Eurolite Dynamic Fog 700 Fog Machine

Introduction

Welcome to Eurolite! Thank you for choosing one of our products. Eurolite is your connection to the world of show with an unparalleled variety of products, both for professionals and beginners.

If you follow the instructions given in this manual, we are sure that you will enjoy this product for a long period of time. This user manual will show you how to install, set up, and operate your new Eurolite product.

Users of this product are recommended to carefully read all warnings in order to protect yourself and others from damage. Please keep this manual for future needs and pass it on to further owners.

Product Features

• Compact fog machine with high output volume: 230 m³/min.
• Ideal for accentuating light and laser beams.
• Concentrated and steady fog output.
• Control via integrated DMX interface.
• Manual activation via supplied cable remote control.
• Temperature control via thermo switch.
• Fan grille with blue LED illumination, switchable.
• Operates on standard water-based fluid.
• Removable tank with level indication.
• Metal housing with movable mounting bracket and safety eyelet.

The Eurolite Dynamic Fog 700 is a compact fog machine designed for professional event technology. It features a high output volume and can be controlled via DMX or a cable remote control. The machine is housed in a durable metal casing and includes a mounting bracket and safety eyelet for secure installation.

Important Safety Instructions

General Warnings

Please read the safety warnings carefully and use the product only as described in this manual to avoid accidental injury or damage.

Intended Use

• This fog machine creates fog by vaporizing a special fog fluid. It is designed for professional use in event technology, e.g., on stage.
• Use the device only according to the instructions provided. Damages due to failure to follow operating instructions will void the warranty. No liability is assumed for resulting damage.
• No liability is assumed for material and personal damage caused by improper use or non-compliance with safety instructions. In such cases, the warranty will be null and void.
• Unauthorized rebuilds or modifications are not permitted for safety reasons and will invalidate the warranty.

Danger due to Electricity

• The device is suitable for indoor use only. Do not use it outdoors. Never expose it to rain or moisture. Do not store it in rooms exposed to moisture.
• To reduce the risk of electric shock, do not open any part of the device. There are no user-serviceable parts inside.
• Connect the device only to a properly installed mains outlet protected by a residual current breaker (RCD). Ensure the voltage and frequency match the device's rating. If the mains cable has an earthing contact, connect it to an outlet with a protective ground. Never defeat the protective ground. Failure to do so could result in damage to the device and injury to the user.
• The mains outlet must be easily accessible for quick unplugging.
• Never touch the mains plug with wet or damp hands due to the risk of electric shock.
• The mains cable must not be bent or squeezed. Keep it away from hot surfaces or sharp edges.
• Never pull the mains cable to disconnect the plug; always pull by the plug itself.
• Unplug the device during lightning storms, when unused for long periods, or before cleaning.
• Do not expose the device to high temperatures, direct sunlight, dripping or splashing water, strong vibrations, or heavy mechanical stress. Do not use it in tropical climates.
• Do not place objects filled with liquids or open sources of fire (like candles) on or near the device.
• Ensure that no objects, especially metal parts, can fall into the device.
• Repairs to the device or its mains cable must only be carried out by qualified service personnel. Repairs are required if the device or mains cable is visibly damaged, liquid has spilled, objects have fallen into the device, the device has been exposed to rain or moisture, has been dropped, or malfunctions occur.
• Cleaning is limited to the surface. Ensure moisture does not contact terminal connections or mains voltage control parts. Wipe the product with a soft, lint-free, moistened cloth. Never use solvents or aggressive detergents.

Danger to Children and People with Restricted Abilities

• This product is not a toy. Keep it out of reach of children and pets. Do not leave packaging material lying around carelessly. Never leave this device running unattended.
• This device may only be used by persons with sufficient physical, sensory, and intellectual abilities and corresponding knowledge and experience. Other persons may use this device only if supervised or instructed by a person responsible for their safety.

Warning - Risk of Injuries

• Never drink fluid or use it internally or externally on a human body. If fluid contacts skin or eyes, rinse thoroughly with water. Seek medical attention if necessary.
• Danger of explosion! Never add flammable liquids of any kind to the fog liquid.
• Never aim the output nozzle directly at people or open flames. Never aim the smoke at yourself, people, or animals.
• Never aim the smoke at power sockets or other objects powered by electricity, as this could damage them or expose you to hazardous electric shocks.
• Never aim the smoke at the device itself or at surfaces that are not heat-resistant. Avoid direct skin contact with the smoke, as high temperatures can cause burns if used improperly.
• DANGER OF BURNING! Maintain a minimum distance of 50 cm from the nozzle. Keep the device upright.
• Always disconnect from the mains when the device is not in use or before cleaning. Handle the power cord only by the plug. Never pull the plug by tugging the power cord.
• If the fog machine is not used for an extended period, empty the entire smoke fluid from the machine before storing it.
• Before filling, disconnect the device from the mains. Never fill with hot liquids. Use only high-quality, water-based smoke fluid recommended by the manufacturer. Other fluids may cause clogging. Always ensure there is sufficient smoke fluid in the tank. Operating without fluid can damage the pump and overheat the heater.
• For commercial use, country-specific accident prevention regulations for electrical facilities must be complied with.

