How to set up Loshall Card in the Apple Find My app:
First, make sure Wi-Fi [?] and Bluetooth [?] are turned on.
Make the Loshall Card discovered:
Click the power button. After the ringtone rings and the controlling light blinks in white, the Loshall Card is ready.
Turn on the Apple Find My app:
Click "Add Item", then click "Add Other Supported Item", then follow the instructions shown.
If you have added other items, you need to click on the "+" sign at the top right and enter it by clicking on "Add Other Items".
(Visual description: The Apple Find My app interface is shown, displaying the 'Items' tab. A 'Vallet' item is listed. Instructions indicate to swipe left on the item to remove it. Another visual shows the 'Add Item' screen with options like 'Loshall Card' and 'Key for car'. A third visual highlights the '+' sign at the top right for adding new items. A final visual depicts the Loshall Card with text indicating it is 'Unable to be linked'.)
How to remove items from the Apple Find My app:
Navigate to the item page on the Apple Find My app. Click "Items", then swipe left on the item you want to remove.
After removing it on the Apple Find My app, the Card will automatically shut down after 3 minutes. Subsequent relinking can be done by following the steps above.
Charge your card
Ensure that the charging position is aligned with the wireless charger.
Always turn on the red light while charging. Always turn on the green light when fully charged.
(Visual description: Two diagrams illustrate the Loshall Card on a wireless charger. The left diagram shows proper alignment for charging, indicated by a green dot on the card. The right diagram shows the card charging, indicated by a red dot.)
Safe electronical disposal
The earth is our common home, and LOSHALL attaches great importance to protecting the cleanliness of the environment and avoiding its pollution. When your device reaches the end of its useful life, please dispose of it at your local waste center to be recycled and properly discarded.
How to restoring the factory setting.
Click the power button four times, and then press the power button for some seconds long. When the ringtone sounds, the light flashes in white quickly. That is completed.
Warning
- This product is not a toy or edible.
- Obstacles or large metal objects can interfere with the Bluetooth signal.
- This product has a built-in lithium battery. Please do not put this product directly on fire or any place near heat or fire, otherwise, the product may be damaged or malfunctioned, or even be dangerous.
Disclaimer
- This is neither an anti-theft nor an anti-lost device.
- This device provides the last detected location.
Limited warranty
Loshall offers a one-year limited warranty against product defects, effective from the time of delivery. Product defects do not include those resulting from accidents, product modification, or failure to follow instructions for use.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
