Introduction
This document details the electrical installation and network connectivity for the Airmaster AM 950 C and AM 950 F units. Installation is divided into two phases: electrical installation and network connection (covered in this guide), and the physical mounting of the unit (refer to the mounting guide).
This guide is intended for trained personnel. For further information, please visit the Airmaster website.
Safety Information
Adherence to the instructions marked with warning symbols is crucial to prevent personal injury or material damage. Always follow safety precautions, including the use of personal protective equipment such as safety shoes.
WARNING: Electrical installation must only be performed by an authorized electrician or Airmaster A/S. Ensure power is disconnected before any work.
CAUTION: Do not operate the unit without the specified filters installed.
Product Identification
The Airmaster AM 950 C (Article No. 9000950601) is a ceiling or wall-mounted decentralized ventilation unit. The AM 950 F (Article No. 9600900701) is a floor-standing decentralized ventilation unit.
Key Features & Options
The AM 950 series offers various options to enhance functionality, including:
- Electric heating elements
- Condensate pump
- CO2 sensors
- TVOC sensors
- Energy meters
- Network connectivity options (Airlinq® Online, MODBUS RTU RS485, BACnet™™ /IP, BACnet™™ MS/TP)
Refer to the product datasheet for detailed specifications and further information.
System Integration
The units can be integrated into various building management systems (BMS) and network solutions, providing advanced control and monitoring capabilities.
