Allen + Roth 4-Tier Bookshelf

Package Contents

Description of the diagram showing disassembled parts: The package contains shelves labeled A (1st Shelf), B (2nd Shelf), C (3rd Shelf), and D (4th Shelf), along with frame components: E (Top Left Frame), F (Base Left Frame), G (Top Right Frame), and H (Base Right Frame). Each component is listed with a quantity of 1.

Hardware Contents

Description of hardware visuals: The following hardware is included:

• AA: Wood Screw (Qty. 20) - A standard wood screw.
• BB: Wood Dowel (Qty. 4) - A cylindrical wooden peg.
• CC: Allen Wrench (Qty. 1) - An L-shaped hexagonal wrench.
• DD: L-Bracket (Qty. 2) - A metal bracket shaped like an 'L'.
• EE: Small Screw (Qty. 4) - A smaller type of screw.

Safety Information

Please read and understand this entire manual before attempting to assemble, operate, or install the product.

• Assemble the parts on a soft, non-abrasive surface, such as carpeting, to avoid scratching the finish.
• This unit can hold up to 50 lbs. per shelf. Distribute weight evenly.

Warning

• ⚠️ Do not allow children to climb this product.

Preparation

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 45 minutes

Tools Required for Assembly (included): Allen Wrench

Assembly Instructions

Step 1: Attach top left frame (E) to base left frame (F) using two wood dowels (BB) and 2 wood screws (AA). Tighten with Allen wrench (CC). Do not overtighten wood screws (AA) to avoid cracking the wood. Repeat the same step for the top right frame (G) and base right frame (H).

Hardware Used:

• AA Wood Screw (x 4)
• BB Wood Dowel (x 4)
• CC Allen Wrench (x 1)

Diagram description: Shows frames E and F being joined with dowels BB and screws AA, tightened by wrench CC. This assembly is then mirrored for frames G and H.

Step 2: Attach 1st shelf (A) to the left frame assembly using two wood screws (AA). Secure with Allen wrench (CC). Repeat for 2nd shelf (B), 3rd shelf (C), and 4th shelf (D).

Hardware Used:

• AA Wood Screw (x 8)
• CC Allen Wrench (x 1)

Diagram description: Shows shelves A, B, C, and D being attached to the assembled left frame (E, F) using screws AA and wrench CC.

Step 3: Repeat step 2 for the right frame assembly.

Hardware Used:

• AA Wood Screw (x 8)
• CC Allen Wrench (x 1)

Diagram description: Shows the right frame assembly (G, H) being completed by attaching shelves A, B, C, and D using screws AA and wrench CC.

Step 4: To prevent the shelves from falling, secure the unit to a wall using two L-Brackets (DD) and four small screws (EE).

Hardware Used:

• DD Wood Screw (x 2)
• EE Wood Dowel (x 4)

Diagram description: Shows L-brackets (DD) being attached to the top rear of the bookshelf and secured with screws (EE) for wall mounting.

Care and Maintenance

• Periodically check to make certain all components are properly positioned, free from damage, and firmly connected.
• Wipe clean using a damp cloth and a mild cleaner. Wipe dry with a clean cloth.

Replacement Parts List

For replacement parts, call the customer service department at 1-866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Friday.

Description of diagrams: Visuals of all hardware components (AA-EE) and the assembled bookshelf are shown.