Baseus PicoGo Qi2 Magnetic Bracket Power Bank 5000mAh 20W

Product Information

Product Name: Baseus PicoGo Series Qi2 Magnetic Bracket Power Bank 5000mAh 20W Moon White

Model No.: PPPG-0520S

Part Number: 1100026272

Designed by Baseus

Manufacturer: Shenzhen Baseus Technology Co., Ltd.

Address: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen

Official After-sales E-mail: care@baseus.com

Hotline: +1 800 220 8056 (US)

Website: https://www.baseus.com

Operating Temperature: 0°C to 30°C (32°F to 86°F)

Storage Temperatures: 0°C to 40°C (32°F to 104°F)

Made in China

Social Media: [Facebook] [Instagram] [X] [YouTube] [TikTok]

Note: Printing suppliers are advised to strictly follow Baseus's design drawings. Any necessary adjustments to fonts, graphics, colors, or die-cut sizes must be communicated to and approved by Baseus packaging designers.

Warranty and Support

• ✔️ 24-Month Warranty
• ✔️ Lifetime Tech Support

Contact Us:

• Email: care@baseus.com
• Website: https://www.baseus.com
• Phone: +1 800 220 8056 (US)

Functions of Parts

1. ✔️ 1. Rotating Ring Stand: A stand that can be rotated.
2. ✔️ 2. Wireless Charging Indicator: An indicator light for wireless charging status.
3. ✔️ 3. Battery LED Indicator: LED lights showing the battery level.
4. ✔️ 4. Magnetic Charger: The magnetic surface for attaching and charging devices.
5. ✔️ 5. USB-C Port: Port for charging the power bank or outputting power.
6. ✔️ 6. Power Button: Button to control the power bank's functions.

Charging Instructions

3. Magnetic Charging for iPhone

Place your iPhone onto the power bank. The wireless charging indicator will light up when wireless charging starts. The magnetic attachment ensures proper alignment.

5. Charging Your Devices Using Charging Cables

Connect your devices to the power bank using appropriate charging cables (e.g., USB-C). Charging begins automatically.

Note: When using wired charging, the power bank disables wireless charging by default to maximize charging speed. To enable both wireless and wired charging simultaneously, double-press the power button.

6. Low Current Charging Mode

For devices requiring low current charging (e.g., wireless earbuds), long-press the power button to activate this mode. The battery LED indicator will flash in a loop. Long-press the power button again to exit low current mode.

The power bank will automatically turn off if not used for 2 hours. Short-press the power button to turn it back on.

7. Recharging the Power Bank

Recharge the power bank by connecting a USB-C cable to the USB-C input port and a power source.

8. Specifications

Included Accessories

• Power Bank ×1
• Charging Cable ×1
• Emoji Stickers ×1

Important Safety Instructions

• Store the product in a cool and dry place.
• Do not store in hot or humid environments.
• Use only recommended power supplies/chargers to avoid fire or injury risks.
• Do not disassemble the product; seek qualified service for repairs. Incorrect reassembly can cause fire or injury.
• If not used for a long time, charge and discharge it every three months to prevent battery issues.
• The product may feel warm during charging; this is normal.
• Battery capacity naturally decreases over time.
• Do not clean with harmful chemicals or detergents.
• Avoid misuse, dropping, or excessive force, which can damage the product and potentially cause fire or smoke from a damaged battery.
• When disposing of batteries, keep different electrochemical systems separate.
• CAUTION: Risk of explosion if the battery is replaced with an incorrect type.
• WARNING: Batteries should not be exposed to excessive heat (sun, fire).
• Extremely low air pressure may lead to explosion or leakage of flammable liquid or gas.

Compliance and Disposal

Declaration of Conformity: Shenzhen Baseus Technology Co., Ltd. declares this product complies with Directive 2014/53/EU. The full EU declaration of conformity is available at: https://eu.baseus.com/pages/eu-ro-compliance.

This product complies with the radio interference requirements of the European Community (CE mark). ?

FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation. Changes not expressly approved may void the user's authority to operate the equipment.

This equipment has been tested and found to comply with Class B digital device limits, pursuant to Part 15 of the FCC Rules, designed to provide reasonable protection against harmful interference in residential installations. If interference occurs, users are encouraged to try correcting it by reorienting the antenna, increasing separation, connecting to a different circuit, or consulting a technician.

Radiation Exposure Statement: The product meets general RF exposure requirements and can be used in portable exposure conditions without restriction.

Importer (for FCC matters): BASEUS TECHNOLOGY (US) INC, 421 S BROOKHURST ST SUITE 1312, ANAHEIM, CA 92804, Telephone: +1 45412699.

Disposal Instructions (Korean: 메기지침): Do not discard used batteries carelessly. Do not incinerate or place batteries in fire, as this can cause explosion and fire. Battery disposal methods vary by country and region; dispose of them properly.

Disposal Instructions (French: FR): Prioritize repair or donation of your device. Find collection points at www.quefairedemesdechets.fr. This device and its cables should be deposited at applicable collection points for recycling of electrical and electronic equipment. Follow local rules and do not dispose of with normal household waste.

Disposal Instructions (Spanish: ES): This symbol indicates the product should not be treated as household waste. Hand it over to the applicable collection point for recycling of electrical and electronic equipment. Follow local rules and never dispose of the product and/or batteries with normal household waste.