Somic ZM-HPS700W 2.4G Wireless Gaming Headset User Manual
This document provides instructions for the Somic ZM-HPS700W wireless gaming headset.
Product Overview
The Somic ZM-HPS700W is a 2.4G wireless gaming headset.
Key Components:
- Headset
- USB Receiver (Dongle)
- Pluggable Microphone
- USB Charging Cable
- 3.5mm Audio Cable
Connections
Microphone Interface
Connect the detachable microphone to the designated microphone interface on the headset.
Warning: Do not insert the microphone into the AUX interface, as this will prevent the headset from turning on.
AUX Interface
This interface is for wired connections using a 3.5mm audio cable.
Charging Port
Connect the USB charging cable to charge the headset.
Headset Charging Indicator:
- Solid Red: Charging
- Solid Green: Fully Charged
- Flashing Red: Battery below 10% (charge needed)
Headphones - Automatic Connection
- Insert the USB receiver into the USB port of your computer or host. The blue indicator light on the USB receiver will flash.
- Press and hold the headset's power button for 3 seconds. Release when the light turns on.
- The USB receiver will automatically connect to the headset. A solid blue light on the USB receiver indicates a successful connection.
Note: If the headset fails to power on, please charge it and try again.
Headphones - Manual Connection
Use this method if automatic connection fails.
- Turn on the headset and plug the USB receiver into the computer/host USB port (blue light flashes).
- Long press the microphone on/off button for 3 seconds. The headset's blue light will flash quickly, then release to enter forced pairing mode.
- A solid blue light on the USB receiver indicates a successful connection.
Headset Controls
- Power On/Off: Long press the power button for 3 seconds.
- Mode Switch: Short press the mode switch button to cycle through sound modes. The headset light color indicates the mode:
- Colorful: Game Mode
- White: Video Mode
- Blue: Voice Mode
- Light On/Off: Short press the light button to toggle the headset lighting.
- Microphone On/Off: After plugging in the microphone, short press the microphone button to turn it on or off.
- Volume: Use the Volume +/- buttons to adjust the audio level.
- Reset Button: In case of unresponsiveness, use a sharp object to press and hold the reset button for 3 seconds to force a shutdown.
Wired Mode
Connect one end of the 3.5mm audio cable to the headset's AUX interface and the other end to your host device.
Note: In wired mode, only the volume adjustment (+/-) functions are available. All other controls are disabled.
Cautions
- Compatibility: The headset is compatible with Microsoft Windows 7/8/10, Apple Mac OS, and PS4. For unlisted systems or devices, contact after-sales support.
- No Sound: If there is no sound from the microphone or headset, it may be due to driver compatibility or improper use. Contact after-sales support for assistance.
- Damage: If any part of the headset is damaged (e.g., broken cable), stop using it and contact after-sales support to prevent further issues.
- Unresponsiveness: If the headset becomes unresponsive, use a paperclip or similar sharp object to press and hold the reset button for 3 seconds for a forced shutdown.
- Further Information: Visit the official Somic website at www.itsomic.com for more details.
FCC Compliance Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Risk of explosion if the battery is replaced by an incorrect type. Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion. Leaving a battery in an extremely high temperature surrounding environment or a battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
Product Information
Product Model: ZM-HPS700W
Product Serial Number: [Not specified]
Purchase Information:
- Order Number: [Not specified]
- Purchase Account: [Not specified]
- User Name: [Not specified]
- Contact Phone: [Not specified]
- Mailing Address: [Not specified]
Warranty Information
Somic Headphone Warranty Statement
Somic Headphone After-Sales Service Commitment: Strictly in accordance with the "Consumer Rights Protection Law of the People's Republic of China" and the "Product Quality Law of the People's Republic of China" to implement after-sales three guarantees service, the service content is as follows:
Within the three guarantees period, you can enjoy the rights of repair, replacement, and return according to this regulation. The rights of repair, replacement, and return should be handled with the invoice or valid sales certificate.
- Within 7 days from the date of signing, if the product has quality problems, you can enjoy return, exchange, or free repair services.
- Within 8-15 days from the date of signing, if the product has quality problems, you can enjoy exchange or free repair services.
- Within 12 months from the date of signing, if the product has quality problems, you can enjoy free repair services.
Non-Warranty Regulations:
- The three guarantees period has expired.
- Unable to provide invoice or valid sales certificate.
- The product information on the invoice or valid sales certificate does not match the actual product.
- Damage caused by unauthorized repair, misuse or modification, or force majeure.
Customer Feedback:
Dear Customer:
Hello! When applying for after-sales service, please fill in the product warranty card according to your actual situation. Please send the product and product warranty card back to the merchant where you purchased the product. Thank you!
1. Please check the reason for after-sales service:
- □ Poor function
- □ Not aesthetically pleasing
- □ Uncomfortable to wear
- □ Other: [Please specify]
2. Please check the desired after-sales option:
- □ Replacement
- □ Repair
- □ Return
3. Please provide us with your valuable opinions:
Note: Please consult the merchant for the specific after-sales address.
Contact Information
Guangdong Somic Technology Co., Ltd.
Official Website: www.somic.cn
Customer Service Hotline: 400-698-9993
Email: itsomic@163.com
Scan the QR code to follow Somic's official WeChat for more product information.
