isinwheel S9MAX Electric Scooter User Manual

Quick Start

Step 1: Close the latch correctly until you hear a click. Ensure the latch is securely closed.

Step 2: Insert the 4 screws into the holes, then tighten each one.

Tips

A) Folding Mechanism Adjustment: If the folding mechanism is too loose or too tight, adjust the silver screw to make it slightly higher or shorter.

B) Rear Brake/Suspension Noise: If you hear noise from the rear disc brake or rear suspension, please email support@isinwheel.com for assistance.

C) Mobile App: Download the "isinwheel" app from the App Store (iPhone) or Google Play (Android phone) for more information and features.

Package Contents

When unboxing your S9MAX electric scooter, please verify that the below items are included in the package. If anything is missing or damaged, please contact isinwheel customer service for support: support@isinwheel.com

• 1 x Charger
• 4 x Screws
• 1 x Allen Wrench

Product Overview

The isinwheel S9MAX electric scooter includes the following components:

• Handlebar
• Display
• Brake Lever
• Turn Indicator Light
• Folding Clip
• Folding Latch
• Front Light
• Platform
• Kickstand
• Disc Brake

Control Panel

The control panel features:

• Power Button: Click to turn on. Long press to turn off.
• Battery Indicator: The power level is shown by five battery bars on the control panel.
• Light: Turn the front light on/off with a single click.
• Mode: Double-click the power button to switch speed mode.
• Cruise Control: Keep the same speed for 5 seconds; it will beep and activate cruise control.
• Lock Indicator: The scooter can be locked and unlocked via the isinwheel app.

Tips for Starting

When the scooter starts to coast, place both feet on the deck and press the accelerator. The accelerator initiates once the coasting speed exceeds 3 mph. Alternatively, connect the "isinwheel" app and enable the zero start function.

Charging

Your scooter will be fully charged when the LED light on the charger changes from red to green. The scooter has charging protection and will automatically cut off charging when fully charged. It is not recommended to charge your scooter for more than 24 hours at one time. Do not connect the charger if the charging port is wet. Keep the charging port closed when not charging. Note: The scooter cannot be turned on during the charging period.

First Ride

Download the "isinwheel" app from the App Store (iPhone) or Google Play (Android phone) for more information and functions.

1. Open the APP and enter the main page, then click Sign Up.
2. Select your country and enter your email address.
3. Find the verification code sent to your mailbox and fill it in.
4. Set a password for your account.
5. Account registration is complete; start your riding experience immediately.

Riding Basics

Safety First: Wear helmets and knee pads in case of falls and injuries when learning to ride the scooter.

1. Turn the power on and check the electricity indicator.
2. Stand on the deck with one foot and propel yourself with the other foot.
3. When the scooter starts to coast, place both feet on the deck and press the accelerator (initiates once coasting speed exceeds 3 mph).
4. Release the accelerator for the kinetic energy recovery system (KERS) to brake slowly. Squeeze the brake lever for a sudden brake.
5. Tilt your body in the steering direction as you turn, and slowly turn the handlebar.

Riding Notice

The isinwheel S9MAX electric scooter is a leisure device. However, in public areas, it is considered a vehicle and subject to any risks faced by vehicles. For your safety, please follow instructions in this manual and traffic laws and regulations set forth by government and regulatory agencies.

• Respect pedestrians' Right of Way. Avoid startling them, especially children. When riding behind pedestrians, ring your bell to alert them and pass on their left (applicable to countries where vehicles drive on the right). When crossing pedestrian areas, keep to the right at a low speed or dismount.
• Closely follow the safety instructions in this manual. isinwheel shall not be liable for any financial losses, physical injuries, accidents, legal disputes, or other conflicts resulting from actions that violate user instructions.
• Check the scooter before every use. If you notice loose parts, low battery alerts, excessive wear, strange sounds, malfunctions, or other abnormal conditions, stop riding.
• WARNING - Risk of Fire - No User Serviceable Parts.

Folding and Carrying

Ensure the scooter is turned off. To fold, unlock the folding mechanism, and bend the handlebar stem to hook the buckle on the rear fender. To unfold, press the bell trigger to release from the buckle, erect the handlebar, and lock the folding structure.

Disc Brake Adjustment

To adjust the disc brake sensitivity:

You need the Allen wrench to loosen the screw on the rocker.

