Midland BTT Button Pro Pocket Guide
Bike Handlebar Button for Communication via BTTalk App
Replacing Battery
Step 1:
Diagram showing the battery compartment being opened.
Step 2:
Diagram showing the old battery being removed and a new CR2032 lithium battery being inserted.
Frequency: 2.402-2.480 GHz
Output Power: <10mW
Download BTTalk App
QR codes for downloading the BTTalk App on Android and Apple devices.
Description of the Parts
Diagram showing the BTT Button Pro with numbered parts:
- 1. Main PTT
- 2. LED
- 3. Connection of the wired PTT
- 4. Finger PTT
LED Status
| LED | Status |
|---|---|
| Led blinks red | Unit on and not connected to the APP |
| Led blinks blue | Unit on and connected to the APP |
| Led blinks alternately red and blue | Pairing |
| Led blinks red alternately to the connection led | Battery discharged |
| Red led 1 sec. | Reset |
Installation
Step 1:
Diagram showing the connector being inserted into the device. Note: Insert the connector making sure it is plugged-in completely.
Step 2:
Diagram showing the main PTT being attached to handlebars with Velcro and the wired PTT being secured with a strap. Note: Fix the main PTT anywhere with the adhesive Velcro. Fix the wired PTT on the handlebar with the supplied strap, as shown in the picture.
Pairing
Diagram showing the LED blinking alternately red and blue. Press once.
Steps:
- Enter Midland APP
- Setting
- Bluetooth Management and follow the instructions of the APP
Using BTT Button Pro
Open the APP
Diagram showing the LED blinking red (not connected). Press once.
Diagram showing the LED blinking blue (connected). Press once.
Reset
Diagram showing a button press. Press once.
Diagram showing a 10-second press. Press together 10 sec.
Diagram showing a steady red LED. Steady red led 1 sec. (Reset confirmed).
Note: The reset procedure, which is described later on, must be executed before any other pairing.
