Retekess TR107 AM/FM 2 Band Radio

Function Parts

The TR107 radio features the following parts:

• 1. Volume control: Used to adjust the sound volume.
• 2. AM/FM Dial scale: Displays the frequency for AM and FM bands.
• 3. Dial pointer: Indicates the selected frequency on the dial scale.
• 4. Tuning knob: Used to search for desired radio stations.
• 5. Band switch: Selects between AM, FM, and FM Stereo bands.
• 6. Power on/off & BBS on: Controls the power and activates the Bass Boost System (BBS) for enhanced bass sound.
• 7. Earphone jack: A 3.5mm jack for connecting headphones or earphones.
• 8. Battery compartment: Located at the back, holds 2 AAA batteries.

Diagram Description: A visual representation shows the front and top of the TR107 radio with numbered callouts pointing to each function part. The front panel displays the dial scale with AM/FM frequencies, tuning knob, band switch, and power/BBS switch. The top has the volume control and earphone jack. The back shows the battery compartment cover.

Reception Operation

1. Power Control: Move the power switch (6) to the 'ON' position to turn the radio on and to 'OFF' to turn it off.
2. Earphone Connection: Plug your earphones into the earphone jack (7).
3. Band Selection and Tuning:
   • Move the band switch (5) to your desired band: AM, FM, or FM Stereo.
   • Turn the tuning knob (4) to scan for stations.
   • Watch the dial pointer (3) on the dial scale (2) to identify the frequency of the selected station.
4. Volume Adjustment: Use the volume control (1) to set the desired sound level. For a deeper bass sound, move the power switch (6) to the 'BBS ON' position.

Diagram Description: Illustrates the power switch positions (OFF and ON) and the band switch positions (AM/FM/FM Stereo). Another diagram shows the earphone jack.

Maintenance and Care

To ensure good performance and longevity of your radio:

• Avoid strong impacts, dropping, or exposure to extreme heat or humidity.
• If the sound is distorted or faint, replace the batteries.
• Do not charge, heat, or attempt to disassemble batteries, as this could cause leakage or explosion.
• If the radio will not be used for an extended period, remove the batteries to prevent corrosion.
• Internal components are factory-adjusted; do not attempt to adjust them yourself.

Cleaning the Cabinet

Clean the radio's cabinet with a soft cloth dampened with a mild detergent. Do not use alcohol, thinner, or other strong cleaning agents.

Power Supply

The radio operates on 2 AAA batteries. Insert batteries into the battery compartment (8), observing correct polarity.

Antenna Operation

• FM/FM Stereo: The wires of the connected earphone act as the FM antenna. For optimal reception, avoid coiling the earphone wires tightly. If the FM signal is weak, try moving the band switch (5) to the 'FM' band (to reduce noise). For strong signals, switch to 'FM Stereo' for the best reception.
• AM: The radio uses an internal magnetic antenna for AM reception. Rotate the radio's direction to achieve the best reception.

Technical Index

RF Energy Exposure and Product Safety Guide

ATTENTION!

Before using this radio, read this guide which contains important operating instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulations.

Local Government Regulations

When radios are used for employment purposes, local government regulations require users to be aware of and control their exposure to meet occupational requirements. This radio may have an RF Exposure Product Label, and this manual provides information to control RF exposure and satisfy compliance requirements.

Unauthorized Modification and Adjustment

Changes or modifications not expressly approved by the party responsible for compliance may void the user's authority to operate the radio. Transmitter adjustments should only be performed by certified technicians.

FCC Requirements

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received. This equipment has been tested and found to comply with Class B digital device limits, designed to provide reasonable protection against harmful interference in residential installations. It generates and can radiate radio frequency energy and may cause harmful interference to radio communications if not installed and used according to instructions.

RF Exposure Information

• DO NOT operate the radio without a proper antenna attached, as this may damage the radio and exceed RF exposure limits. Use only the supplied or manufacturer-authorized antenna with specified gain.
• To avoid interference, turn off the radio in areas where signs instruct you to do so.
• DO NOT operate the transmitter in areas sensitive to electromagnetic radiation, such as hospitals, aircraft, or blasting sites.

Avoid Choking Hazard

Small Parts. Not for children under 3 years.

Protect Your Hearing

WARNING

• Use the lowest volume necessary for your task.
• Turn up the volume only if you are in noisy surroundings.
• Turn down the volume before connecting a headset or earpiece.
• Limit the time you use headsets or earpieces at high volume.
• When using the radio without a headset, do not place the speaker directly against your ear.

Note: Excessive sound pressure from earphones and headphones can cause hearing loss. Exposure to loud noises from any source for extended periods can temporarily or permanently affect hearing. The louder the volume, the less time is required before hearing could be affected. Hearing damage may be undetectable at first and can have a cumulative effect.

Approved Accessories

WARNING

This radio meets RF exposure guidelines when used with Retekess-supplied or designated accessories. Use of other accessories may violate regulations. For a list of approved accessories, visit: http://www.Retekess.com

Compliance and Warranty Information

CE Requirements

(Simple EU declaration of conformity) Henan Eshow Electronic Commerce Co., Ltd declares that this radio equipment complies with essential requirements and other provisions of RED Directive 2014/53/EU, ROHS Directive 2011/65/EU, and WEEE Directive 2012/19/EU. The full text of the EU declaration of conformity is available at: www.retekess.com

Disposal

The crossed-out wheeled-bin symbol ♻️ on your product, literature, or packaging indicates that in the European Union, electrical and electronic products, batteries, and accumulators must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to local laws.

IC Requirements (Canada)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to two conditions: (1) This device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation.

(French translation provided in original document: Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage; (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.)

EU Importer

Name: Germany Retevis Technology GmbH

Address: Uetzenacker 29, 38176 Wendeburg

Guarantee

Please keep this guarantee card. Most new products carry a two-year manufacturer's warranty from the date of purchase. For warranty service, contact the seller or the local repair center and provide proof of purchase.

Exclusions from Warranty Coverage:

• Damage caused by accident.
• Misuse, abuse, or unauthorized alterations or repairs.
• If the serial number has been altered, defaced, or removed.

(Fields for Model Number, Serial Number, Purchasing Date, Dealer, User's Name, Country, Address, Post Code, Telephone, and Email are provided on the original document for the user to fill in.)

Manufacturer/Distributor Information:

Henan Eshow Electronic Commerce Co., Ltd

Add: 7/F, Sanjiang Building, No.170 Nanyang Road, Huiji District, Zhengzhou, Henan, China

Facebook: facebook.com/Retekess.ru

E-mail: support@retekess.com.ru

Web: retekess.com.ru

Made in China