Caution - Material Damage

• Always ensure there is sufficient smoke fluid in the tank. Operating without fluid can damage the pump and overheat the heater.
• After operation, flush the fluid ways with deionized water. If fog fluid remains in the system and the machine is not operated, irreversible damage may occur, voiding the warranty.
• If the device has been exposed to drastic temperature fluctuations, do not switch it on immediately. Resulting condensation may destroy the device. Allow the device to reach room temperature before connecting it and wait for condensation to evaporate.
• Always store the device dry. Drain the tank and use the original packaging for transport.
• Do not remove any serial number label affixed to the device, as this will void the warranty.

Operating Elements and Connections

The Eurolite Dynamic Fog 700 features several controls and connection points:

• 1. Output nozzle: Where the fog is emitted.
• 2. Mounting bracket: For attaching the unit to trusses or other structures.
• 3. Safety eyelet: For attaching a safety rope.
• 4. Tank: Holds the fog fluid.
• 5. Fixation screw: Secures the mounting bracket.
• 6. Control LED (on remote): Indicates the status of the remote control.
• 7. Fog output on/off (on remote): A green button to activate/deactivate fog output.
• 8. Power switch: Located on the rear of the unit, turns the machine on/off.
• 9. DIP switches: Used to set the DMX start address.
• 10. Blue LEDs on/off: Controls the blue LED lighting on the fan grille.
• 11. Power input with fuse holder: Standard IEC power connector and fuse housing.
• 12. DMX512 input: 3-pin XLR connector for receiving DMX signals.
• 13. DMX512 output: 3-pin XLR connector for sending DMX signals to other devices.
• 14. Remote control input: Jack for connecting the supplied cable remote control.

The included remote control has a magnetic base for convenient attachment to the fog machine. It features a green LED indicator and a green button to control fog output.

Setup

Filling up Fog Fluid

Fluid Handling Warning: Always disconnect the machine from the mains before filling. Use only water-based fluids; Eurolite recommends its own high-quality fluids. Never add flammable liquids. If fluid enters the machine's interior, have it checked by a professional before operation.

Unscrew the tank cap and fill the tank with fog fluid. Tightly close the tank again.

Placing the Unit

• Remove all packing materials from the shipping box, ensuring no remnants remain near the fog output nozzle.
• Install the device in a well-ventilated area. Operation in poorly ventilated rooms can lead to fog fluid condensation, creating slippery surfaces and potential accidents.
• Maintain a minimum clearance of 20 cm around and above the device.
• Install the fog machine only on scratch-resistant and water-resistant surfaces, with an inclination angle not exceeding 15°.
• Do not aim the output nozzle directly at the audience's eyes. For a good effect, maintain a distance of at least 1.5 meters from the audience.
• All fog machines produce condensation around the output nozzle. Consider this potential moisture accumulation on surfaces below the nozzle when installing the unit.

Overhead Installation

Warning: Risk of Injury from Falling Objects

Devices installed overhead can cause severe injuries if they fall. Ensure the device is securely installed and cannot fall. Installation must be performed by a specialist familiar with hazards and relevant regulations.

The device can be fastened to a truss or similar rigging structure. It must never be fixed to swing freely.

1. The rigging structure must support at least 10 times the weight of all fixtures to be installed.
2. Block the work area below and work from a stable platform during installation.
3. Use rigging hardware compatible with the structure and capable of bearing the device's weight. Refer to the “Accessories” section for suitable hardware.
4. Secure the device with a safety bond or other secondary attachment. This attachment must be sufficiently dimensioned according to current industrial safety regulations and designed so that no part of the installation can fall if the main attachment fails. An eyelet is provided on the device for the safety rope. Fasten the safety rope so that the maximum drop distance does not exceed 20 cm in case of a fall.
5. To align the device, release the fixation screws on the mounting bracket, adjust the desired inclination angle, and retighten the screws.
6. After installation, the device requires periodic inspections to prevent corrosion, deformation, and looseness.

Operation

Operating Conditions

CAUTION!

Prior to transportation, allow the machine to cool down and completely empty the tank. Never operate the fog machine without fog fluid, as this poses a fire hazard due to overheating and can damage the unit.

During operation, smoke emission may temporarily stop as the device reheats. This ensures the correct vaporization temperature for optimal fog emission, regulated by a high-quality thermostat.

The machine can be operated using the supplied cable remote control or a DMX controller. DMX control takes priority over cable remote control.

