First Setup
1. Automatic Headphone Pairing:
A. Remove the earbuds from the charging case and peel off the stickers.
[Illustration showing earbuds being removed from case and stickers being peeled off]
B. Press and hold both power buttons for more than 2 seconds to turn on the device. The left earbud will light up solid white, and the right earbud will flash blue/white, indicating it is ready to pair with your device.
[Illustration showing button press action and earbud light indicators]
2. Connecting via Bluetooth:
In your device settings, select “JLab Epic Air Sport”. Two audible cues followed by a solid white light indicate you are connected.
[Screenshot of Bluetooth settings showing "JLab Epic Air Sport" connected]
Adding New / Additional Devices via Bluetooth:
Turn off Bluetooth on all previously connected devices. Turn on Bluetooth on the new device. Remove the earbuds from the charging case. The earbuds will automatically begin pairing via Bluetooth. In your device settings, select “JLab Epic Air Sport” to connect them.
In the Box
- Earbuds: JLab Epic Air Sport
- Charging Case: For storing and charging earbuds.
- Ear Tips: Standard, Shallow, Cloud Foam, Dual-Flange, Triple-Flange for a secure and comfortable fit.
[Illustration showing earbuds, charging case, and various ear tips]
Controls
Left Earbud Sensor:
- Volume Down: Single tap
- Siri (iOS) or "OK Google" (Android): Double tap
- Previous Track: Press and hold for >1 second
- Change EQ: Triple tap (Cycles through 3 EQ settings)
[Diagram indicating the touch sensor on the left earbud]
Right Earbud Sensor:
- Volume Up: Single tap
- Play/Pause: Double tap
- Next Track: Press and hold for >1 second
- Answer Call: Single tap
- Hang Up/End Call: Double tap
- Reject Incoming Call: Press and hold for >2 seconds
- Be Aware On/Off: Triple tap
[Diagram indicating the touch sensor on the right earbud]
Voice Prompts:
- On: Ring ?
- Bluetooth Connected: Two audible cues ?
- Low Battery: "Low battery" (less than 20%) ?
- Off: Ring ?
Power On: Press and hold for >1 second.
Power Off: Press and hold for >3 seconds.
Bluetooth Pairing: Refer to First Setup.
Equalizer Modes
Triple tap the left earbud for different equalizer settings. Voice prompts will indicate the EQ settings. (Epic Air Sport will cycle through 3 EQ settings).
- JLab Signature (One Audible Cue): Characteristic JLab C3™ sound with enhanced vocals and bass.
- Balanced (Two Audible Cues): Balanced sound without additional bass.
- Bass Boost (Three Audible Cues): Enhanced bass and sub-bass.
Automatic Power On/Off
1. Charging: If you place the earbuds in the charging case, they will turn off and begin charging. A blue light indicates the earbuds are charging and will turn off when fully charged. ?➡️⚪
[Illustration showing earbuds placed in charging case, indicating charging status]
2. Auto On: When you remove the earbuds from the charging case, they will turn on and reconnect to your device.
[Illustration showing earbuds being removed from case, ready to connect]
Charging Case
Connect the Epic Air Sport to a computer's USB port or a USB 5V 1A (or less) adapter for charging. Lights pulsate white during charging and are solid white when earbuds are fully charged. ⚪ (pulsing) ➡️ ⚪ (solid)
[Illustration showing charging case connected to a USB port, with charging indicator lights]
Fitting Your Earbuds
For optimal comfort and a secure fit, ensure the earbuds are inserted correctly into your ears. The ear hooks should gently rest over your ear.
[Diagrams showing the correct way to insert and fit the earbuds into the ear]
Troubleshooting
No Sound in Left Earbud or Earbuds Disconnecting from Each Other (Manual Reset)
- Open your device's Bluetooth settings and select the option to forget the Epic Air Sport. [See A]
- Open the charging case lid and keep both earbuds inside. Starting with ONE earbud, quickly tap the touch sensor 4 times. The light will flash blue 4 times and then turn solid blue. Keep the earbuds in the charging case. [See C1]
- Repeat with the other earbud. Quickly tap the touch sensor 4 times. The light will flash blue 4 times and then turn solid blue. [See C2]
- Remove both earbuds from the charging case and hold them within 2 inches of each other. Wait for the left earbud to turn solid white and the right to flash blue/white. You are now ready to pair your device via Bluetooth.
Bluetooth Device Not Connecting / Reconnecting
- Open your device's Bluetooth settings and select the option to forget the Epic Air Sport. [See A]
- Turn Bluetooth OFF and then ON on your device. [See B]
- Remove the earbuds from the charging case. Wait for the left earbud to turn solid white and the right to flash blue/white.
- In your device settings, select “JLab Epic Air Sport” to reconnect them.
[Illustrations A, B, C1, C2 showing phone settings and earbud light status]
Instructional videos can be found at: intl.jlabaudio.com/manuals
Quick Tips
- Completely dry the earbuds before placing them in the charging case to prevent damage to the case. The earbuds are sweat/water resistant, but the case is not. ?➡️?
- The Bluetooth connection is established through the right earbud. For the most stable connection, keep your device near your right hand or in your right pocket. ?➡️? (Right)
- If you wish to wear only one earbud, you must wear the right one. ? (Right only)
- Only ONE device can be connected via Bluetooth at a time. Turn off Bluetooth on devices you do not wish to use, and turn it on for the devices you want to connect. ? (One device at a time)
Warnings & Cautions
Warning
- Completely dry the earbuds before placing them in the charging case.
- If the earbuds are damp or wet, the charging case will be damaged. If the charging case is damaged by water/sweat, your warranty will be voided. ⚠️?➡️❌
- Do not deform the ear hooks. The ear hooks are made of flexible silicone but also have a rigid internal structure for the antenna. Pulling on the ear hook may break or damage the antenna.
Caution
- Avoid moisture or liquid entering the ear tip or charging port.
- Avoid extreme heat, cold, and humidity. ?️
- Avoid dropping or crushing the earbuds, straining the cable with quick pulls or excessive force, or bending the cable at sharp angles.
- Earwax may accumulate on the ear tips, causing reduced sound quality. Carefully remove earwax with a cotton swab or other small tool to restore sound quality. ?✨
- If you experience discomfort or pain, try lowering the volume or temporarily stop using the earbuds.
- If you experience persistent discomfort while using this product, discontinue use and consult a doctor.
Get the Most from Your Earbuds
Download the JLab Audio app for product updates and to break-in your earbuds.
