Yealink MTouch Plus Installation Guide

Package Contents

The MTouch Plus package includes the following items:

MTouch Plus: The main display unit.
CAT5e UTP Cable: A network cable with RJ45 connectors, approximately 7.5 meters (24.6 feet) long.
USB 3.1 (C - C, HDMI) Cable: A USB-C to USB-C cable, approximately 1.2 meters (3.94 feet) long, also supporting HDMI output.
Mounting Bracket: A metal bracket with dimensions approximately 207.44 mm by 126.99 mm, used for mounting the device.
Screws (x4): Four white polyamide screws, size Φ6 * 30 mm.
Screws (x4): Four screws, size 4*30 FAHOZN3+.
Screws (x2): Two M8*60mm SUS304 screws.
Washers (x2): Two washers, size M8*Φ30*T2mm, made of SUS304.
Wing Nuts (x2): Two wing nuts, size M8, made of SUS304.
Screws (x4): Four screws, size 2.5*8.0PAHOZN3+.
Screws (x4): Four screws, size 2.5*9.0FMHZN+.
Lock cable buckle: A metal buckle for securing cables.
Double-Coating Tape: A roll of tape, dimensions L200*W62.5*T1.2mm.
Screwdriver: A Phillips head screwdriver, size WH-85*3.0mm.
Quick Start Guide: A booklet providing initial setup instructions.

Installation Methods

Paste on a Table

This method involves placing the MTouch Plus on a table using its integrated stand. The device can be tilted to an angle of approximately 70 degrees for optimal viewing.

Diagram Description: The diagram shows the MTouch Plus unit placed on a flat surface, supported by its adjustable stand, tilted backward to an angle of about 70 degrees.

Fix on a Table

This method secures the MTouch Plus to a table surface. It involves attaching the mounting bracket to the back of the MTouch Plus, then positioning the assembly on the table and securing it with screws. For cable management, a wiring hole and screw holes are required on the desktop. A template indicates a wiring hole of 38.5mm and screw holes spaced 100mm apart.

Diagram Description: The diagrams illustrate attaching the mounting bracket to the MTouch Plus, then placing it on a table. Another diagram shows the bracket being screwed directly into the table surface. A separate diagram shows a template for drilling holes on a desktop, indicating a 38.5mm wiring hole and two screw holes 100mm apart.

? Note: Please select the outlet hole according to your needs.

Wall Installation

The MTouch Plus can also be mounted on a wall. This process involves attaching the mounting bracket to the back of the MTouch Plus, then securing the bracket to the wall using appropriate screws. The recommended height for wall installation is between 1m and 1.5m from the ground. Wiring can be done through the wall if the environment permits.

Diagram Description: A series of diagrams show the step-by-step process for wall mounting. This includes attaching the bracket to the device, preparing the wall by drilling holes (indicated with 100mm spacing for screws), inserting screws into the wall, and finally mounting the MTouch Plus assembly onto the wall.

? Note: We recommend that the height of the wall installation is 1m~1.5m from the ground. Please select the outlet hole according to your need. If the conference room environment allows, you can also wire through the wall.

Connection

Assemble Your MTouch Plus

This section covers the physical assembly and connection of the MTouch Plus to other components in a conference room setup.

Diagram Description: Diagrams illustrate connecting cables to the back of the MTouch Plus. It shows options for routing cables, including attaching them to a desk or wall for neatness.

Connect Your MTouch Plus

The MTouch Plus connects to a PC and a MCore Pro unit. The CAT5e cable connects the MTouch Plus to the MCore Pro, while a USB 3.1 (C-C, HDMI) cable connects the MTouch Plus to the PC. A USB-C PD Power supply is required to power the MTouch Plus and potentially the PC.

Diagram Description: The diagrams show different connection scenarios. One shows the MTouch Plus connected to a PC (not included) via USB-C (HDMI) and to a MCore Pro via CAT5e. A USB-C PD Power supply (not included) is shown powering the MTouch Plus. Another diagram shows a similar setup but with a PC connected via USB-A to USB-C, and also includes a WPP30 wireless presentation device and a CP900/MSpeech speakerphone.

? Note:

You can purchase additional PD power supply to power the PC.
Not included accessories requirements:

PC: Must be equipped with an HDMI or USB-C port (supporting DP protocol).
USB-C PD Power: Requires a PD power adapter with a power transmission greater than 45W, equipped with a USB-C cable.

	Yealink MTouch Plus Installation Guide Detailed installation instructions for the Yealink MTouch Plus, covering package contents, table mounting, wall mounting, and connection procedures for conference room setups.
	Yealink SmartVision 60 Installation Guide Comprehensive installation guide for the Yealink SmartVision 60 video conferencing camera, detailing package contents, hardware features, LED status indicators, assembly steps, optimal room placement, and connection diagrams.
	Yealink MVC940-C5-008: Setup and Installation Guide Comprehensive guide for setting up and installing the Yealink MVC940-C5-008 video conferencing system, including unboxing, component identification, connection diagrams, and initial configuration steps.
	Yealink MVC System Quick Setup Guide A concise guide to booting and initializing the Yealink MVC system, including initial setup, login procedures, account settings, and firmware updates.
	Yealink ZVC System Quick Setup Guide A comprehensive guide to booting and initializing the Yealink ZVC system for administrators, covering initial setup, account sign-in, network checks, account settings, firmware updates, and pre-use testing.
	Yealink CP900 USB Speakerphone Quick Start Guide Comprehensive guide to setting up and using the Yealink CP900 USB Speakerphone, including package contents, charging, connectivity options (USB, Bluetooth), placement, button functions, LED indicators, and regulatory information.
	Yealink MVC640 Microsoft Teams Rooms System for Medium Rooms Yealink MVC640 is a Microsoft Teams Rooms system designed for medium conference rooms, featuring a high-performance MINI-PC MCore Pro, MTouch E2 touch panel, and UVC84 4K PTZ camera. It offers native Microsoft Teams integration, auto-framing, and flexible content sharing options.
	Yealink MVC Quick Setup Guide: Initializing and Configuring Your System A comprehensive quick setup guide for Yealink MVC systems, covering initial setup, login procedures, account configuration, network checks, and firmware updates for administrators.