LINOVISION POE-SWR708GM-8BT
8 Ports Full Gigabit BT90W PoE++ Switch - Quick Guide
Overview
This industrial-grade PoE switch offers 8 Gigabit RJ45 ports with PoE and 4 Gigabit SFP slots. It supports IEEE 802.3af/at/bt standards with up to 90W per port. Designed for harsh environments, it features fanless cooling, wide temperature tolerance (-40°C to 75°C), and dual 48-57V DC power inputs for redundancy. It supports ring network protection, VLAN, QoS, and can be managed via Web, Console, Telnet, or SSH.
Package Contents
- POE-SWR708GM-8BT: The main industrial PoE switch unit.
- Wall Mounting Accessory: Components for mounting the switch on a wall.
- DIN-Rail Mounting Accessory: Components for mounting the switch on a standard DIN rail.
- Connecting line: An RJ45 Ethernet cable for network connections.
- Quick Guide: This document providing setup and configuration information.
Installation
The switch can be mounted using either wall mounting accessories or DIN-rail mounting accessories. The DIN-rail mounting involves attaching the provided brackets to the switch and then clipping it onto a standard DIN rail.
Diagram shows a switch unit being attached to a DIN rail.
Interface
The front panel of the POE-SWR708GM-8BT features various indicators, ports, and controls:
- LED Indicators: PWR (Power), SYS (System Status), PoE (PoE Status), Link/Act (Link/Activity for ports).
- DIP Switches:
- DIP Switch 1: Fast Ring
- DIP Switch 2: SCP (Broadcast storm suppression)
- Console Port: For console management access.
- Ports: 8 x 90W Gigabit PoE Ports, 4 x Gigabit SFP Ports.
- DC Power Input: Two terminals (PWR1, PWR2) for 48-57V DC power input.
- Ground Terminal: For system grounding.
- Relay: A relay output for fault indication.
Connection Diagram
The switch facilitates various network connections:
- Data Center: Connects via Optical Fiber to an SFP switch, providing 1000Mbps data.
- High-Power Demand Site: Connects to a PTZ Camera using IEEE802.3af/at/bt standards, with 1000Mbps data and Power + Data over a network cable.
- Home & Office Site: Connects to a WIFI Access Point or VoIP Phone using 1000Mbps data and Power + Network Cable.
- Equipped with PoE Splitter: Connects to devices like a Non-PoE Camera or LED Fill Light, receiving 1000Mbps data and DC Output from a PoE splitter.
Diagram illustrates the switch connecting to different network devices and sites, showing data and power flow.
Data Sheet
Mechanical Specs
| Dimensions (W*H*D) | 145 x 109 x 62 mm (5.71 x 4.29 x 2.44 in) |
|---|---|
| Weight | 1.01 kg (2.22 lb) |
| Enclosure | Metal |
| Protection Rating | IP40 |
| Installation | Rack-mount/Desktop mount |
Interfaces
| Ethernet Port | 8 * 10/100/1000Base-T RJ45 Ports, 4 * 1000Base-X SFP Slots |
|---|---|
| Power Supply | 48-57 VDC |
| Management port | 1 * Console RJ45 Port |
| Standard | IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x, IEEE802.1X, IEEE802.1q, IEEE802.1p, IEEE802.1d, IEEE802.1w, IEEE802.3ad, IEEE802.3af, IEEE802.3at, IEEE802.3bt |
PoE
| PoE Power Budget | 460 W |
|---|---|
| PoE Outputs | 8 * IEEE 802.3bt PoE++ 90 W Ports (Pin 1/2/7/8-, 3/6/4/5+) |
Switching Features
| Switching Capacity | 24 Gbps |
|---|---|
| Packet Forwarding Rate | 17.86 Mpps |
| MAC Address Table | 8 KB |
| Packet Buffer | 4.1Mbit |
| Jumbo Frame | 10 KByte |
| Watchdog | Support |
Environment
| Operating Temperature | -40°C to 75°C (-40°F to 167°F) |
|---|---|
| Storage Temperature | -40°C to 80°C (-40°F to 176°F) |
| Operating Humidity | 5% to 90% non-condensing |
| Storage Humidity | 0% to 95% non-condensing |
| Surge Protection | Differential mode ±2 KV, Common mode ±6 KV |
| Electrostatic Standard | Contact ±6 KV, Air ±8 KV |
| MTBF | >100,000 hours |
L3 Features
| DHCP | DHCP/DHCPv6 Server |
|---|---|
| Route | IPV4/IPV6 Static Routing, Route Aggregation |
L2 Features
| VLAN | Up to 4,093 VLANs Simultaneously, 802.1Q tag-based VLAN, Port-based VLAN, MAC-based VLAN, Protocol-based VLAN, IP subnet-based VLAN, Voice VLAN, Private VLAN, Guest VLAN, QinQ/Selective-QinQ/Flexible QinQ, GVRP/GMRP |
|---|---|
| IGMP | IGMP Snooping V1/V2/V3, IGMP Proxy |
| Loop Detection | Loopback Detection of STP, ERPS |
| Spanning Tree Protocol | STP/RSTP/MSTP, MSTP 64 instance, BPDU Guard/Root Guard/BPDU Tunnel |
| PoE Management | PoE On/Off Control, PoE Budget Config, PD Alive Detection, Time Schedule PoE |
QoS
| Priority Levels | 8 Hardware queues |
|---|---|
| Scheduling | SP/WRR/WDRR Queue Scheduling Algorithm |
| Class of Services | Based on Port, Based on IEEE 802.1p VLAN Priority, IPv4/IPv6 IP/DSCP precedence |
Security
| IEEE 802.1X | Port access control, Mac-address access control |
|---|---|
| RADIUS/TACACS+ | Standard Protocol |
| Storm Control | Defend Broadcast, Multicast & Unknown unicast |
| DoS Prevention | Deny DoS Attack |
| SSL | OpenSSL 1.1.0 |
| ARP | Static ARP, ARP Scanning Prevention, ARP Spoofing Prevention, ARP Guard, Gratuitous ARP, Dynamic ARP Inspection, ARP Quantity Control |
| ACL | IP-based ACL, MAC-based ACL, Time-based ACL, VLAN-based ACL, User defined ACL |
Management
| Web GUI | Easy Browser-based Device Configuration |
|---|---|
| SNMP | SNMP V1/V2c/V3, SNMP Trap |
| CLOUD Management | LINOVISION RemoteMonit Platform |
| CLI management | Console/Telnet /SSH |
| File Management | HTTP/FTP/TFTP |
Configuration
- Connect the POE-SWR708GM-8BT to a power source and to your computer using an RJ45 cable.
- Open your network connections and modify the settings for the network interface connected to the POE-SWR708GM-8BT. Set the IP configuration to manual and assign an IP address like '192.168.2.2'.
- Open your web browser and navigate to the default IP address of the POE-SWR708GM-8BT, which is "192.168.2.1". Log in using the default username "admin" and password "admin".
- On the sidebar, navigate to "System Settings" and then "IP Settings". Set "Auto Obtain IP" to "Enable" and click "Apply" to save the settings.
- Connect the POE-SWR708GM-8BT to your router/gateway with an RJ45 cable. Consult your network administrator or the router's configuration page to obtain the new IP address of the POE-SWR708GM-8BT.
- Save all your settings in the top right corner of the web page.
Screenshot shows the web interface for IP configuration, with fields for VLAN Interface, IP Mode, IP Address, and Netmask, and options to apply settings.
