Manuals+

Yealink ZVC Series Zoom Rooms Kit Quick Start Guide

Package Contents

Yealink ZVC800 Zoom Rooms Package

UVC80 Package (Camera)

CP960 Package

MCore Package

(Optional) MShare Package

Yealink ZVC500 Zoom Rooms Package

UVC50 Package (Camera)

The CP960, MCore, and (Optional) MShare packages for the ZVC500 kit are identical to those listed for the ZVC800 kit.

Yealink ZVC300 Zoom Rooms Package

UVC30 Room Package

The CP960, MCore, and (Optional) MShare packages for the ZVC300 kit are identical to those listed for the ZVC800 kit.

Yealink recommends using only accessories provided or approved by Yealink. Using unapproved third-party accessories may result in poor performance.

Overview of Yealink Solution for Zoom Rooms

The Yealink CP960 with Zoom Rooms version communicates with the MCore, which is connected to the same LAN. The CP960 functions as a Zoom Rooms controller, speaker, and microphone.

The MCore comes pre-installed with the Yealink Plugin for Zoom Rooms and the Zoom Rooms app. The UVC80, UVC50, and UVC30 cameras are plug-and-play.

Ensure both your CP960 and MCore have Internet access.

System Diagram Description:

Replace any cable immediately if its outer skin is broken.

Assembling the CP960

1a. Connect the power and wired network.

Connect the 7.5m Ethernet cable from the CP960 to your network. Connect the power adapter to the CP960 and a power outlet.

1b. Connect the power and wireless network.

Connect the power adapter to the CP960 and a power outlet. The CP960 can connect to Wi-Fi wirelessly. Refer to the Wireless Network Connection section in 'Configuring Your CP960' for more information.

2 (Optional). Connect the wireless microphone.

Steps:

  1. Place the CPW90 wireless microphone on its charging cradle.
  2. Connect the micro USB port on the charging cradle to the USB port on the CP960 using a 0.3m USB cable. The CPW90 will automatically enter registration mode.
  3. The mute LED indicator on the CPW90 will flash yellow rapidly. Swipe down from the top of the CP960 touch screen and tap Settings > MIC > +.
  4. Long press the mute key on the CPW90 for 5 seconds. The CPW90 will register with the CP960 conference phone automatically.
For more information about the Mute LED indicator on the CPW90, refer to the Yealink CPW90 Quick Start Guide.

Connecting the MCore

The MCore unit has various ports for connectivity:

For convenience, Yealink recommends connecting a wireless USB dongle to the back of the MCore to use a mouse and keyboard for device management.
For more information on how to assemble and install the MCore, refer to the Yealink MCore Quick Start Guide (EN, CN).

Pairing the Zoom Rooms with CP960

Before using the CP960 as the Zoom Rooms controller, it needs to be paired with the MCore. Both devices should have the Zoom Rooms Controller and Zoom Rooms app preloaded, respectively. Ensure the plugin is operational.

Procedure

  1. After the MCore is powered on, the Zoom Rooms app will start automatically, displaying a pairing code on the screen. If it doesn't start automatically, open the Zoom Rooms app manually. Note that the initial MCore setup may take time, requiring a wireless keyboard and mouse for Windows system configuration.
  2. Enter the pairing code displayed on the MCore's screen into the touch screen of the CP960.

Once the code is entered, the CP960 (Zoom Rooms Controller) will successfully pair with the MCore (Zoom Rooms app).

Screen Description: