8 Ports Full Gigabit BT90W PoE++ Switch

Quick Guide (POE-SWR708GM-8BT)

Overview

This industrial-grade PoE switch offers 8 Gigabit RJ45 ports with PoE and 4 Gigabit SFP slots. It supports IEEE 802.3af/at/bt standards with up to 90W per port. Designed for harsh environments, it features fanless cooling, wide temperature tolerance (-40°C to 75°C), and dual 48-57V DC power inputs for redundancy. It supports ring network protection, VLAN, QoS, and can be managed via Web, Console, Telnet, or SSH.

Package Contents

POE-SWR708GM-8BT: The main 8-port Gigabit PoE++ switch unit.
Wall Mounting Accessory: Components for mounting the switch on a wall.
DIN-Rail Mounting Accessory: Components for mounting the switch on a DIN rail.
Connecting line: An RJ45 Ethernet cable.
Quick Guide: This document.

Installation

DIN-Rail Mounting

Diagram shows the switch being mounted onto a DIN rail. The process involves attaching the DIN-rail mounting accessory to the switch and then clipping it onto a standard DIN rail.

Wall Mounting

Diagram shows the switch being mounted on a wall using wall mounting brackets.

Interface

Front Panel

The front panel features:

LED Indicators: [Power LED] (PWR), [System LED] (SYS), [Link/Act LED] (DATAOLNKJACT).
DIP Switches: [DIP Switch 1] (Fast Ring), [DIP Switch 2] (SCP - Broadcast storm suppression).
Console Port: For console management.
8 x 90W Gigabit PoE Ports: RJ45 ports supporting PoE++.
4 x Gigabit SFP Ports: For fiber optic connections.

Rear Panel

The rear panel features:

DC Power Input: [Power Input 1] (PWR1) and [Power Input 2] (PWR2), supporting 48-57V DC (with PoE Out) or 12-55V DC (Ethernet Switch Only).
Ground Terminal: For safety grounding.
Relay: For fault reporting.

Connection Diagram

This diagram illustrates various connection scenarios:

Remote Site: Connects to "RemoteMonit" with "Cloud Management Supported" via solar panels.
Data Center: Connects to an "SFP switch" using "1000Mbps Data" over "Optical Fiber".
High-Power Demand Site: Connects to a "PTZ Camera" using "IEEE802.3 af/at/bt" and "1000Mbps Data" with "Power + Data" via "Network Cable".
Home & Office Site: Connects to a "WIFI Access Point" and "VoIP Phone" using "Power + Data" via "Network Cable".
Equipped with PoE Splitter: Connects to a "Non-PoE Camera" and "LED Fill Light" using "1000Mbps Data" with "DC Output" from a "POE-Splitter". The switch provides "IEEE802.3 af/at/bt" power.

Data Sheet

Mechanical Specs

Dimensions (WHD)	145 x 109 x 62 mm (5.71 x 4.29 x 2.44 in)
Weight	1.01 kg (2.22 lb)
Enclosure	Metal
Protection Rating	IP40
Installation	Rack-mount/Desktop mount

Interfaces

Ethernet Port	8 * 10/100/1000Base-T RJ45 Ports, 4 * 1000Base-X SFP Slots
Power Supply	48-57 VDC
Management port	1 * Console RJ45 Port
Standard	IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3x, IEEE802.1X, IEEE802.1q, IEEE802.1p, IEEE802.1d, IEEE802.1w, IEEE802.3ad, IEEE802.3af, IEEE802.3at, IEEE802.3bt

PoE

PoE Power Budget	460 W
PoE Outputs	8 * IEEE 802.3bt PoE++ 90 W Ports (Pin 1/2/7/8-, 3/6/4/5+)

Switching Features

Switching Capacity	24 Gbps
Packet Forwarding Rate	17.86 Mpps
MAC Address Table	8 KB
Packet Buffer	4.1Mbit
Jumbo Frame	10 KByte
Watchdog	Support

Environment

Operating Temperature	-40°C to 75°C (-40°F to 167°F)
Storage Temperature	-40°C to 80°C (-40°F to 176°F)
Operating Humidity	5% to 90% non-condensing
Storage Humidity	0% to 95% non-condensing
Surge Protection	Differential mode ±2 KV, Common mode ±6 KV
Electrostatic Standard	Contact ±6 KV, Air ±8 KV
MTBF	>100,000 hours

L3 Features

DHCP	DHCP/DHCPv6 Server
Route	IPV4/IPV6 Static Routing, Route Aggregation

L2 Features

VLAN	Up to 4,093 VLANs Simultaneously, 802.1Q tag-based VLAN, Port-based VLAN, MAC-based VLAN, Protocol-based VLAN, IP subnet-based VLAN, Voice VLAN, Private VLAN, Guest VLAN, QinQ/Selective-QinQ/Flexible QinQ, GVRP/GMRP
IGMP	IGMP Snooping V1/V2/V3, IGMP Proxy
Loop Detection	Loopback Detection of STP, ERPS
Spanning Tree Protocol	STP/RSTP/MSTP, MSTP 64 instance, BPDU Guard/Root Guard/BPDU Tunnel
PoE Management	PoE On/Off Control, PoE Budget Config, PD Alive Detection, Time Schedule PoE

