Yaheetech CUPBOARD (Model # 610666) Assembly Instructions

Introduction

Thank you for purchasing a Yaheetech product. Please read this instruction manual carefully after receiving this product. It will help you assemble this product quickly, safely, and correctly. You can keep this manual for future reference.

Usage and Safety Instructions

Please read the following instructions carefully and use the product in accordance with the manual.
Keep the instruction manual. Please give the product along with the Installation and Operating Instructions if it is for other people to use.
The warnings, cautions, and instructions listed in this manual may not cover all possible situations that may arise when using the product. Please contact Yaheetech via e-mail info@yahee.com.cn if you need further information or help.
This product is not a climbing frame for children's play, which could result in injury. Please do not leave children unattended.
Check the item for possible damages before use. Do not use it if it is bent, cracked, or damaged.
Improper loading can cause a tilt of the item.
The normal functioning of the product can be guaranteed when it is in a vertical and horizontal position. Please always position the product on a level surface.
Do not place the product near the fire or heat sources! Caution: Fire Hazard.
Be careful of your hands when setting up! Yaheetech recommends wearing protective gloves for assembly.
Do not use corrosive cleaners for cleaning!

Parts and Hardware List

Item	Description	Quantity
①	Panel	x1
②	Panel	x1
③	Panel	x1
④	Panel	x1
⑤	Panel	x1
⑥	Panel	x1
⑦	Panel	x1
⑧	Panel	x1
⑨	Shelf	x2
⑩	Door	x2
A	Screw	x8
B	Screw	x8
C	Screw	x16
D	Cam Lock	x4
E	Cam Bolt	x4
F	Cam Lock	x8
G	Cam Bolt	x4
H	Screw	x24
I	Screw	x2
J	Dowel	x2
K	Wheel	x2
L	Wheel	x2

Assembly Steps

Step 1: Assemble Base and First Side Panel

Parts Used: ①, ⑥, K (x2), L (x2)

Description: Attach panel ⑥ to panel ①. Insert two wheels (K) into the designated holes on the underside of panel ①. Insert two wheels (L) into the designated holes on the underside of panel ⑥. Secure panel ⑥ to panel ① using screws (not explicitly shown in diagram for this step, but implied by the overall structure and part counts).

Visual Aid: Panel ① forms the base. Panel ⑥ is a side panel. Screws are used to connect them. Wheels are attached to the bottom of both panels.

Step 2: Attach Second and Third Side Panels

Parts Used: ②, ③, ⑥, D (x4), E (x4)

Description: Screw four cam bolts (E) into the pre-drilled holes on panels ② and ③. Insert four cam locks (D) into the corresponding holes on panel ⑥. Align panels ② and ③ with panel ⑥ and tighten the cam locks (D) to secure them.

Visual Aid: Panels ② and ③ are attached to panel ⑥, forming the sides of the cupboard structure. Cam bolts and cam locks are used for connection.

Step 3: Attach Fourth Side Panel

Parts Used: ⑥, ⑧, C (x4)

Description: Attach panel ⑧ to panel ⑥ using four screws (C). These screws pass through panel ⑥ into the edge of panel ⑧.

Visual Aid: Panel ⑧ is attached to the existing structure, likely forming another side or support.

Step 4: Install Shelves

Parts Used: ⑤, ④, B (x8), and cam locks (implied)

Description: Screw eight cam bolts (B) into the side panels. Insert cam locks into panels ⑤ and ④ (shelves). Align the shelves with the cam bolts and tighten the cam locks to secure the shelves in place.

Visual Aid: Panels ⑤ and ④ are installed as shelves within the cupboard structure. Cam bolts and cam locks are used for attachment.

Step 5: Attach Back Panel

Parts Used: ④, C (x8)

Description: Attach the back panel (④) to the assembled structure using eight screws (C). The screws go through the edges of the side panels and shelves into the back panel.

Visual Aid: Panel ④ is affixed to the rear of the cupboard, enclosing the structure.

Step 6: Attach Top Panel

Parts Used: ⑦, A (x4), and cam locks (implied)

Description: Screw four cam bolts (A) into the top edges of the side panels. Insert cam locks into panel ⑦ (the top panel). Align the top panel with the cam bolts and tighten the cam locks to secure it.

Visual Aid: Panel ⑦ is placed on top of the cupboard structure and secured.

Step 7: Attach Doors

Parts Used: ⑨ (x2), F (x8), B (x8)

Description: Attach two hinges (F) to each door (⑨) using screws (B). Then, attach the doors to the front of the cupboard body using the hinges and screws (B).

Visual Aid: Two doors are mounted onto the front of the cupboard using hinges.

Step 8: Attach Handles

Parts Used: ⑩ (x2), G (x4), H (x24)

Description: Attach handles (G) to the doors (⑩) using screws (H). Typically, two screws per handle.

Visual Aid: Handles are affixed to the exterior of the doors.

Step 9: Final Check

Description: The assembly is complete. Ensure all screws and cam locks are tightened and the cupboard is stable.

Visual Aid: A complete view of the assembled cupboard with doors and handles.

Support and Further Information

You can find a downloadable user manual at: www.yaheeshop.com/pdf/en-1-6010619.pdf

If you have any questions or need further assistance, please contact Yaheetech customer support.

	Yaheetech 613761 Storage Cabinet Assembly Instructions Comprehensive assembly instructions for the Yaheetech 613761 storage cabinet, detailing parts, step-by-step assembly, and wall anchoring guidance.
	Yaheetech 613812 Storage Cabinet Assembly Instructions Comprehensive guide for assembling the Yaheetech 613812 storage cabinet. Includes a detailed parts list, step-by-step assembly instructions, and essential wall anchoring safety information.
	Yaheetech Storage Unit Assembly Instructions (Model #591880) Comprehensive assembly instructions for the Yaheetech Model #591880 storage unit. This guide provides a detailed parts list, step-by-step assembly procedures, safety warnings, and contact information for assistance.
	Yaheetech 613680 Assembly Instructions Detailed assembly instructions for the Yaheetech 613680 storage cabinet, including parts list, assembly steps, and safety information in multiple languages.
	Yaheetech 612501 Assembly Instructions: Wooden Storage Cabinet Step-by-step assembly instructions for the Yaheetech 612501 wooden storage cabinet. Includes parts list, hardware details, assembly steps, and wall anchoring guide for home organization.
	Yaheetech 611793 Mobile File Cabinet Assembly Instructions Comprehensive assembly instructions for the Yaheetech 611793 mobile file cabinet, including parts list, step-by-step guidance, and safety precautions. Supports multiple languages.
	Yaheetech 611794 Mobile Cabinet Assembly Instructions Detailed, step-by-step instructions for assembling the Yaheetech 611794 mobile cabinet with drawers. Includes parts list, hardware guide, safety information, and contact details.
	Yaheetech 613729 Assembly Instructions This document provides assembly instructions for the Yaheetech 613729 product. It includes a list of parts, hardware, and step-by-step visual guides for assembly in multiple languages.