Manuals+

Yealink MTouch Plus Installation

Package Contents

  • MTouch Plus
  • CAT5e UTP (RJ45 - RJ45) Cable (7.5m, 24.6ft)
  • USB 3.1 (C - C, HDMI) Cable (1.2m, 3.94ft)
  • Mounting Bracket (Dimensions: 207.44 mm x 126.99 mm)
  • Φ6 * 30 mm, white, Polyamide screws (x4)
  • 4*30 FAHOZN3+ screws (+) (x4)
  • M8*60mm, SUS304 screws (x2)
  • Washer (M8, SUS304) (x2)
  • Wing Nuts (M8, SUS304) (x2)
  • Lock cable buckle (x4)
  • 2.5*8.0PAHOZN3+(+) screws (x4)
  • 2.5*9.0FMHZN(+) screws (x4)
  • Double-Coating Tape (Dimensions: L200*W62.5*T1.2mm)
  • Screwdriver (WH-85*3.0mm)
  • Quick Start Guide

Installation

Put on a table

The MTouch Plus can be placed directly on a table surface.

Diagram Description: The MTouch Plus device can be positioned on a table at two different angles: a steeper 70-degree angle or a shallower 30-degree angle.

Fix on a table

This method involves securing the MTouch Plus to a table using the provided mounting bracket and screws.

Diagram Description:

  • Step 1: Shows the mounting bracket being attached to the rear of the MTouch Plus device.
  • Step 2: Depicts the MTouch Plus with its attached bracket being placed onto a table surface.
  • Step 3: Illustrates the MTouch Plus assembly being secured to the table with screws.
  • Step 4: Shows a close-up of a desktop surface with three holes marked for installation: a central wiring hole (38.5mm diameter) and two screw holes spaced 100mm apart.
  • Step 5: Shows the MTouch Plus unit being mounted onto the pre-drilled holes on the table.

Instruction: Drill three holes on the desktop according to the indicated measurements.

Wall installation

The MTouch Plus can also be mounted on a wall using the mounting bracket.

Diagram Description:

  • Steps 1-3: Show the process of attaching the mounting bracket to the MTouch Plus device.
  • Step 4: Illustrates drilling holes on a wall, indicating a 100mm spacing between the screw holes.
  • Step 5: Shows the mounting bracket being screwed into the wall.
  • Step 6: Depicts the MTouch Plus unit being attached to the wall-mounted bracket.

NOTE:

  • It is recommended that the height of the wall installation is 1m to 1.5m from the ground.
  • Select the outlet hole location according to your needs. If the conference room environment allows, wiring can also be routed through the wall.

Connection

Assemble and connect your MTouch Plus to your system.

Diagram Description: Illustrations show various connection configurations for the MTouch Plus:

  • Connection 1: MTouch Plus connected to the MCore Pro using a CAT5e cable.
  • Connection 2: MTouch Plus connected to a PC using a USB 3.1 (C-C, HDMI) cable.
  • Connection 3: A combined setup where the MTouch Plus is connected to both the MCore Pro via CAT5e and to a PC via USB-C.
  • Connection 4: MTouch Plus connected to a PC via USB-C and to a CP900/MSpeech speakerphone via a USB-A cable.

Instruction: You can attach wires to a desk or wall for neat cable management.

NOTE:

  • Additional PD power supply can be purchased to power the PC.
  • Not included accessories requirements:
  • PC: Must be equipped with an HDMI or USB-C port (supporting DP protocol).
  • USB-C PD Power: Requires a PD power adapter with a power transmission greater than 45W, equipped with a USB-C cable.
Models: 1306022 MTouch Plus 11.6 Inch Touch Screen, 1306022, MTouch Plus 11.6 Inch Touch Screen, 11.6 Inch Touch Screen, Touch Screen, Screen

PDF preview unavailable. Download the PDF instead.

MTouch-Plus-Installation wkhtmltopdf 0.12.6 Qt 4.8.7

Related Documents

Preview Yealink MTouch Plus Installation Guide
A comprehensive guide for installing the Yealink MTouch Plus, detailing package contents, mounting options (table and wall), and connection procedures for conference room setups.
Preview Yealink SmartVision 60 Installation Guide
Comprehensive installation guide for the Yealink SmartVision 60 video conferencing camera, detailing package contents, hardware features, LED status indicators, assembly steps, optimal room placement, and connection diagrams.
Preview Yealink MVC400: Microsoft Teams Rooms System for Small Meeting Rooms
Explore the Yealink MVC400, a native and user-friendly Microsoft Teams Rooms system optimized for small meeting spaces. It integrates AI-powered features like Auto Framing and Speaker Tracking, a 133° field of view, and simplified deployment for enhanced collaboration.
Preview Yealink MVC940-C5-008: Setup and Installation Guide
Comprehensive guide for setting up and installing the Yealink MVC940-C5-008 video conferencing system, including unboxing, component identification, connection diagrams, and initial configuration steps.
Preview Yealink MVC860-C5-713 Video Conferencing System: Package Contents and Setup
Comprehensive guide to the Yealink MVC860-C5-713 video conferencing system, detailing package contents for UVC86, MCore Pro, MTouch Plus, MSpeaker II, RCH40, and RoomSensor, alongside installation and setup instructions.
Preview Yealink MTouch II Quick Start Guide: Setup, Connection, and Operation
Comprehensive quick start guide for the Yealink MTouch II touch panel. Learn about package contents, connection diagrams, installation, hardware interfaces, wireless presentation with WPP20, and LED indicators. Includes regulatory information and technical support details.
Preview Yealink MVC Quick Setup Guide: Initializing and Configuring Your System
A comprehensive quick setup guide for Yealink MVC systems, covering initial setup, login procedures, account configuration, network checks, and firmware updates for administrators.
Preview Yealink MVC400: Microsoft Teams Rooms System for Small Meeting Rooms
Discover the Yealink MVC400, a native and easy-to-use video conferencing solution for Microsoft Teams rooms. Featuring AI technologies like Auto Framing and Speaker Tracking for enhanced collaboration in small meeting spaces.