slatted seat panel (D) and the backrest cushion (F) onto the backrest frame (C).
Step 7
Description:
Installation Completed.
Installation Abgeschlossen.
Installation Complétée.
Installazione Completata.
Instalación Completada.
Contact Information
For any questions regarding the installation of YITAHOME products, please email after-sale.cs@hotmail.com.
Alternative Contact Method (for amazon.co.uk orders only):
- Log into your Amazon account.
- Navigate to "Your Orders" and locate the purchase.
- Click on "Contact Seller".