QoS

Priority Levels	8 Hardware queues
Scheduling	SP/WRR/WDRR Queue Scheduling Algorithm

Class of Services

Based on Port, Based on IEEE 802.1p VLAN Priority, IPv4/IPv6 IP/DSCP precedence

Security

IEEE 802.1X	Port access control, Mac-address access control
RADIUS/TACACS+	Standard Protocol
Storm Control	Defend Broadcast, Multicast & Unknown unicast
DoS Prevention	Deny DoS Attack
SSL	OpenSSL 1.1.0
ARP	Static ARP, ARP Scanning Prevention, ARP Spoofing Prevention, ARP Guard, Gratuitous ARP, Dynamic ARP Inspection, ARP Quantity Control
ACL	IP-based ACL, MAC-based ACL, Time-based ACL, VLAN-based ACL, User defined ACL

Management

Web GUI	Easy Browser-based Device Configuration
SNMP	SNMP V1/V2c/V3, SNMP Trap
CLOUD Management	LINOVISION RemoteMonit Platform
CLI management	Console/Telnet /SSH
File Management	HTTP/FTP/TFTP

Configuration

Connect the POE-SWR708GM-8BT to a power source and use an RJ45 cable to connect it to your computer.
Open your network connections and modify the settings for the network interface corresponding to the POE-SWR708GM-8BT. Set the IP configuration to manual and assign the IP address to '192.168.2.2'.
Open your browser and navigate to the default IP address of the POE-SWR708GM-8BT, "192.168.2.1", and log in with the default username "admin" and password "admin".
On the sidebar, select "System Settings" -> "IP Settings". Set "Auto Obtain IP" to "Enable" and click "Apply" to apply the settings. The interface shows a preview of IPv4 configuration with fields for IP Mode (Dynamic/Static IP), IP Address, and Netmask.
Connect the POE-SWR708GM-8BT to the router/gateway with an RJ45 cable. Consult your network administrator or go to the router's configuration page to obtain the new IP address of the POE-SWR708GM-8BT.
Save all your settings in the top right corner of the web page.

	Linovision PoE-SWR708GM-8BT Industrial PoE++ Switch - Features & Specifications Comprehensive details on the Linovision PoE-SWR708GM-8BT, an 8-port Gigabit L2+ managed industrial PoE++ switch with a 460W power budget, featuring advanced L2/L3 functions, robust industrial design, and wide operating temperature range.
	LINOVISION POE-SWR708GM-8BT Quick Guide: 8-Port Gigabit PoE++ Switch This quick guide provides essential information for the LINOVISION POE-SWR708GM-8BT, an industrial-grade 8-port full Gigabit BT90W PoE++ switch. Learn about its features, package contents, installation, interface details, connection diagrams, data sheet specifications, and basic configuration steps for reliable network deployment.
	Linovision POE-SW508G: High Power Industrial PoE Switch Linovision POE-SW508G is an 8-port 10/100/1000Mbps industrial PoE switch with 2 SFP uplinks. It features ultra-high power PoE, wide temperature operation, surge protection, and a robust IP40 metal enclosure, making it ideal for harsh industrial environments.
	Linovision POE-SW508G2: 8-Port Industrial Gigabit PoE Switch with 4x90W PoE++ Ports Explore the Linovision POE-SW508G2, an industrial 8-port full Gigabit PoE switch featuring 4x90W PoE++ ports, 2x Gigabit SFP uplinks, wide temperature operation, and robust surge/ESD protection. Ideal for demanding network applications.
	Linovision POE-SW508G2 Industrial Full Gigabit PoE Switch Quick Guide Quick guide for the Linovision POE-SW508G2, an 8-port industrial full gigabit unmanaged PoE switch with 2 SFP uplinks and 4 BT 90W PoE ports. Includes installation, interface, and technical specifications.
	LINOVISION POE-SW308G-4BT 8-Port Gigabit PoE++ Switch Discover the LINOVISION POE-SW308G-4BT, an 8-port unmanaged Gigabit PoE++ switch featuring IEEE 802.3bt standard with up to 90W per port and a 120W total budget. Ideal for high-power PoE applications in homes and businesses, it offers long-range transmission and robust protection.
	Linovision POE-SW304G-4BT: 4-Port Gigabit PoE++ Switch Datasheet Detailed specifications and features of the Linovision POE-SW304G-4BT, a 4-port Gigabit IEEE 802.3bt PoE++ unmanaged switch with high power output and robust design, suitable for demanding network applications.
	LINOVISION POE-SW508G User Manual: 8 Ports Industrial PoE Switch User's manual for the LINOVISION POE-SW508G, an 8-port industrial 802.3bt PoE switch. Features include wide temperature operation, fiber uplink options, and detailed technical specifications for network deployment.