Rabalux Kobald Spotlight Installation Guide

Before Installation

Ensure the power is switched OFF at the circuit breaker before proceeding with installation. This is indicated in Diagram A.

Mounting the Fixture

Step 1: Attach the mounting bracket to the ceiling using the provided screws. (Diagram B, labeled '1')

Step 2: Connect the wires. The diagram shows a connection block with terminals labeled L (Line), N (Neutral), and Earth. Use a screwdriver to secure the wires. (Diagram B, labeled '2')

Installing the Bulbs

Step 3: Insert the bulbs into the sockets. The arrows indicate a twisting motion to secure them. (Diagram B, labeled '3')

Step 4: Attach the glass covers or diffusers by twisting them into place. (Diagram B, labeled '4')

Step 5: Final insertion of bulbs into the fixture. (Diagram B, labeled '5')

Final Check

Once installation is complete, switch the power back ON at the circuit breaker. (Diagram C)