Loshall Anti-Host Device
User Manual
01. Before You Start
This device is a smart finder that uses Google's Find My Device service, paired with the Loshall Anti-host Device.
Simple Connection Step-by-Step
Follow these steps to connect your Loshall Anti-host Device:
- Step 1: View the initial application home screen.
- Step 2: Initiate device pairing by tapping the prompt to start.
- Step 3: The device is detected and the connection process is underway.
- Step 4: The device is successfully connected, displaying its current status.
- Step 5: The device's location is shown on a map interface within the app.
Loshall Anti-host Device
Product Information
| Model: | F02B |
| Brand: | Loshall |
| Color: | Black |
| Material: | ABS |
| Weight: | 10g |
| Dimensions: | 30x30x8mm |
| Battery: | CR2032 |
| Connectivity: | Bluetooth 5.0 |
| Compatibility: | iOS 13.0+, Android 8.0+ |
| Waterproof: | IPX7 |
| Range: | Up to 50m (open area) |
Pairing Instructions
- Press the button for 3 seconds to enter pairing mode.
- Open the Find My Device app and tap 'Add Device'.
- Select 'Loshall Anti-host Device' from the list.
- Follow on-screen instructions to complete pairing.
Using the Device
- Find My Device: Ring your device from the app.
- Find Phone: Double press the button to ring your phone.
- Location Sharing: Share your device's location with friends.
- Left Behind Alert: Get notified if you leave your device behind.
Troubleshooting
| Problem | Cause | Solution |
|---|---|---|
| Device not connecting | Bluetooth is off on phone | Turn on Bluetooth on your phone. |
| Device is too far from phone | Move the device closer to your phone. | |
| Device battery is low or dead | Replace the battery. | |
| Device is already paired with another phone | Unpair the device from the old phone and pair with the new one. | |
| Cannot ring the device | Device is out of range | Move the device closer to your phone. |
| Device battery is low or dead | Replace the battery. | |
| Cannot ring the phone | Bluetooth is off on phone | Turn on Bluetooth on your phone. |
| Find My Device app is not running | Ensure the Find My Device app is running in the background. | |
| Left Behind Alert not working | Alert settings are disabled | Enable 'Left Behind Alert' in the Find My Device app settings. |
| Device is out of range | Move the device closer to your phone. |
Important Safety Information
⚠️ This device contains a small button battery. Keep out of reach of children. If swallowed, seek immediate medical attention.
Do not expose the device to extreme temperatures or moisture.
Do not attempt to disassemble or modify the device.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
