Gembird BHP-LED-01 Bluetooth Stereo Headset with LED Light Effect

Features

• Bluetooth stereo headphones with LED light effects
• Up to 4 hours of listening time on a single charge
• Automatically mutes your music in case of incoming calls
• Multifunction button, volume control, and low battery indication
• Can also be used as a wired headset (includes 3.5 mm audio cable)
• Comfortable ear cushions and adjustable headband

Specifications

• Interface: Bluetooth v.5
• RF transmit power: 9 dBm
• RF receive sensitivity: -85 dBm
• Supported profiles: HSP, HFP, A2DP and AVRCP
• Battery: Rechargeable 200 mAh Li-ion battery
• Recharging time: Up to 2 hrs
• Operation distance: Up to 10 m in the open air
• Speakers frequency response: 20 Hz - 20000 Hz
• Signal to noise ratio: > 83 dB
• Impedance: 32 Ohm, 105 dB sensitivity
• Microphone: 6 mm, -42 dB sensitivity
• Operating power: 3.7 VDC, up to 40 mA
• Dimensions: 175 x 177 x 78 mm (L x W x D)
• USB charging cable length: 0.3 m
• Net weight: 150 g

Diagrams and Operation

Connections

The headset can be connected via Bluetooth. It also features a 3.5mm audio jack for wired use and a USB port for charging.

• MicroSD Card Slot: The headset has a slot for microSD cards (e.g., 16GB micro HC).
• Wired Connection: A 3.5mm audio cable connects the headset to a smartphone or other audio source.
• Charging: A USB charging cable connects the headset to a USB power adapter or port.

Controls and Functions

The headset features several buttons for control:

• Power/Pairing Button: Short press (< 1 sec) to turn the headset on/off or initiate pairing. Long press (> 2 sec) to control the LED light effect.
• Volume Up / Track Forward Button: Short press to increase volume. Long press to skip to the next track.
• Volume Down / Track Back Button: Short press to decrease volume. Long press to go to the previous track.
• Multifunction Button: Press to play/pause music. Press to answer or end a call.

Bluetooth Pairing

To connect wirelessly:

1. Turn on Bluetooth on your device (e.g., smartphone).
2. Search for available Bluetooth devices.
3. Select "BHP-LED-01" from the list and connect. The headset's LED will indicate a successful connection.
4. If prompted, enter the PIN "0000" to pair the device.

Declarations and Compliance

Declaration of Conformity: This product complies with the essential requirements of RED (2014/53/EU) and RoHS (2011/65/EU). The CE declaration can be found at www.gmb.nl/certificates.

Waste Disposal: The crossed-out wheelie bin symbol ?️❌ indicates that this product should not be disposed of with normal household waste. Electronic and electrical equipment containing hazardous substances must be disposed of responsibly at an approved waste or recycling facility.

Warranty Information

Warranty Period: 24 months from the date of purchase.

Requirements: Keep the purchase receipt clearly listing the date and part number for all warranty claims.

Exclusions: Warranty does not cover damage from misuse, abuse, external impact (drops, water ingress, dust, etc.), or wear parts like rechargeable batteries.

Contact: Gembird Europe B.V., Wittevrouwen 56, 1358CD Almere, The Netherlands. For support, visit www.gembird.nl/service or email helpdesk@gembird.nl.