VEVOR AC EV Charger User Manual

Introduction

This user manual provides comprehensive guidance for the VEVOR AC EV Charger, Model EV-B06-EU003A. It covers essential product information, safety precautions, operating instructions, and troubleshooting tips to ensure safe and efficient use of your electric vehicle charging equipment.

Key Features and Specifications

The VEVOR AC EV Charger is designed for convenient and reliable EV charging. Key features include:

• Model: EV-B06-EU003A
• Input Voltage: 220-240V~50Hz
• Output Voltage: 220-240V~50Hz
• Power Output: 3.7KW
• Maximum Output Current: 16A
• Protection Level: IP66 (dustproof and waterproof)
• Protection Functions: Fire protection, over current, over voltage, under voltage, ground protection, over temperature protection, self monitoring and recovery.
• Indicator Lights: Green (standby), Yellow (charging), Red (failure)
• Charging Interface: European standard charging gun
• Input Plug: Schuko
• Operating Temperature: -25°C to 45°C

Safety Precautions

Prioritize safety by adhering to the following precautions:

• Ensure the electrical grid is compatible (single-phase 230 V ±10%, 50 Hz).
• Install circuit breakers for the equipment's input.
• Keep flammable or explosive materials away from the charging area.
• Avoid using damaged charging cables or equipment.
• In case of fire, electric shock, or other abnormal situations, press the stop button immediately.
• Do not attempt to remove, maintain, or modify the charging pile yourself.

Operating Instructions

Follow these steps for operating the VEVOR AC EV Charger:

1. Power On: The device enters standby mode upon powering on.
2. Adjust Charging Current: Use the button to cycle through current settings (16A, 13A, 10A, 8A).
3. Appointment Charging: Utilize the delayed charging function in the VEVOR app for scheduled charging (1-12 hours delay).
4. Start Charging: Insert the charging gun into the vehicle's charging port. The yellow light will flash if no appointment is set.
5. APP Control: Download the VEVOR smart app to manage charging current, set charging times, and monitor charging status. Refer to the app download instructions within the manual.

Troubleshooting

Refer to the troubleshooting section for common issues:

• Poor Grounding Alerts: Check socket grounding and device virtual ID.
• Solid Yellow Light (Cannot Charge): Ensure the app is installed and try restarting the charging process via the app or by resetting the charging cable.
• Red Light Flashing (Charging Not Possible): Check display messages, download the app for alarm information, or contact VEVOR after-sales service.
• Screen Issues: Disconnect and reconnect power. If the problem persists, contact after-sales service.

Installation

The manual includes detailed instructions for wall mounting the EV charger, including recommended height and drilling specifications.

Contact Information

For product questions or technical support, please contact VEVOR customer service at CustomerService@vevor.com.