Finney Upholstered Queen Bed

1. Screw Legs into Headboard

Screw 2 of the legs (D) into the headboard (A).

Diagram shows the headboard (A) with two bed legs (D) being screwed into the bottom corners. Arrows indicate the direction of rotation for attachment.

2. Screw Legs into Footboard

Screw 2 of the legs (D) into the footboard (B).

Diagram shows the footboard (B) with two bed legs (D) being screwed into the bottom corners. Arrows indicate the direction of rotation for attachment.

3. Attach Sideboards

Attach the 2 sideboards (C) to the headboard (A) and footboard (B) by sliding the metal plates onto the bolts as shown. The 2 metal pieces should align.

Diagram shows sideboards (C) connecting the headboard (A) and footboard (B). Close-up views illustrate the metal plates on the sideboards aligning with bolts on the headboard and footboard.

4. Install Support Legs and Slats

Screw the support legs (G) into the cross slats (F). Place them in the center of the bed. Place the slats (E) on top of the support legs and inside of the bed.

Diagram shows support legs (G) being screwed into the cross slats (F). Subsequently, the main slats (E) are shown being placed on top of the support legs and within the bed frame.

5. Secure Slats

Attach the slats to the bed by using the wrench (HW2) to screw in the 9 screws (HW1) in the spots shown.

Diagram shows the bed frame with slats in place. A close-up view illustrates a wrench (HW2) being used to tighten screws (HW1) into the designated attachment points.

6. Final Placement

Place the bed in the place where you will use it. We'd love to see it – just tag us and use the hashtag #safavieh on Instagram!