About This Guide
This document provides essential assembly instructions for the Living Spaces Sedona Junior Loft Bed, which includes a Twin Caster Bed and a Junior Stair Chest. Please review all parts and instructions before beginning assembly to ensure a smooth and safe setup process.
Key Components and Tools
Ensure you have all the necessary parts listed in the manual and the required tools, which typically include a 7/16" Wrench or Socket Wrench and a Phillips Head Screwdriver. An electric driver with a 7/16" socket is recommended for faster assembly.
Assembly Steps Overview
The assembly process involves connecting bed rails, mattress supports, and guard rails to the end assemblies using lag bolts and washers. Slats are then secured to provide mattress support. The stair chest can be used as a freestanding unit or attached to the bunk bed using the provided angle brackets and screws.
Important Safety Information
Safety Warnings:
- Always use the recommended mattress size and support to prevent entrapment or falls.
- Ensure the mattress surface is at least five inches below the upper edge of guardrails.
- Children under six years of age should not use the upper bunk.
- Periodically check all components for proper position, damage, and tightness of connectors.
- Do not allow horseplay or jumping on the bed.
- Only one person should be on the upper bunk at a time.
- Use the ladder or bed end for entering and leaving the upper bunk.
- Do not use substitute parts; contact Living Spaces for replacements.
- If placing the bed next to a wall, ensure the guardrail is against the wall to prevent entrapment.
- Always use guardrails on both long sides of the upper bunk.
- Water or sleep flotation mattresses are prohibited.
- Never attach or hang items not designed for the bunk bed, such as belts or jump ropes.
Mattress and Foundation Size:
The Twin bed requires a mattress 37"-39" wide and 74"-75" long. The Full bed requires a mattress 52"-54" wide and 74"-75" long. The combined thickness of the mattress and foundation must not exceed 10". Ensure at least 5" from the mattress sleeping surface to the top edge of the guardrail.
Contact Information
For any missing parts or questions regarding assembly, please contact Living Spaces.
