NOMA TRUE HEPA PERSONAL AIR PURIFIER
Product Number: 043-8657-8
User Manual
Safety Information and Precautions
Please inspect the unit before each use. Remove any damaged or abnormally operating parts immediately.
- Do not block or cover air inlet and outlet ports as airflow is required.
- Use within the rated voltage range.
- Before using the product, unscrew the aluminum air inlet housing, take out the filter, remove the plastic bag covering the filter, and then put the filter back.
- Unplug the power cord when cleaning, maintaining, or replacing the filter.
- It is recommended to use in the car.
- Disconnect from power when not using the product for a long time.
- Do not disassemble, modify, or repair this product. If it needs maintenance, seek professional assistance.
- Do not use solvents or chemicals to clean the product. Do not spray aerosols on the product.
- When using in a car, do not place the power supply device near the door or the handrail shaft.
- Do not place anything on the product.
- Do not put the product in an area where car airbags might deploy.
- Do not allow anyone with mental or sensory disabilities or inexperience with the product to operate it.
- The filter cannot be washed; it must be replaced when it has expired.
- Children should not be allowed to tamper with the controls or play with the product.
- To reduce the risk of electric shock, do not expose the unit or flexible cord to moisture in any way.
- The product is not waterproof; it is only for indoor use.
Product Specifications
Overview
The air purifier is a cylindrical device with the following numbered components:
- 1. Power switch
- 2. Handle
- 3. Snap button
- 4. USB socket
- 5. Aluminum air inlet housing
- 6. Air outlet
- 7. Filter
- 8. Non-slip gasket
- 9. USB cable
- 10. 5V, 2A USB AC adaptor
Package Contents
- One air purifier
- One USB cable
- One USB AC adaptor
Specifications Table
Product Name | Product Model | Product Size (D x H) | Input | Max. noise | Airflow |
---|---|---|---|---|---|
True HEPA Personal Air Purifier | 043-8657-8 | 3 x 8 1/8" (7.63 x 20.6 cm) | DC 5 V 3 W | 50 dBA | 424 cu. ft./h (12 m³/h) |
Installation Guide
Overview
- Take the product out of the box and unscrew the aluminum air inlet housing.
- Remove the filter and the plastic bag from the filter.
- Replace the filter and tighten the aluminum air inlet housing.
- Insert the micro USB into the USB socket and plug the other end of the cable into the 5V 2A USB AC adaptor, then plug the adaptor into the power supply.
Snap Button
The snap button can be opened for hanging.
Filter Life Reminder and Reset
Filter Life Reminder: When the air purifier turns on, if the power indicator light flashes, it means the cumulative use of the filter has reached 1000 hours and the filter life has expired. It must be replaced with a new filter.
Filter Reset: After changing the filter, plug the purifier in and press the power switch for approximately three seconds. A beep sound will indicate that the filter has been reset successfully.
Operation
When the purifier is connected to power, it will emit a beep sound. Each touch of the power switch will cause a beep and cycle the air purifier through the different fan speeds: low, medium, high, and off. The power button will illuminate to a corresponding brightness. Select the speed suitable for your application.
Cleaning and Maintenance
- Unplug the air purifier before cleaning.
- Do not wet or soak the unit.
- Clean only with a soft, slightly damp cloth and allow it to dry before using it again.
- Do not use abrasive, corrosive, or flammable cleaners (such as bleach or alcohol) to clean the air purifier.
- Regularly use a soft, dry cloth to wipe the air inlet.
- Regularly use a soft, dry cloth or vacuum cleaner to remove accumulated dust in the air outlet.
- Only qualified service personnel may perform repairs.
- Store the unit in a cool, dry place when it is not in use. Avoid high humidity.
Warranty and Compliance
This product carries a one (1) year warranty against defects in workmanship and materials (the filter is not covered by the warranty). NOMA Canada agrees to have any defective products replaced free of charge, within the stated warranty period, when returned by the original purchaser with proof of purchase. This product is not guaranteed against wear or breakage due to misuse and/or abuse.
Important: Change the filter every 3–6 months depending on the dirt level of the filter.
Compliance: CAN ICES-3(B)/NMB-3(B)
WARNING: Cancer and Reproductive Harm. Visit www.P65Warnings.ca.gov.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and (2) this device must accept any interference received, including interference that may cause undesired operation.
Manufacturer/Distributor Information:
Golden Viking Sports, LLC.
Address: Sumner, WA, USA 98390.
Website: www.noma.com
Customer Service:
United States: support@noma.zendesk.com
Canada: TOLL FREE: 1-866-827-4985
Modification Warning: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
FCC Test Results: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.