• When the disc brake is too sensitive, rotate the disc brake rocker down a bit. Then, reinstall the screw back to the brake cable core to tighten.
• When the disc brake cannot stop, rotate the disc brake rocker up a bit. Then, reinstall the screw back to the brake cable core to tighten.

Notice: The disc brake may squeak when in use until it is broken in. This is normal and does not affect the brake's function or performance.

To remove the disc brake noise:

First, make sure the scooter is turned off. For easier operation, place the scooter on the desk.

• Loosen two screws on the pump (not the screw on the rocker).
• Adjust the position of the disc brake pump to ensure that the brake disc is in the middle of the two brake pads.
• Ensure the brake disc and brake pad do not touch each other.
• Hold the disk brake pump in the desired position, then retighten the screws to the pump.

Daily Care and Maintenance

Cleaning and Storage

If you see stains on the scooter's body, wipe them off with a damp cloth. If the stains won't scrub off, put on some toothpaste, and brush them with a toothbrush, then wipe them off with a damp cloth.

Notes:

• Do not clean the scooter with alcohol, gasoline, kerosene, or other corrosive and volatile chemical solvents to prevent damage.
• Do not wash the board with a high-pressure water spray. During cleaning, ensure the scooter is turned off, the charging cable is unplugged, and the rubber flap is closed, as water leakage may result in electric shock or other major problems. When the scooter is not in use, keep it indoors where it is dry and cool.
• Do not put it outdoors for a long time. Excessive sunlight, overheating, and overcooling accelerate the battery pack's lifespan.

Battery Maintenance

1. Use original battery packs; use of other models or brands may bring about safety issues.
2. Do not touch the contacts. Do not dismantle or puncture the casing. Keep the contacts away from metal objects to prevent short circuits, which may result in battery damage or even injuries and deaths.
3. Use the original power adapter to avoid potential damage or fire.
4. Mishandling of used batteries may cause tremendous harm to the environment. To protect the natural environment, please follow local regulations to properly dispose of used batteries.
5. After every use, fully charge the battery to prolong its lifespan.

Storage and Disposal

1. Please try to store the scooter in a cool and dry place between 14°F and 104°F. In extremely humid environments, the interior of the scooter may suffer condensation or even water accumulation, which may damage the battery rapidly. Devices are not intended for use at elevations greater than 2000 m above sea level. Prolonged exposure to UV Rays, Rain, and the Elements May Damage the Enclosure Materials. Store Indoors When Not in Use.
2. In daily use, try to avoid recharging the scooter after completely exhausting the battery. If the battery is low, charge it as soon as possible.
3. Please charge the scooter every other month to preserve the battery.

Specifications

(1) The height of the body: Distance from the ground to the highest end of the body.

(2) Description of the battery life: It is measured under the condition of full charge, a load of 150 lb (68kg), at 77°F (24°C), on a flat road without wind, and at a speed of 9.3 mph. The real battery life will differ with different factors of the load, humidity, wind speed, and operation habits.

(3) The maximum allowable weight shall be kept within 264 lb (120kg) (driver and objects included) in any case. Consider an extra weight of the clothes or other accessories with us during the trip and the gravity generated by speed; the scooter will not support it if this load limit is exceeded.

Question & Answer

1. What if the E-Scooter arrived with a missing accessory or broken part?
   A: Please take a photo and send it to the isinwheel support team via email: support@isinwheel.com. The isinwheel support team will reply soon and arrange for the correct accessory or part replacement.
2. Is the tire replaceable and how to replace the tire?
   A: Yes, the tire is replaceable. Please contact the isinwheel support team for more information or search for the video "How to replace the tire" on YouTube.
3. What if the rear disc brake of the scooter doesn't work well?
   A: You may please contact us for instructions on brake adjusting, or search "How to adjust rear brake of scooter" on YouTube for a tutorial video as well.
4. What should I do when I hear an unusual noise coming from the rear wheel?
   A: It usually means your disc brake is tilted and causing friction noise. Please refer to the Disc Brake Adjustment page. If you still have a problem, please contact us for help.
5. Why the screen returns an error code?
   A: If you see any error code below, please contact the isinwheel support team to remove the error code.

Contact Us

Contact us if you experience issues relating to riding, maintenance, safety, or errors/faults with your isinwheel S9MAX electric scooter.

• E-mail Service: support@isinwheel.com
• Website: www.isinwheel.eu