Fanatec ClubSport DD Wheel Base
Package Contents
- 1x ClubSport DD Wheel Base
- 1x PSU (~140 cm)
- 1x USB Type-A to Type-C Cable (~290 cm)
- 4x T-Nut (M6x8 mm)
- 1x Power Cord (Regional) (~160 cm)
Getting Started
For detailed setup, refer to the video manual, download the Fanatec app, and get the latest drivers:
- Video Manual: Fanatec.com/QR/CS-DD [QR Code for Video Manual]
- Fanatec App: Fanatec.com/app [QR Code for App]
- Drivers: Fanatec.com/driver [QR Code for Drivers]
Passive Cooling
The device may utilize passive cooling. A warning symbol (❌) is depicted next to a fan, while a confirmation symbol (✔️) is shown next to a heatsink, suggesting passive cooling is the preferred method.
Hard-Mounting
Diagrams illustrate mounting points on the bottom and side of the wheel base. A crucial warning states: "Not for hard-mounting the wheel base!" Screw dimensions for mounting are indicated as 10 mm X mm, requiring M6x(10+X) mm screws.
Connections
Connect your peripherals to the following ports:
- SHIFTER1
- CAN
- SHIFTER2
- PEDAL
- HANDBRAKE
Future FANATEC® CAN Peripherals can also be connected.
On & Off
To turn the device ON, press and hold the power button for 3 seconds. To turn it OFF, press and hold the power button for 3 seconds.
Modes
The wheel base supports PC Mode and XBOX Mode. It also features a 'Repeat' function. Note that modes are steering wheel dependent.
Firmware Update
Firmware can be updated via PC. Follow the on-screen instructions during installation.
Support
For technical support, manuals, and FAQs, please visit:
- Fanatec.com/manuals
- Fanatec.com/QR/CS-DD
- Fanatec.com/app
- Fanatec.com/support/faq
Warranty and Compliance
The product warranty is provided by Endor AG. Refer to the included warranty sheet and the terms & conditions of Endor AG on fanatec.com.
This device complies with FCC rules (Part 15) and Canadian ICES-003. It also adheres to China RoHS 2 regulations, establishing an Environmental Protection Use Period (EPUP) of 10 years.
China RoHS 2 Hazardous Substances Table
The following table indicates the presence of hazardous substances in product components:
Part Name | Hazardous Substances | (Pb) | (Hg) | (Cd) | (Cr6+) | (PBB) | (PBDE) |
---|---|---|---|---|---|---|---|
Cable/Adaptor | O | O | O | O | O | O | O |
Plastic | O | O | O | O | O | O | O |
Metal parts | O | O | O | O | O | O | O |
Other enclosure components | O | O | O | O | O | O | O |
PCBA | O | O | O | O | X | O | O |
Note: 'O' indicates the substance is below the limit requirement; 'X' indicates it is above the limit requirement.
Contact Information
Manufactured and distributed by Endor AG:
Endor AG
E.ON-Allee 3 - 84036 Landshut - Germany
EU: 00800 0 FANATEC or +49 (871) 9221-122
US/CANADA: 011 800 0 FANATEC or +49 (871) 9221-122
AUSTRALIA: 00800 0 FANATEC or +49 (871) 9221-122
JAPAN: +81 306 7172-719
Email: info.webshop@fanatec.com
Website: www.fanatec.com, www.endor.ag
Imported and distributed by Endor America LLC:
Endor America LLC
8200 Wilshire Blvd. Suite 200 - Beverly Hills CA 90211 - USA
Telephone: +1 321-655-3524
Email: info.webshop@fanatec.com
Website: www.fanatec.com, www.endor.ag
Endor Australia Pty Ltd
3 Staley Street, California Gully, Vic, 3556 - Australia
Telephone: 661 453 979 40
Email: webshop@fanatec.com
Website: www.fanatec.com, www.endor.ag
Endor Japan Kabushikigaisya
E5001 3-13-1, Harumi Cyuo-ku Tokyo-to Tokyo 104-0053 - Japan
Telephone: 03-6717-2719
Email: webshop@fanatec.com
Website: www.fanatec.com, www.endor.ag
Fanatec® is a registered trademark of Endor AG. Designed and developed by Endor AG in Germany.
Made in China