Switching On/Off

Before switching on, check the fluid level and fill if necessary. Connect the machine to the mains using the power plug. Switch the machine on using the power switch. The warm-up process begins immediately. Fog output is not possible during warm-up. Once the warm-up process is complete, fog output is enabled. After operation, switch off the machine using the power switch.

Operation via Cable Remote Control

For cable remote control operation, disconnect any DMX cable. Connect the remote control to the “REMOTE CONTROL” jack. The magnetic base of the remote allows attachment to the fog machine. When the green LED lights up, the machine is ready. Press the green button on the remote to activate fog output. Fog is emitted as long as the button is pressed. Releasing the button stops the fog output.

DMX Control

Making the DMX Connections

The unit features 3-pin XLR connectors for DMX. Connect your DMX controller's output to the machine's “DMX IN” jack using a DMX cable. Connect the machine's “DMX OUT” jack to the DMX input of the next unit in the chain, creating a daisy-chain. Always connect an output to the input of the next device until all units are connected.

At the last unit in the chain, the DMX cable must be terminated with a 120 Ω resistor plugged between Signal (-) and Signal (+) in the DMX output. For cable lengths exceeding 300 m or more than 32 connected DMX devices, a DMX signal amplifier is recommended for reliable data transmission.

XLR Connection Pinout:

• DMX Output (XLR socket): Pin 1: Ground, Pin 2: Signal (-), Pin 3: Signal (+).
• DMX Input (XLR plug): Pin 1: Ground, Pin 2: Signal (-), Pin 3: Signal (+).

Adjusting the DMX Start Address

The fog machine uses one control channel on the DMX controller. To ensure correct signal direction, set the machine's DMX start address to match the address assigned on the DMX controller. The address is set via the DIP switches as a binary number. The address is calculated by summing the values of the DIP switches set to “ON”. When the machine receives DMX control signals, the green DMX indicator lights up, and the machine can be operated via the DMX controller.

DIP Switch Configuration:

The DIP switches (1-9) are used to set the DMX start address. The table below shows how to set them for different device numbers and channels:

DMX Functions:

Cleaning and Maintenance

General Cleaning

Regular cleaning is recommended. Excessive dust, fluid residue, and dirt can degrade performance and cause overheating. Remove dust from air vents using an air compressor, vacuum, or soft brush. For exterior cleaning, use a soft, lint-free, moistened cloth. Never use alcohol or solvents.

There are no user-serviceable parts inside the device. Maintenance and service operations should only be performed by authorized dealers. Use only genuine spare parts. Dispose of unusable devices according to current legal regulations. Contact your dealer for further questions.

Cleaning the Heating Element After Use

To prevent deposits, clean the heating element with deionized water after each use. Fog machines are prone to clogging due to the consistency of fog liquid. Proper maintenance ensures years of reliable service.

Procedure:

1. After operation, empty the remaining fluid from the tank into a clean container for storage. Then fill the tank with deionized water.
2. Run the machine for approximately 3 minutes in a well-ventilated room.
3. After the cleaning process, empty the tank completely. Residual water may remain in the machine.

Storage

It is recommended to run the machine at least once a month with deionized water. Allow it to warm up and run for approximately 3 minutes.

Replacing the Fuse

If the fine-wire fuse blows, replace it with a fuse of the same type and rating.

1. Disconnect the device from power and allow it to cool.
2. Open the fuse holder at the power input using a suitable screwdriver.
3. Remove the old fuse and insert a new one.
4. Carefully push the fuse holder back into its position before reconnecting power.

Protecting the Environment

Disposal of Old Equipment: When the product is to be permanently taken out of operation, take it to a local recycling plant for environmentally sound disposal. Devices marked with this symbol must not be disposed of as household waste. Contact your retailer or local authorities for more information. Remove any inserted batteries and dispose of them separately from the product.

As an end user, you are legally required (Battery Ordinance) to return all used batteries/rechargeable batteries. Disposal via household waste is prohibited. Used batteries can be returned free of charge to collection points in your municipality and wherever batteries are sold. By correctly disposing of used devices and batteries, you contribute to environmental protection.

Technical Specifications

Specifications are subject to change without notice due to product improvements.

Accessories

• No. 51703752: EUROLITE Smoke Fluid -B2D- Basic 5l
• No. 51703798: EUROLITE Smoke Fluid -C2D- Standard 5l
• No. 51703832: EUROLITE Smoke Fluid -P2D- professional 5l
• No. 51704655: EUROLITE Fog Fragrance Set with all 14 Types
• No. 59006856: EUROLITE TPC-10 Coupler, silver
• No. 58010310: EUROLITE Safety Bond A 3x600mm up to 5kg sil
• No. 3022785H: EUROLITE DMX cable XLR 3pin 3m bk

Eurolite is a brand of Steinigke Showtechnic GmbH, Andreas-Bauer-Str. 5, 97297 Waldbüttelbrunn, Germany.