Baseus Magnetic Wireless Charging Power Bank 6000mAh 20W

1. Product Parameter

Name: Wireless Fast Charge Power bank 6000mAh

Model No: PPCXW06

Battery: Polymer Lithium Battery

Capacity: 6000mAh/3.85V (23.1Wh)

Rated Capacity: 3500mAh (5V-2.4A)

Energy conversion rate: ≥75%

Type-C Input: 5V-2.4A; 9V-2A; 12V-1.5A

Type-C Output: 5V-2.4A; 9V-2.22A; 12V-1.5A

Wireless Charge output: 15W

Total Output: 5V-2.4A

Transmission frequency: 115-205kHz

Product Size: 97.4x 63.8x 14.7mm

Product Weight: About 140g

2. Packing list

• Power Bank *1
• User Manual *1
• Warranty card *1
• Charging Cable *1

3. Product Diagram

Power Switch

Type-C IN/OUT

20W

4. Product description

This product is a portable charging device that can provide wired or wireless charging for mobile phones, tablets, e-books, game machines and other digital products. The product has the characteristics of two in one of wired charging and wireless charging, ip20w PD fast charging, Type-C dual way fast charging, 15W wireless fast charging, etc. Product built-in FOD, overcharge, over discharge, temperature protection and other safety protection circuit.

5. Use environment

Use ambient temperature: non-tropical area below 0°C to 35 °C

6. Icon description

The 5-year icon refers to the "effective life of environmental protection", not the product quality assurance period. Electronic products all contain toxic and harmful substances such as lead, mercury and cadmium. Once they are overused, toxic and harmful substances may leak or mutate, cause pollution to the environment, or cause serious damage to people and property. The term of "environmental protection use" means that all electronic products will be required to use within this effective period. We will no longer be responsible for the quality of the products due to the safety risks that arise after the safe use period.

7. Operation description

The power button operation instructions

For viewing electric quantity:

Press the button once to initiate the power output function, when you can view the remaining electric level of the power bank. After lit for 30sec, the LED indicator will extinguish automatically.

Operation for discharging by cable:

Connect the USB charging cable to the corresponding output port of the power supply, and the power supply will automatically turn on the output. Due to compatibility problems, some smart phones need to press the key to turn on the power output function, which is a normal phenomenon and need not be ignored. Press the key once to supply power to the external equipment. Press the key once to output power for about 30 seconds. If there is no external load in 30 seconds, the power output will be automatically turned off.

Operation for discharging by wireless:

When the power indicator lights up for about 30 seconds, the mobile phone will be charged for wireless charging within 30 seconds. If the mobile phone is placed in the wireless charging area of the power supply, the mobile phone can be charged for wireless charging. If there is no wireless charging access within 30 seconds after one key, the product will automatically turn off the wireless charging function.

8. Wireless charging tips

The wireless charging mobile phone should be placed in the wireless charging area of the product (the transmitting area of the wireless charging coil is illustrated in the figure) for wireless charging. The wireless charging distance is within 8 mm. If the distance exceeds 8 mm, the wireless charging can not be carried out. Please adjust the wireless charging distance within the wireless charging range.

9. Safety warning instructions Tips

9.1. The charging contact surface on the back of the mobile phone should not be covered with metal materials, such as iron sheet, ring, metal protective case, etc.

9.2. When the mobile phone is charging, if intermittent charging or serious heating is found, it may be that the receiving coil of the mobile phone is not completely aligned with the wireless charging coil, or there is metal foreign matter in the protective sleeve of the mobile phone. Please try to cool the mobile phone, remove the protective case, and then align it in the correct position.

9.3. Please do not disassemble the machine by yourself. Improper use or improper placement of the product by the user may reduce the service life or damage the product. Therefore, the responsibility does not belong to the warranty responsibility or the manufacturer's responsibility. Please understand.

9.4. Mobile power has conversion efficiency, so the battery capacity of mobile power is not equal to the rechargeable capacity.

9.5. Please charge your power regularly (at least every 5 months is recommended) to maintain its long service life.

9.6. In case of any personal and property damage caused by consumers' improper use or warning in violation of the product instructions, the company will bear all consequences, and the company will not bear any legal liability.

9.7. Avoid using electrical appliances or loads that exceed the output current of the product (the circuit will be protected, no output).

9.8. Avoid strong physical effects, including knocking, throwing, trampling, squeezing, etc.

10. Statement on Toxic and Hazardous Substances in Electronic Information Products:

This form is compiled in accordance with SJ/T 11364.

0: It indicates that the content of the toxic and harmful substance in all homogeneous materials of the component is below the limit specified in GB/T 26572 standard.

X: The content of toxic and harmful substances in at least one homogeneous material of this part exceeds the limit stipulated in GB/T 26572 standard.

The product complies with EU ROHS 2.0 directive (2011/65/EU)

This equipment complies with the provisions of Directive 2012/19/EU and Directive 2006/66/EU. It is strictly forbidden to dispose of this equipment with ordinary trash; it must be recycled. This symbol indicates that the product shall not be treated as regular domestic trash, and must be delivered to a recycling center that is capable of recycling electronic and electrical equipment.

Manufacturer: Shenzhen Times Innovation Technology Co., Ltd.

Add: 5th Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District Shenzhen

Executive Standard: GB/T 35590-2017

Hotline: +86-4000-712-711 Website: www.baseus.com

PB3323Z/P0A0

Designed by Baseus CEFC

Made in China

Warning: Please follow the above safety instructions otherwise it will cause fire, electric shock, damage or other damage.