Introduction
Thank you for choosing a SEBSON product. Please read these instructions carefully and keep them for future reference. Proper installation and start-up ensure long and trouble-free operation.
Intended Use: This SEBSON mirror luminaire is suitable for mounting on cabinets or shelves, or on cabinet doors. With its IP44 protection class, it is designed for use in damp rooms.
Scope of Delivery
- 1 Mirror light
- 2 Screws for fixing
General Safety Instructions
Danger: Installation must be performed by a qualified person according to valid electrical and installation regulations.
Danger: In case of damage or contact with water, immediately disconnect the product from power and ensure it cannot be re-energized. ⚡️??
Danger of Suffocation: Keep this product away from children and animals. Packaging contains small parts that can be swallowed. ??⚠️
Caution: To prevent fire or eye damage, never direct the light beam directly at people or animals, and avoid looking directly into the light source. ????
- The built-in LED light source cannot be replaced. ??️?
- Modifying this product is not permitted. Modifications compromise safe and proper functioning and void the warranty. ??
- Do not connect a dimmer, as it may damage the lamp. ???
- Do not cover the luminaire with heat-insulating materials, as this can damage the LEDs due to excessive heat development. ?️?
- The manufacturer is not liable for injuries or damage resulting from improper use.
- Any use other than described may damage the product and cause hazards like electric shock, short circuit, or fire.
- Changes to the product, packaging, or instructions, as well as printing errors, are reserved.
- Protect the product from external damage, heavy dirt, moisture, and excessive heat.
- To maintain warranty, use only supplied parts. Repairs must be performed by experts using original spare parts.
- In commercial facilities, accident prevention regulations for electrical installations must be observed.
Installation Guide
Danger: Ensure the circuit is interrupted before installation. Installation involves working with mains voltage. Remove the corresponding fuse or deactivate the circuit breaker. Use a voltage tester to confirm the line is de-energized. The circuit must not be closed during installation; this poses a risk to life.
Caution: Before drilling mounting holes, ensure there are no gas, electricity, or water pipes at the drilling location that could be damaged.
- This product is intended for indoor use only. It is not suitable for outdoor use.
- Maintain a minimum distance of 50cm between the illuminated area and the luminaire.
- Always observe the safety instructions and technical data before mounting.
Installation Notes:
- L: Live wire (black or brown)
- N: Neutral conductor (blue or grey)
Diagram Description: The installation diagram illustrates the mounting process. Step A shows the power being safely disconnected via a fuse or circuit breaker. Step B details the electrical connections, showing wire connectors and screw terminals. Step C illustrates the final connection to the power supply.
Technical Data
| Parameter | Value |
|---|---|
| Operating Voltage | 220-240V AC |
| Power | 15W |
| Nominal Luminous Flux | 1,100lm |
| Color Temperature | 4,000K |
| Electrical Protection | IP44 |
| Protection Class | II |
This product contains a light source of energy efficiency class D.
Disposal and Environmental Information
Information for Private Households (WEEE): The German Electrical and Electronic Equipment Act (WEEE) sets requirements for handling electrical and electronic devices. Old, worn-out, or defective equipment is considered waste equipment and must not be disposed of with normal household or residual waste. It should be transferred to special collection and return systems.
Batteries and Illuminants: Owners of old equipment should separate used batteries, accumulators, and light sources that can be removed without damage before returning the equipment. Batteries or accumulators containing hazardous substances are marked with a crossed-out dustbin symbol (e.g., 'Cd' for cadmium, 'Pb' for lead, 'Hg' for mercury). Improper disposal can pose risks to health and the environment. ??
Return Options: Owners can return old equipment free of charge at public collection points or manufacturer/distributor take-back points.
Data Privacy: Old devices may contain sensitive personal data. Users are responsible for deleting this data before disposal.
Meaning of the "Crossed-out Dustbin" Symbol: This symbol indicates that the device must be collected separately from unsorted municipal waste at the end of its service life. ?️?
Cleaning Instructions
Danger: Before cleaning, disconnect the product from the power supply by switching off the circuit breaker or removing the fuse.
Use a slightly damp cloth for cleaning. To avoid damaging the product, prevent water from entering the housing. Never clean the device under running water. Do not use solvent-based cleaners.
Manufacturer Information
SEBSON
Sebastian Sonntag
Walter-Behrendt-Str.10
44329 Dortmund
Germany
Email: support@sebson.de
