NOMA True HEPA Air Purifier User Manual

Product Numbers: 043-7340-6 (Medium), 043-7341-4 (Large)

01. Know Your Air Purifier

Features

Diagram showing the top and front of the air purifier. Key components labeled: 01. AIR OUTPUT VENT (top), 02. AIR QUALITY INDICATOR RING (around the control panel), 03. CONTROL PANEL (front center), 04. AIR INPUT GRILL (lower front), 05. AC PLUG (rear).

Components

Diagram showing the internal components and exterior. Key components labeled: 01. AIR QUALITY SENSOR DOOR (located behind the fan housing), 02. FAN HOUSING (top section that can be removed), 03. TRUE HEPA FILTER (main filter inside), 04. PRE-FILTER (outer layer on the HEPA filter), 05. AIR INTAKE GRILL (lower front).

02. Operating Instructions

Setup Directions

1. Place: Position the air purifier on the floor, ensuring the air intake grill is unobstructed.
2. Power: Plug in the air purifier and press the Power Button once. The unit will start immediately on the AUTO setting.
3. Sense: The air quality indicator ring will illuminate and begin detecting air quality. It shows blue for great quality, pink for average, and red for poor quality.
4. Set: Select optimal settings by referring to the Controls and Settings section.
5. Relax: Enjoy the quiet operation.

Controls and Settings

01. Power Button: Press once to turn on the unit, which defaults to the AUTO setting.

02. Fan Speed Button: Cycle through AUTO, Low, Medium, or High fan speeds.

a) AUTO Fan Speed: The fan speed automatically adjusts based on the air quality indicator ring. Red ring triggers High speed; blue ring triggers Low speed.

03. Timer Button: Set the purification duration for 2, 4, or 8 hours.

04. Ionizer Switch: Turn on the optional Ionizer to help trap airborne particles more effectively.

05. Filter Replacement Indicator: Illuminates when the True HEPA filter needs replacement. Reset by pressing and holding the Power and Timer buttons for 2 seconds after replacement.

06. Night Mode: Press and hold the Power Button for 2 seconds to dim indicator lights. Press and hold again to exit Night Mode.

03. Cleaning Instructions

General Maintenance

1. Ensure the air purifier is off and unplugged.
2. Wipe the unit with a soft, lightly dampened cloth. Avoid getting the fan housing too wet.
3. Dust the air output vent and air intake grill with a soft brush, then wipe the interior with a dry, soft cloth.
4. Refer to Pre-Filter Maintenance for pre-filter cleaning.
5. Replace the True HEPA filter when the Filter Replacement Indicator lights up. Do not wash the True HEPA filter.

Pre-Filter Maintenance

1. Ensure the air purifier is off and unplugged.
2. Follow the first 2 steps of Filter Replacement (removing the fan housing and filter).
3. Vacuum the pre-filter or machine wash it in cool water and dry on a gentle cycle.
4. Ensure the pre-filter is dry before reattaching it to the True HEPA filter.

Air Quality Sensor Maintenance

1. Open the air quality sensor door located behind the fan housing.
2. Gently wipe the sensor with a dry cotton swab or soft cloth.
3. Close the sensor door to prevent moisture exposure.

04. Filter Replacement

True HEPA Filter Replacement

The True HEPA filter should be replaced every 3-6 months, depending on air quality and usage.

1. Rotate the fan housing counter-clockwise and lift it off the air intake grill.
2. Remove the filter from the air intake grill. Remove the pre-filter from the True HEPA filter.
3. Dispose of the used True HEPA filter and install a new one. Reattach the pre-filter to the new True HEPA filter and place it back into the air intake grill.
4. Replace the fan housing onto the air intake grill, rotating clockwise until it locks. Reset the Filter Replacement Indicator by pressing and holding the Power and Timer buttons for 2 seconds.

05. Product Specifications

Overview

06. FAQs

Frequently Asked Questions

Q: What does the Clean Air Delivery Rate (CADR) mean?
A: CADR is a measure of the volume of air processed by the purifier. A higher CADR indicates a more powerful air purifier.

Q: What does a pre-filter do?
A: It extends the life of the True HEPA filter by initially filtering out larger particles like mold and pollen.

Q: What does an Ionizer do?
A: Ionizers electrically charge air molecules, helping the purifier trap airborne particles more efficiently.

Q: Will my settings be saved if I turn off my air purifier?
A: Yes, if kept plugged in, the purifier will return to its last settings. If unplugged, it will revert to the default AUTO setting upon restart.

07. Safety / Cautions

Safety Concerns

• Ensure all air openings are not restricted or covered. Do not place anything on top of the unit.
• Never drop or insert any object into any openings.
• Do not place the air purifier near heat sources like stoves, radiators, or heaters. Locate it on an inside wall near an electrical outlet.
• Do not operate if the power cord is damaged, or if the unit has been dropped, damaged, or malfunctions. Return it to an authorized service facility for examination or repair.
• Do not attempt to repair or adjust any electrical or mechanical functions. Doing so voids the warranty. The unit contains no user-serviceable parts; all servicing must be performed by qualified personnel.
• To avoid fire or shock hazard, plug the air purifier directly into a 120V AC electrical outlet.
• To avoid fire hazard, never place the cord under rugs or near heat registers.
• Do not allow children to handle the air purifier. Supervision is required when placed in a room with children.
• Use the air purifier only for intended household use as described in this manual. Other uses not recommended by the manufacturer may cause fire, electric shock, or injury. Use of attachments not recommended or sold by the manufacturer may cause hazards.
• Do not use outdoors.
• Unplug the air purifier when not in use. Pull the plug, not the cord.
• This air purifier requires maintenance to operate efficiently. Refer to Cleaning and Maintenance procedures.
• Never clean the air purifier while it is plugged in. Do not wash the unit under running water.
• Do not plug in the cord with wet hands; electric shock could result.
• This product complies with the maximum allowable concentration of ozone of 0.050 parts per million by volume (PPMV) in a 24-hour period. Health Canada Guideline 2010 recommends a maximum exposure limit (8-hour average) of 0.020 PPMV or less in a sealed, controlled room (approx. 30 m3).

08. Troubleshooting

Common Problems

09. Warranty & Disposal

Environmentally Friendly

2 YEAR LIMITED WARRANTY
This NOMA product carries a 2-year warranty against defects in workmanship and materials. Noma Canada will replace defective parts free of charge within the warranty period upon return with proof of purchase. This warranty does not cover wear or breakage due to misuse or abuse.

Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. CAN ICES-003/NMB-003.

Disposal: You can help protect the environment! Please respect local regulations. Dispose of non-working electrical units at an appropriate waste disposal center.