Rabalux 72412 Pendant Light Installation Guide
Model Number: 72412
Mounting and Installation
This guide provides instructions for installing the Rabalux 72412 pendant light.
Step 1: Prepare Mounting
Attach the mounting bracket to the ceiling or wall. The diagram shows the bracket being fixed with screws and wall plugs.
Visual Representation: [Diagram showing wall mounting bracket secured with screws and wall plugs]
Step 2: Secure Fixture Canopy
Mount the fixture canopy. The diagram indicates using screws (labeled 4) to attach the canopy. A rotational symbol [Tighten/Rotate] suggests securing the fixture.
Visual Representation: [Diagram showing fixture canopy attachment with screws]
Electrical Connections
Wire Termination
Connect the power supply wires to the terminal block located within the fixture canopy. The terminal block is clearly marked:
- L: For the Live wire connection.
- N: For the Neutral wire connection.
Ensure all connections are secure under the terminal screws.
Visual Representation: [Diagram of a terminal block with L and N labels]
Control Panel Information
Switch Operation
The fixture may be connected to a control panel featuring multiple switches. Each switch can be set to 'ON' or 'OFF'. A finger is shown interacting with one of these switches.
Visual Representation: [Diagram of a switch panel with ON/OFF settings]
