Midland BTT Button Pro
Quick Start Guide
Motorcycle Handlebar Button for communication via the BTTalk App.
Battery Replacement
Step 1
Illustration showing the removal of the battery cover.
Step 2
Illustration showing the CR2032 lithium battery being replaced.
Frequency: 2.402–2.480 GHz
Emission Power: <10mW
Download the BTTalk App
Scan the QR codes to download the application.
[Android QR Code]
[Apple QR Code]
Product Description
1. Main PTT Button
2. LED Indicator
3. Wired PTT Connection
4. Finger PTT Button
LED Status Guide
-
Red light flashing: Device on and not connected to the app.
-
Blue light flashing: Device on and connected to the app.
-
Alternating red and blue flashing: Pairing in progress.
-
Red light flashing alternately with connection indicator: Low battery.
-
Solid red light for 1 second: Reset.
Installation
Step 1
Illustration showing how to attach the main PTT button using adhesive Velcro.
Step 2
Illustration showing the wired PTT button attached to the handlebar using the provided strap.
Note: Insert the connector ensuring it is fully seated.
Note: Attach the main PTT button to the desired location using the adhesive Velcro. Attach the wired PTT button to the handlebar using the provided strap, as shown in the image.
Pairing
1 Click: Press once.
The LED flashes red and blue alternately.
- Access the Midland (BTTALK) application.
- Go to Settings.
- Manage Bluetooth and follow the application's instructions.
Note: The reset procedure (described later) should be performed before any other pairing.
Using the BTT Button Pro
Press Once
Illustration showing a single press of the PTT button.
The LED flashes blue (connected).
Press Once
Illustration showing a single press of the PTT button.
The LED flashes red (not connected).
Reset
1 Click: Press once.
10" Press Simultaneously: Press and hold for 10 seconds.
The LED is solid red for 1 second (reset confirmed).
