SOMIC GS609 Wireless Gaming Headset
Product Features
- Convenient Dual Mode: 2.4G wireless and 3.5mm wired connection.
- Custom-tuned high-quality sound unit for excellent audio performance.
- Detachable microphone.
- Skin-friendly, soft leather earmuffs for comfortable wear.
- Lightweight design for zero pressure during long wear.
- Game/Video dual modes to satisfy entertainment needs.
- Cool RGB LED lighting design for a stylish look.
Operation Instructions
Description of Headset Layout
The headset features controls and ports on its earcups and headband. Key components include:
- [1] Power Switch: Located on the earcup.
- [2] Mode Switch: Located on the earcup.
- [3] RGB Light Switch: Located on the earcup.
- [4] Microphone Switch: Located on the earcup.
- [5] Reset Hole: A small hole for resetting the device.
- [6] Volume Roller: Located on the earcup for adjusting volume.
- [7] 3.5mm Line In Jack: For wired audio connection.
- [8] 3.5mm Microphone Jack: For connecting the detachable microphone.
- [9] RGB Lighting: LED lighting effect on the headset.
- [10] Type-C Charging Socket: For charging the headset.
- [11] Charging Indicator: An LED to show charging status.
Description of Button Functions
- [1] Power Switch: Long press for 3 seconds to turn the device on or off.
- [2] Mode Switch: After successful pairing, press this button to switch between three sound effect modes: Game, Live Streaming, and Audio/Video. The default mode upon power-on is Game Mode.
- [3] RGB Light Switch: Click once to turn off the RGB LED light; click again to turn it back on.
- [4] Microphone Switch: Click once to turn off the microphone; click again to turn it on. A short 'Du' tone indicates the microphone is off, and a long 'Du' tone indicates it is on. The microphone is on by default when powered on.
- [5] Reset Hole: If the headset freezes or cannot be turned off, insert a thimble into this hole to trigger the internal reset button and power off the device.
- [6] Volume Roller: Scroll up to increase volume; scroll down to decrease volume.
- [7] 3.5mm Line In Jack: Plug in the audio cable to automatically switch to LINE IN wired mode.
- [8] 3.5mm Microphone Jack: The microphone is detachable.
- [9] RGB Lighting: When powered on and not paired, the light has a blue breathing effect, cycling every two seconds. After successful pairing and entering Game Mode, the RGB lighting displays a seven-color breathing effect (red, yellow, orange, green, blue, purple, white, cycling every two seconds). Audio/Video mode features solid white light, and Live Streaming mode features solid blue light.
- [10] Type-C Charging Socket: For charging the device.
- [11] Charging Indicator Light: Red light indicates charging; green light indicates fully charged.
- Attention: The headphone cannot power on in a low battery status.
Technical Parameters
| Parameter | Value |
|---|---|
| Mic Dimensions | Ф9.7x4.5mm |
| Sensitivity | -38±3dB |
| Directivity | Omnidirectional |
| Impedance | ≤ 2.2ΚΩ |
| Speaker Diameter | Ф50mm |
| (SPL)/Sensitivity | 111±3dB |
| Impedance | 32Ω+15% |
| Frequency Response | 20Hz~20KHz |
| Battery Capacity | 1000mAh |
| Working Time | ≈11H |
| Plug | 3.5mm four-level plug |
| Working Frequency | 2.4G |
| Net Weight | ≈320g |
| USB Dongle | 10g |
| Effective Distance | 10m (Depending on the environment) |
Important Notes (Warning!)
- The maximum input voltage for charging is 5.25V. To protect your legitimate rights, please use a charger purchased from regular channels. The charger's nominal voltage should be 5V, and its output current should be greater than 1A.
- Do not leave the battery depleted for extended periods. When not using the headset for a long time, please ensure it is fully charged.
- When inserting the microphone rod, please ensure it is aligned with the correct direction and apply appropriate force to prevent damage to the microphone interface.
- The product contains no user-serviceable or replaceable parts. Unauthorized disassembly or modification is prohibited.
- For any inquiries, please contact SOMIC official After-sales Service.
FCC Compliance Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
FCC ID: 2A3UU-GS609T
