Fanatec Podium Racing Wheel F1 Quick Guide
Brand: Fanatec
Product: Podium Racing Wheel F1®
This guide provides essential setup and operational information. For comprehensive details, please refer to the full user manual available at www.fanatec.com/support.
Warranty: This product is under warranty by Endor AG, Seligenthaler Straße 16a, 84034 Landshut, Germany. Contact: +49 (871) 9221-122, Fax: +49 (871) 9221-221, Email: info.webshop@fanatec.com. Refer to the 'warranty' chapter of the user manual and Endor AG's terms & conditions at https://www.fanatec.com.
Included Components
- PS4™ Compatible Podium Wheel Base (A): The main unit of the racing wheel system.
- ClubSport Steering Wheel F1® PS4™ with APM (B): The steering wheel accessory.
- Power supply unit (C): Provides power to the wheel base.
- Power cord (regional) (D): Connects the power supply to the wall outlet.
- USB connection cable (E): Connects the wheel base to a PC or console.
- Cylinder head screw ISO 4762 M6x20 (F): Used for securing the steering wheel with the simplified Quick Release.
- RJ12 connection cable for Pedals (G): Connects Fanatec pedals to the wheel base.
- Torque Key (H): Used to unlock the full torque potential of the wheel base.
- Racing style button caps (I): Optional accessories for customizing buttons.
Mounting the Podium Wheel Base
Side Mounting: The wheel base features two M8-threaded holes on each side for mounting purposes.
Bottom Mounting: The bottom of the wheel base has five M6-threaded hole patterns. These support Fanatec's triangular mounting system and square mounting (78.4mm x 66mm). Using the front center hole along with the two rear holes (Fanatec Triangular mounting) is sufficient for secure use.
Attaching the Steering Wheel
Simplified Quick Release:
- Turn the locking ring clockwise towards the back of the shaft. Ensure the rubber ring is not compressed.
- Carefully push the steering wheel onto the shaft.
- Tighten the clamping ring using the M6x20 screw (F) from the Podium Wheel Base accessories. Important: Do not use the M6x16 screw provided with your steering wheel; use the specific screw (F) from the Podium Wheel Base package.
Fanatec ClubSport Quick Release:
- Pull and hold the Quick Release sleeve.
- Carefully push the steering wheel onto the shaft.
- Release the sleeve to secure the wheel.
- When using the ClubSport Quick Release on a Podium DD Base, no additional screw is required.
- Turn the locking ring counter-clockwise for a tight fit.
To remove the wheel, reverse the attachment procedure.
Power On and Off
To Turn On: Connect the power supply and press the POWER BUTTON on the back of the wheel base for approximately one second. The optional Podium Kill Switch also has a power button.
To Turn Off: Press and hold the POWER BUTTON for 5 seconds, then release.
Torque Key Usage
The Torque Key (H) is essential for unlocking the full torque capabilities of the Podium Wheel Base. A safety warning will be displayed before use.
Safety Precautions:
- The Torque Key is not inserted at the factory for safety reasons. Read all safety warnings before use.
- To protect inexperienced users and children, it is recommended to remove the Torque Key when the wheel base is not in use or is unattended.
- Ensure the Torque Key is inserted only into the designated "Torque Key" port and not into any other ports on the wheel base or other devices.
Connections
❗ IMPORTANT! When connecting the power supply (C), connect it to the DD Wheel Base (A) BEFORE connecting it to the power outlet/socket (D).
USB to PC/Console: Use only the straight USB plug provided with this product to avoid damage to the USB port.
Pedals: Connect Fanatec pedals using the RJ12 connection cable (G).
Shifters: Supports Static Shifters, Sequential Shifters (in SQ mode), and H-Pattern Shifters.
Handbrake: Connect the optional Handbrake.
Podium Kill Switch: Connect the optional Podium Kill Switch.
Connection to CAN BUS: For compatible accessories.
Power Plug: Plug in with the clamping hook pointing upwards. Unplug by pressing down the clamping hook.
Firmware Update and Compatibility
When starting up the Podium Wheel Base for the first time, please update the firmware. Obtain firmware from www.fanatec.com/downloads and follow the user manual instructions.
PlayStation®4 Compatibility: Compatibility with PS4™ games varies. For a full list of compatible games, visit www.fanatec.com.
PC Compatibility: PC compatibility is not tested nor endorsed by Sony Interactive Entertainment Europe.
Cooling and Airflow
Do not cover the air intake on the front side with accessories. Keep at least 10cm of clear space behind the wheel base to ensure proper cooling airflow.
Calibration
Center Calibration: If center calibration is needed (e.g., after a firmware update), enter the tuning menu by pressing the tuning button. With the tuning menu active, press the analogue stick and the FunkySwitch™ simultaneously to calibrate the wheel center.
Shifter Calibration: To enter shifter calibration mode, simultaneously press the tuning button and the button highlighted in the manual's diagram (refer to the shifter's Quick Guide for specific details).
Modes
To change the operating mode, simultaneously press two specific buttons on the attached steering wheel. The required button combination varies by steering wheel model; consult your wheel's quick guide.
The current active mode is indicated on the wheel base's OLED display:
- PS4™: For PlayStation®4 and compatible Fanatec steering wheels.
- PC: For Windows PCs and compatible Fanatec steering wheels.
- Comp V2.5: For older Windows PC games that do not support the Podium Wheel Base DD1, emulating a CSW V2.5.
- Comp PS4: For older PlayStation 4 games that do not support the Podium Wheel Base DD1, emulating a CSL Elite Wheel Base+.
Base Display Screens and Tuning Options
The Podium Wheel Base OLED display typically shows the Fanatec logo, detected peripherals, USB connection, and operation mode. It can also display alternative screens like firmware versions, torque curves, or device temperatures.
To switch between screens: Press and hold the tuning menu button of the attached steering wheel, then navigate through the screens using the FunkySwitch™ directions.
Tuning Menu:
- To enter the tuning menu, press the tuning menu button once.
- Navigate within the menu using the FunkySwitch™. Press up or down to access different setups (up to 5). Press left or right to cycle through options. Turn the FunkySwitch™ to adjust option values.
Manufacturer Information and Compliance
Manufactured by: Endor AG, Seligenthaler Straße 16a, 84034 Landshut, Germany.
Developed by: Endor AG in Germany.
Contact: Telephone: +49 (871) 9221-122, Fax: +49 (871) 9221-221, Email: info.webshop@fanatec.com, Website: www.fanatec.com - www.endor.ag.
Licensing: Licensed for sale in Europe and Australia and for use exclusively with PlayStation®4.
The F1 FORMULA 1 logo, F1 logo, FORMULA 1, FORMULA ONE, F1, FIA FORMULA ONE WORLD CHAMPIONSHIP, GRAND PRIX and related marks are trademarks of Formula One Licensing BV, a Formula 1 company. Licensed by Formula One World Championship Limited, a Formula 1 company. All rights reserved.
Compliance: This product complies with RoHS requirements (EU Directive 2011/65/EC).
Origin: Made in China.
Date: 01/2019
