General Guidelines and Safety Information
Please read the following instructions carefully and use the product accordingly. Retain this manual for future reference. This summary may not include every detail of all variations and considered steps. Please contact customer support for further information and help if needed.
Intended Use: The product is intended for indoor use only. It must be assembled and used in accordance with the provisions of this manual. Personal injury and/or damage to the product may occur if products are used outside of their intended purposes or if products have been changed/modified from their original design. The seller does not assume any responsibility or liability with respect to any injury/damage caused by incorrect assembly or improper use.
Safety Precautions:
- Keep the product away from fire sources and high temperatures.
- Please assemble the item on a spacious surface and do not place the unwrapped product directly on the ground to avoid product damage.
- Please wear gloves during the assembly and/or disassembly process to avoid scratches from any sharp edges.
- Periodically inspect screw tightness while the product is in use. If necessary, retighten to ensure structural integrity.
- If you accidentally spill water or another liquid on the surface, immediately wipe clean with a dry towel.
- Please place this item on level, solid ground during use.
Warnings for Children:
- It is not intended for use by children under 3 years of age. Children must be under adult supervision to use the product.
- Children should not climb or play on the product to avoid tipping over the furniture and causing serious injury.
- During assembly, keep all small parts out of the reach of children. Small parts may be fatal if swallowed or inhaled.
- To avoid the potential dangers of suffocation, please keep all parts and packaging (film, plastic bags, foam, etc.) away from babies and children.
Parts List
| Part ID | Description | Quantity |
|---|---|---|
| 01 | Spare plastic hardware | 1 (set) |
| A1 | Side Panel | 2 (+1 spare) |
| A2 | Back Panel | 1 |
| B | Support Beam | 1 (+1 spare) |
| C | Connecting Panel | 2 |
| D | Connecting Panel | 2 |
| E | Shelf/Divider | 1 |
| F | Backing/Door Panel | 1 |
| G | Wall Mounting Bracket | 1 |
| H | Support Bracket | 2 |
| I | Internal Divider/Support | 2 |
| J | Hinge/Fastener | 3 |
| K | Mounting Plate | 1 (+1 spare) |
| L | Base/Top Panel | 1 (+1 spare) |
Assembly Instructions
- Step 1: Prepare Main Panels.Attach the two A1 side panels to the A2 back panel. Ensure they are aligned correctly and securely fastened.
- Step 2: Form the Frame.Connect the two C panels and two D panels to the assembled A1/A2 structure. These pieces form the main sides and the top/bottom of the unit.
- Step 3: Install Internal Supports.Insert the two I pieces between the C and D panels. These likely serve as internal dividers or structural supports within the unit.
- Step 4: Attach Mounting Plate.Attach the K piece to the A2 back panel. This piece is likely a mounting plate or a key structural component for stability.
- Step 5: Continue Frame Assembly.Connect the C and D panels to the A2/K assembly, further building the main frame of the unit.
- Step 6: Add Support Beam.Attach the B support beam to the A2/K assembly. This beam provides additional structural integrity.
- Step 7: Install Support Brackets.Attach the two H support brackets to the B component. These brackets likely reinforce the structure.
- Step 8: Insert Shelf/Divider.Insert the E piece. The diagram indicates it can be placed in multiple positions ('First', 'Second', 'Third'), suggesting it functions as an adjustable shelf or internal divider.
- Step 9: Attach Backing/Door and Fasteners.Attach the F piece (potentially a backing or door panel) and the three J pieces (likely hinges or fasteners for the F panel).
- Step 10: Install Final Panel.Attach the L piece, which is likely a base or top panel, completing the main structure.
- Step 11: Wall Mounting.Attach the G (Cabinet WALL) component to the unit and then mount the entire unit to a wall. This step ensures stability and prevents tipping. Follow all safety guidelines for wall mounting.
