Assembling Instructions: Rocking Chair
If you have any questions, please feel free to contact us. Email: lowesteam@aminalife.com
Parts List
| Part | Description | Quantity |
|---|---|---|
| A | Base Frame | 1 |
| B | Seat Frame | 1 |
| C | Back Support | 1 |
| D | Armrest | 1 |
| E | Cushion | 1 |
| F | Hardware Pack | 1 |
| V | M6*30 Screw | 4 (+1 spare) |
| W | M6*35 Screw | 2 (+1 spare) |
| X | M6*40 Screw | 4 (+1 spare) |
| Y | Washer | 10 (+2 spare) |
| Z | Nut | 1 |
Estimated assembly time: 30 minutes
Maximum weight capacity: 160kg [weight-symbol]
Assembly Steps
Step 01
Attach the seat frame (B) to the base frame (A) using screws (W) and washers (Y). Secure with nuts (Z).
Visual Description: Diagram shows part B being attached to part A with screws W and washers Y, and nuts Z. Screws V and washers Y are also shown for later steps.
Step 02
Attach the back support (C) to the assembled base and seat frame using screws (V) and washers (Y).
Visual Description: Diagram shows part C being attached to the structure from Step 01 using screws V and washers Y.
Step 03
Attach the armrests (D) to the rocking chair frame using screws (X) and washers (Y).
Visual Description: Diagram shows armrests (D) being attached to the sides of the rocking chair frame using screws X and washers Y.
Final Step
Place the cushion (E) onto the assembled rocking chair frame. The rocking chair is now ready for use.
Visual Description: Diagram shows the completed rocking chair with the cushion (E) placed on the seat.
