Yaheetech 613680 Storage Cabinet Assembly Instructions

Important Information

We recommend 2 or more people to install this product.

The expected assembly time is approximately 1 hour.

This product is not intended for use by children.

Keep away from fire or other heat sources.

We recommend wearing protective gloves during assembly.

Please follow the instruction manuals and use a pad to avoid damage during assembly.

Parts List

The following parts are included in the package:

1. Top Panel (x1)
2. Bottom Panel (x1)
3. Left Side Panel (x1)
4. Right Side Panel (x1)
5. Middle Shelf (x1)
6. Back Panel (x2)
7. Drawer Side Panel (x2)
8. Drawer Bottom Panel (x1)
9. Drawer Front Panel (x1)
10. Drawer Slide Rail (x1)
11. Drawer Slide Rail (x1)
12. Back Support Panel (x2)
13. Drawer Side Panel (x4)
14. Drawer Front Connector (x4)
15. Drawer Front Connector (x4)
16. Drawer Base Support (x4)
17. Drawer Back Panel (x4)
18. Knob (x1)

Hardware:

1. Screw (B) (x1)
2. Screw (C) (x2)
3. Screw (D) (x6)
4. Screw (E) (x4)
5. Screw (F) (x6)
6. Screw (G) (x1)
7. Allen Wrench (H) (x1)
8. Screw (I) (x4)
9. Adjustable Foot (J) (x1)
10. Connector Plate (K) (x1)
11. Screw (L) (x12)
12. Screw (M) (x16)
13. Cam Lock (N) (x26)
14. Cam Bolt (O) (x26)
15. Screw (P) (x16)
16. Dowel (Q) (x12)
17. Handle (R) (x8)
18. Dowel (S) (x2)
19. Screw (T) (x8)
20. Screw (U) (x8)
21. Screw (V) (x1)
22. Screw (W) (x8)

Assembly Steps

1. Step 1: Attach parts (14) and (15) to part (16) using screws (P). Ensure to only half-tighten screws initially.
2. Step 2: Insert part (17) into the assembled section from Step 1.
3. Step 3: Attach part (13) to the structure using screws (Q).
4. Step 4: Connect part (13) to part (15) and (14) using cam locks (N).
5. Step 5: Attach part (1) to the side panels (3) and (4) using screws (L) and connector plate (J).
6. Step 6: Attach part (3) to the bottom panel (2) and side panels (6) using screws (M) and dowels (T).
7. Step 7: Attach part (5) to the side panels (6) using screws (M) and dowels (T).
8. Step 8: Attach part (8) to the side panel (5) using cam bolts (O) and cam locks (N).
9. Step 9: Connect the main structure using parts (2), (3), (4), and (5) with screws (F) and (Q).
10. Step 10: Attach drawer slide rails (10) and (11) to the side panels (3) and (5) using screws (C) and (D).
11. Step 11: Insert back support panels (12) into the grooves of the side panels.
12. Step 12: Attach the top panel (1) to the main structure using screws (N) and (Q).
13. Step 13: Attach the side panels (6) to the main structure using screws (D), (E), and (I). Also attach handles (R) using screws (S).
14. Step 14: Insert adjustable shelves (7) using handles (R).
15. Step 15: Assemble the drawer by attaching part (9) to the drawer side panels (13) using screws (K), (L), (S), and knob (A) with screw (B).
16. Step 16: Slide the assembled drawer into the cabinet.
17. Step 17: Insert the door panel (9) into the cabinet.
18. Step 18: Secure the door using screws (W).
19. Step 19: Attach the door hinges using screws (L), (U), and (V).
20. Step 20: Screw in the adjustable feet (J) to keep the cabinet balanced.
21. Step 21: Wall Anchoring Guide: Follow the instructions for securing the cabinet to the wall based on your wall material (drywall with stud, drywall without stud, masonry).
22. Step 22: Final check of all connections.

Wall Anchoring

To prevent tipping, it is essential to anchor this furniture to the wall using the provided anti-tip kit. Please follow the instructions below based on your wall type:

Drywall or plaster with available wood stud:

Mark the attachment point(s) with a pencil at the appropriate height and positioned over wood stud(s). Drill a pilot hole(s) with a diameter that matches the screw into the wood stud(s), at the height you marked with pencil. Secure the screw to the wood firmly as the picture shows.

Drywall without available wood stud:

Mark the attachment point(s) with a pencil at the appropriate height. Drill a hole(s) with a diameter that matches the plastic anchor through the wall at the height you marked with pencil. Drive the plastic plug(s) into the hole(s), using a hammer if needed. Insert the screw into the plastic plug firmly as the picture shows. Do not over-tighten.

Masonry:

Mark the attachment point(s) with a pencil at the appropriate height. Drill a hole(s) with a diameter and depth that match the plastic anchor through the wall at the height you marked with pencil. Drive the plastic plug(s) into the hole(s), using a hammer if needed. Insert the screw into the plastic plug firmly as the picture shows. Do not over-tighten.

If the screw can't be secured to the wall, please keep the product away from children.

If your wall material is not listed here, or if you have any questions, consult your local hardware store.

Customer Support

If you are not entirely satisfied with your purchase, please feel free to contact Yaheetech using the following steps:

1. Go to Your Orders.
2. Find your order in the list.
3. Select Problem with order.
4. Choose your topic from the list displayed.
5. Select Contact seller.

You can also download the electronic Installation Manual from the Product guides and documents section of the advertising page.