INBAY Wireless Charging Subsystem Gen.4 3-Coil

Product Overview & Models

The INBAY Wireless Charging Subsystem is available in several configurations:

• 240000-01-200: Full specification subsystem, includes NFC function, NFC / RFID tag detection & CAN bus.
• 240000-01-201: Medium specification subsystem, includes NFC / RFID tag detection.
• 240000-01-202: Low specification subsystem, without NFC & CAN bus.

Specifications (Wireless Charging Subsystem 1.3 Gen.4 3-Coil)

Features

• Overvoltage Protection ⚡
• Over Current Protection ⚡
• Over Temperature Protection ?️
• NFC Card Detection ?
• Foreign Object Detection (FOD) ?

Dimensions

Diagram showing the top, side, and front views of the Wireless Charging Subsystem with dimensions. Overall length is 180 mm, width is 100 mm. Thickness is approximately 25.5 mm from the top and 19.1 mm from the bottom. The connector housing extends slightly.

Diagram showing the power cable with a main connector and smaller connectors for wire splicing.

Installation Opening

Diagram illustrating the required installation opening dimensions: 175 mm in length and 95 mm in width, with rounded corners having a radius of 12.5 mm. Text indicates 'cut the surface'.

Mounting

Diagram showing the underside of the subsystem with four mounting points, indicating the use of 4 x M2.5 screws.

Diagram illustrating the process of inserting the subsystem into the prepared opening. Step 1 shows aligning the subsystem, and Step 2 shows it being pressed into place.

Power Connection

Diagram showing a close-up of wire splicing connectors. One set is for Ø 1.5 mm² (red) wires, and another set is for Ø 2.5 mm² (blue) wires. Arrows indicate the connection process.

Diagram illustrating the correct polarity for connecting the power cable. The +12V wire (red) connects to the positive terminal, and the -GND wire (black) connects to the ground terminal. A warning symbol ⚠️ and text 'check polarity!' are displayed.

Integrated Foreign Object Detection (FOD)

Diagram illustrating the concept of Foreign Object Detection (FOD). It shows various objects like coins, credit cards, and a smartphone with a ring stand holder, all marked with a red 'X' symbol ?, indicating they should not be placed on the charging surface. The charging surface itself is depicted with a red 'X' over it when an object is detected.

IMPORTANT INFORMATION: Please do not place any other objects such as coins, credit cards etc. onto the INBAY surface. Especially smartphones with attached ring stand holders must not be used! Otherwise, the integrated Foreign Object Detection (FOD) will interrupt wireless charging for safety reasons.

Power Limits

Diagram showing a +12V power connection with a warning symbol ⚠️ and text '5A / 60W max'.

ATTENTION! After installation, devices/consumers with more than 5A / 60W shall not be operated on the +12V socket. Otherwise, a risk of overvoltage can occur!

Product Sample and Manual Placement

Product photo showing a sample of the INBAY Wireless Charging Subsystem unit and its associated power harness with connectors.

Diagram showing a hand placing a 'MANUAL' document into a car's dashboard compartment. Text emphasizes: 'IMPORTANT! AFTER INSTALLATION THE MANUAL HAS TO BE PLACED INTO THE DASH BOARD OF THE CUSTOMER'S CAR.' ?

Regulatory Compliance

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• - Reorient or relocate the receiving antenna.
• - Increase the separation between the equipment and receiver.
• - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• - Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RF Exposure warning: This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 10 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

ISED Compliance (Canada)

Industry Canada Equipment Standard for Digital Equipment (ICES) – Canada Compliance Statement

This Class B digital apparatus complies with Canadian ICES-003. CAN ICES-3 (B)/NMB-3(B)

Cet appareil numérique de la classe B est conforme à la norme ICES-003. CAN ICES-3 (B)/NMB-3(B) du Canada.

Innovation, Science and Economic Development Canada (ISED) Compliance Statement

This device complies with ISED's licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d' ISED applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.

Radio Frequency (RF) Exposure Information

The radiated output power of the Wireless Device is below the Innovation, Science and Economic Development Canada (ISED) radio frequency exposure limits. The Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.

This device has also been evaluated and shown compliant with the ISED RF Exposure limits under mobile exposure conditions. (antennas are greater than 10 cm from a person's body).

Informations concernant l'exposition aux fréquences radio (RF)

La puissance de sortie émise par l'appareil de sans fil est inférieure à la limite d'exposition aux fréquences radio d'ISED Canada (ISED). Utilisez l'appareil de sans fil de façon à minimiser les contacts humains lors du fonctionnement normal.

Ce périphérique a également été évalué et démontré conforme aux limites d'exposition aux RF d'ISED dans des conditions d'exposition à des appareils mobiles (antennes sont supérieures à 10 cm à partir du corps d'une personne).

Human Exposure and Installation Area

Diagram illustrating human exposure zones within a car's seating arrangement, showing a stylized person in a driver's seat and passenger seats. Distances from various body parts (Knee, Leg, Body, Hand, Arm, Head) to potential device locations are provided in tables.

Diagram showing a typical car interior installation area, highlighting the space where the wireless charging tray can be integrated.

Driver Seat Exposure Distances

Passenger Seat Exposure Distances

Rear Passenger Exposure Distances

Rear Left

Rear Middle

Rear Right