Baseus Magnetic Mini Wireless Fast Charge Power Bank 20000mAh 20W
This document is the user manual for the Baseus Magnetic Mini Wireless Fast Charge Power Bank 20000mAh 20W. Please read this manual carefully before use and keep it for future reference.
Safety Instructions and Warnings
Improper use of the product may lead to battery malfunction or severe overheating, which may cause fire or explosion. To avoid personal injury and property damage, please follow the instructions below when using and storing this product.
- This device is NOT a toy! Keep it out of reach of children. Do not allow children to operate this device, as it may result in an accident.
- Charge this device using a charger that complies with local safety standards, taking into account all dangers and risks of damage.
- Do NOT apply pressure to the device or avoid hitting it. The battery and power circuit may be damaged if the device falls from a great height, experiences a strong shock, or is immersed in liquid. In such cases, avoid using the product.
- If the device becomes deformed, stops being sealed, or its performance drops significantly, stop using it.
- Do NOT charge the power bank or other devices in places that restrict heat dissipation from their casing, such as trouser pockets, closed bags, beds, or sofas. The device should not be covered while operating. When charging other devices for a long time, do NOT place any device on the power bank, as this may restrict heat dissipation from its casing.
- Do NOT disassemble, apply pressure to, puncture, immerse in water, throw into fire, expose to high temperatures or heat sources above 140°F (60°C), or short-circuit the device.
- Do NOT place the device in places with extremely high temperatures. For example, in direct sunlight or in a vehicle with a higher internal temperature.
- This device contains lithium batteries, do NOT disassemble it! This could lead to danger or damage to the battery.
Instructions for Use
- Fully charge the device before first use. Power banks have a certain energy conversion efficiency, so the capacity of the power bank is not equal to the energy that can be used to charge another device.
- Choose an appropriate charger to recharge the power bank and appropriate cables when charging other devices.
- Ensure supervision during charging of this device. Do NOT charge the device unattended.
- After charging the power bank or another device, disconnect the cable to maintain product integrity.
- If the indicator does not light up after pressing the power button, recharge the product.
- When storing the power bank for a long time, the battery charge level should be between 25% and 50%. Place the device in a dry and cool environment. To limit battery aging, avoid storing the product with an empty or fully charged battery.
- Do not disassemble the product yourself. Improper use or placement of the product may shorten its lifespan or cause damage, for which our company is not legally responsible or provides a warranty. We appreciate your understanding.
- When charging wirelessly, there should be no metal objects or materials (such as iron plates, rings, phone cases, etc.) between the back of the charging phone and the charging area.
- If any interference or overheating occurs during wireless charging, it may mean that the phone's receiver coil is not perfectly aligned with the wireless charging coil. It may also mean that there is a metal object in the phone's case. Try cooling the phone first, remove the protective case, and then place it in the correct position.
Product Parameters
- Name: Powerbank
- Model Number: PPCXM20
- Battery: Lithium-polymer
- Capacity: 20,000 mAh / 74 Wh
- Energy Conversion Efficiency: ≥75%
- Type-C Input: 5V=3A; 9V=2A
- Type-C Output: 5V=2.4A; 9V=2.22A; 12V=1.5A
- Wireless Output Power: 5W/7.5W/10W/15W
- Total Output Power: 5V=2.4A
- Device Dimensions: 111.3×70.4×30.9 mm
- Device Weight: Approx. 360g
Package Contents
- Powerbank, 1 pc.
- User Manual, 1 pc.
- Warranty Card, 1 pc.
- Charging Cable, 1 pc.
Product Structure Diagram
Wireless Charging Area
Wireless Charging Indicator
Battery Level Indicator
Product Description
A portable charging device that provides wired or wireless charging for mobile phones, tablets, game consoles, and other digital devices. It features a magnetic suction cup, supports Apple 20W PD fast charging, dual-way Type-C charging, and 15W wireless fast charging. It has a built-in protection system against damage from foreign objects, overcharging, excessive discharge, temperature, and other malfunctions.
Operating Conditions
- Operating Temperature: Non-tropical areas, 0°C to 35°C
- Storage Temperature: 0°C to 40°C
Icon Description
The 5-year icon refers to the 'eco-friendly use period', not the product quality assurance period. Electronic products contain toxic and harmful substances such as lead, mercury, and cadmium. Prolonged use of these products may lead to the leakage or transformation of these toxic and harmful substances, causing environmental pollution or serious injury to people and property damage. The concept of 'eco-friendly use period' means that all electronic products should only be used within this validity period. We assume no responsibility for safety issues related to the use of this product beyond its safe operating life.
Operating Instructions
Wireless Charging:
This product has an automatic wake-up function for wireless charging. Simply place your phone on it to start charging automatically. Due to incompatibility, some phones require activating the wireless charging function via a button. Press the button once, which will light up the battery indicator and start wireless charging. Then, place the device in the charging area. The wireless charging mode will automatically turn off if nothing is placed on the charging area within 30 seconds.
Tips for Wireless Charging
Place the phone on the wireless charging area (as shown in the figure) to start wireless charging. For wireless charging to work, the distance between the charging phone and the power bank must be a maximum of 8 mm. Otherwise, charging will be interrupted, and the phone's position will need to be adjusted.
Statement on Toxic and Hazardous Substances in Electronic Information Products
| Part Description | Toxic or hazardous substances and elements 5 | |||||
|---|---|---|---|---|---|---|
| Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent chromium (Cr VI) | Polybrominated biphenyls (PBB) | Polybrominated diphenyl ethers (PBDE) | |
| PCB | X | O | O | O | O | O |
| Electrode | O | O | O | O | O | O |
| Battery | X | O | O | O | O | O |
| Casing | O | O | O | O | O | O |
This form is compiled in accordance with SJ/T 11364.
O: It indicates that the content of the toxic and harmful substance in all homogeneous materials of the component is below the limit specified in GB/T 26572 standard.
X: The content of toxic and harmful substances in at least one homogeneous material of this part exceeds the limit stipulated in GB/T 26572 standard.
Compliance Information
This equipment complies with the provisions of Directive 2012/19/EU and Directive 2006/66/EU. It is strictly forbidden to dispose of this equipment with ordinary trash. It must be recycled. This symbol indicates that the product shall not be treated as regular domestic trash, and must be delivered to a recycling center that is capable of recycling electronic and electrical equipment.
This equipment complies with the provisions of Directive 2014/53/EU, Directive 2011/65/EU. The full text of the EC Declaration of Conformity can be found on the following website: www.baseus.com
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
FCC ID: 2A482-PPCXM20
Warning: Please follow the safety instructions above, otherwise it will cause fire, electric shock, damage or other injuries.
Manufacturer: Shenzhen Baseus Technology Co., Ltd.
Add: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen
Executive Standard: GB/T 35590
Hotline: +86-4000-712-711 Website: www.baseus.com
Official After-sales E-mail Address: care@baseus.com
Model Number: PB4087Z-POA0
Internal Code: 1000057864
Designed by Baseus
Made in China
